uc used for sale

Type: UC 80 for Max: 80kg flour for maximum: 120kg dough

1 of used bottle cap torque tester, make UCP Universal Closures & Plastics. In case.

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm b-axis: +-115/+30 c-axis: nx360 turning speeds: 20.000 U/min Tool adapter: HSK A 63 rapid traverse: 20 m/min Tools changer: Random 75 Pos. table-size: 350×350 mm table weight: 200 Kg Control: HEIDENHAIN iTNC 530 total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 450 mm, 450 mm

achine details Stock-No. 1105-04026 Type of machine Machining Center - Universal Make MIKRON AGIE CHARMILLES Type UCP 600 Vario Year of manufacture 2006 Type of control CNC Storage location LAGER Country of origin Switzerland Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control iTNC 530 Heidenhain Turning Speed Range - Main Spindle max. 24,000 min/-1 Power capacity - main spindle 30 kW max. torque 91 Nm tool taper HSK-A63 surface area Ø 156 mm swivellable B: -101 / +45 ° rotatable C: 360° Table Speed 200 min/-1 max. workpiece sizes Ø 350 x 450 mm max. workpiece weight 80.0 kg numbers of pallets 10 number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 200 mm Change time < 3.0 sec max. tool weight 6 kg max. total weight 80 kg Rapid Traverse 22 m/min ...

Uchida BC 10 Business Card Cutter The UCHIDA BC-10 business card cutter is a business card cutting machine that works with any high-quality digital photocopier or printing machine to create professionally cut business cards automatically, easily and quickly. Whether you are a small business or a large corporation producing hundreds of cards per day, the innovative innovations applied to the UCHIDA BC-10 will satisfy every need. • Designed exclusively for business cards from A4 paper • Up to 100 business cards per minute • Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper Type Offset, Coated, Glossy Paper Tolerance ±0.1 mm Item condition: used Scope of delivery: as shown (without blade feeding unit & trash box) More items - new and used - can be found in our shop! International shippin ...

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer s ...

Offered are boilers used by WP KneaderUC80 They can also be sold overhauled. Ask for price here.

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, central processing unit -Manufacturer: Schleicher, Master CPU Central Processing Unit -Type: UCN 31306786 -Quantity: 1x module available -Dimensions: 150/35/H200 mm -Weight: 0.6 kg

Plummer block housings, bearing blocks -Condition: unused -Quantity: 4 pieces bearing block with bearing -Type bearing block: NTN 320 - Bearing type: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x available in storage -Price: per piece -Package dimensions: 550/340/H240 mm -Weight: 43 kg

The machine is in good technical condition, testing possible by prior arrangement. 20,000rpm, 24,000 hours, iTNC 530.

2-hole flange bearing -Type: M-UCT205JD1 -Price: per piece -Number: 8x available -Weight: 0.9 kg/piece

Maximum Diameter: 75 mm

Volume (Max): 1000 ml // Volume (Min): 250 ml

Key data: 425 mm, 145 mm, 120 mm

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

used spiral mixer W&P UC80, for 80 kg flour per kettle, in baker's condition (good condition), extendable, 2 clocks, stainless steel kneading arm, with 1 stainless steel kettle, if required with up to 2 other kettles for 2.500€ each

General SKU203W030 LocationBarneveld CEcheck MakeHuber Main Features Heating (medium)Electric Capacity1.5 KW Temp.40 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:R507 Heating capacity1,5 kW Electric capacity230 volt Temperature-10°C/+40°C With pumpcheck Information TypeUC015 Mach.No.43433 Year of construction2000 Mounted on wheelscheck With switchcheck Floorspace0,41x0,50 m Total height0,63 m Weight65 kg Extra Specifications- coolerTemperature control unitsHuberHeat exchangers > Temperature control unitsBrand > Huber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 530 mm, 450 mm, 450 mm

5-Axis CNC Machining Center Mikron UCP 600 Year of Make: 2004 Control: Heidenhain iTNC 530 x-travel: 530 mm y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 12,000 rpm Swivel table STP: Ø 400 mm Tool changer: 30 x Weight: approx. 6.5 t Switch-on hours: approx. 49,000 h Spindle hours: approx. 2,500 h

General SKU376W1122 LocationBarneveld CEcheck MakeHuber Pressure Working pressure4.5 Bar Main Features Heating (medium)Electric Capacity15 KW Temp.40 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric capacity400 V, 19 A max With coolingcheck R507 Capacity15 kW Temperature-20°C+40°C Tank capacity9 l With pumpcheck Capacity90-180 l/min Motor3 kW, 230 V With temperature controllercheck Information TypeUnichiller UC150TW Mach.No.88782/08 Year of construction2008 Mounted on wheelscheck With switchcheck Floorspace0,76x0,80 m Total height1,56 m Weight370 kg Extra SpecificationsRefrigeration: Water cooled, CFC free R507 Cooling capacity at 15°C - 15kW Cooling capacity at 0°C - 15kW Cooling capacity at -10°C - 10kW Cooling capacity at -20°C - 5kW Temperature control unitsHuberHeat exchangers > Tempera ...

Ucon vapour abrasive blasting machine Manufacturer: Ucon Year of Make: 2008 Type: Vapour Abrasive Blasting Machine Working pressure: 6 bar Tank volume: 50 litres Application: Wet blasting for cleaning, paint stripping and surface preparation Features: compact blasting machine with water-air system, suitable for sensitive materials

boring spindle diameter: 130 mm taper: ISO 50-7388/1 milling spindle diameter: 200 mm direct current motor: 22 kW : 10-1600 U/l rapid traverse: der Achsen 6000 m/min z-axis: 800 mm y-axis: 2100 mm x-axis: 3000 mm w-axis: 1500 mm Size of table plate: 1250 x 1500 mm table movement: max. 10000 KG kW : im Eilgang 3,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm   Y-axis travel: 450 mm   Z-axis travel: 450 mm   rotating range B-axis from: -115 °   rotating range B-axis up to: 30 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   clamping surface diameter: 450 mm   workpiece load (max): 200 kg SPINDLE / HEAD   spindle revolutions (max): 20000 /min AXIS DRIVES   rapid traverse X: 22000 mm/min TOOL MAGAZINE   number of positions: 220 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4400 mm   space req ...

Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible.

Boiler Lifter König HK 1100/2400SL for W&P UC80A Boiler - Boiler lifting tipper for Werner & Pfleiderer UC80 A boiler - Manufacturer: König Maschinen - Type: HK 1100 / 2400 SL - 400 volts - 4.5 kW - 50 Hz - Year of construction 2010

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC Parker, Air Filter Air Breather Filter OVP -Type: SPA 7131 AB 687131.UC -Number: 25x air filters available -Price: per piece -Packaging dimensions: 80/80/H75 mm -Weight: 0.1 kg/piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC, Air Filter Air Breather Filter -Type: 40 5 -Number: 4x air filters available -Price: per piece -Dimensions: Ø 77 x 65 mm -Weight: 0.2 kg/piece

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Di ...

Pillow block bearing, with insert bearing NSK UCP212 N AV2S housing: P212 insert bearing: UC212 shaft diameter: Ø 60 mm New ! Dimensions: 240 x 75 x 140 mm

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing NTN UCF216D1 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New !' Dimensions (package): 145 x 130 x 90 mm

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing PAGUS UCF216 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New ! Dimensions (packaging): 145 x 130 x 90 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing EBS UCFL 207 8 pieces ! housing: FL 207 insert bearing: UC 207 shaft diameter: Ø 35 mm Dimensions (single bearing): 160 x 90 x 65 mm New !' Dimensions (Packing): 300 x 180 x 160 mm

With 2 roller conveyors Auction-ID: A1-44905-78

1x Wet and dry vacuum cleaner, container capacity of 32 litres Auction-ID: A1-45187-385

HS DIALOG Digital control Control: Dialog touch 12\" incl. two sonotrodes (1:2 and 1:0.4) incl. additional control Dialog touch 12\" Instruction manual available Auction-ID: A1-45292-41