typ used for sale

Separator GEA Westfalia Type: MSE 100-06-177 Properties: Manufacturer: GEA Westfalia Type MSE 100-06-177 Machines No. 1731-518 Year of construction 2012 Engine power 37 kW Total height 2150 mm Width 1600 mm Length 2000 mm Description: The separator is a cleaning separator to remove solids from milk/juice, etc. No cream separator that separates skim milk and cream! Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2,000 mm Height: 2,150 mm Part 2/3 Control cabinet Dimensions: Width: 800 mm Depth: 400 mm Height: 2,100 mm Part 3/3 Tools

Mazzoni high-performance guillotine type cutter with its own conveyor Dimensions: Mouth width 550 mm Conveyor width 1000 mm Conveyor belt width 600 mm Total length 3000 mm

CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...

Column Drill FLOTT 32 STG Year of Make: 1992 Drilling capacity in steel 32 mm Clamping surface table 500 mm x 360 mm Drilling depth adjustment with digital display Drilling depth 150 mm Spindle mount MK 3 Spindle speeds 140 rpm – 1400 rpm infinitely variable with digital display Drill Table Lighting

Make IXION Type: BST16 Drilling capacity in steel (diameter) 3 - 16 mm Clamping height max. 1500 mm Weight 300 kg Max. clamping height: 1,500 mm Machine weight: 300 kg Drilling capacity: for ST 60: 3.5 mm - 16 mm Ø for GG-20: 3 mm - 16 mm Ø

Offer 24320 Specifications: - Drilling capacity - in steel 13 mm - - in aluminium 15 mm - Drilling spindle holder MK 1 - Drilling depth 70 mm - Projection spindle / column 180 mm - 5 drilling spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - Height adjustment Drilling table with T-slots 250 x 220 mm - Distance between drilling spindle / table approx. 270 mm - Machined base plate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with keyless chuck 1 - 13 mm

Key data: 28 mm, 300 mm

SerrMac Drill TCO 28 Manufacturer: SerrMac (Italy) Year of Make: 2002 Machine Type: Column Drill / Bench Drill Drilling diameter (max.): 28 mm Drilling depth: 150 mm Projection: 300 mm Spindle mount: Morse taper MK3 Speed ranges: 205–325–1050 / 410–650–2100 rpm (via belt drive, 2 gears) Table size: approx. 500 mm length Construction: solid cast construction Drive: Belt drive with manual feed control

SPECIFICATIONS: Installed power: 0.45 kW Voltage: 230 V Spindle speed: max. 2220 rpm CE

Pallet rack, yard, frame height approx. 3.50m to 4m, truss length: 2.70m, - used - : Price (net) from location: only 950 dismantled, packed and loaded: Manufacturer: Hofe Type: SL 25 / RTS 110 Year of Make: 2013 Frame height approx. 3.50m to 4m Frame width: approx. 10cm Truss height: approx. 10cm Frame bracing: screwed Frame depth: approx. 1.10m Number of frames: approx. 9 pieces Bay load: max. 1,600kg Shelf load: max. 1,440kg Field width: 2.70m Trusses: approx. 40 pieces Incl. push-through protection Condition: good Available: from approx. Mid-November Location: Egelsbach Area FFM

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw

Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

Key data: 72 mm

We can offer a W&P extruder. 75/36, year 2004, stopped, working condition.

Key data: 58 mm

We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.

MD-0105 Twin Screw Extruder - Brand: MAPRE - Type: E.2.6.100.22 - Diameter: 100 - Uses 22 L/D - With dispenser - 74 KW motor - Variable speed drive - Electrical panel - With hopper with forced feeder

SPECIFICATIONS: Installed power: 0.55 kW Voltage: 230 V Spindle speed: 3200 rpm

for cutting machine 122 N:, Circular knife shaft complete with 91 knives - 2.8 mm cut,, Flat knife - holder without knife for 2.8 mm cut,, Round knife - shaft with nut, without knife,, Mincer shaft pitch 28 for 10 mm cubes - without knife, Complete list on request

Key data: 22 mm, 60

Single screw extruder 60 with renewed PMA control in 2010 - was replaced by double screw 5 years ago. Works after oil and belt change

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

- Hersteller: HURCO - Model/Typ.: BMC4020HT/M - Baujahr: 1997 - MFG.No.: 029 Verfahrwege: - X-Achse: ~ 1020 mm - Y-Achse: ~ 510 mm - Z-Achse: ~ 610 mm - Steuerung: Ultimax 3 Hauptspindel: - Hauptspindel: max. Drehzahl 8.000 U/min - Hauptspindel Leistung: 15 kW - Werkzeugaufnahme: SK 40 Arbeitstisch: - Tischaufmaße 1220 x 510 mm - max. Tischbelastung ca. 700 kg - Werkzeugwechsler: - Anzahl der Werkzeugplätze 24 Stück - max. Werkzeugdurchmesser 100mm - max. Werkzeuglänge 300mm - max. Werkstückhöhe 250mm (bei einer Werkzeuglänge von 300mm) - max. Werkzeuggewicht 7,0 kg - Maschinengewicht ca. 5,6 to - Standort: demontiert, am Lager D-32825 Blomberg

Proficoater Hymmen PFC-S 1400 Painting system for the application of UV-curing lacquer systems with integrated roller troweling machine Conforms to EC Machinery Directive Coating: from above Operating side: left, Working height: 900 +/- 50 mm, Nominal width Application roll: 1,400 mm, Effective usable width: 1,300 mm, Delivery height: max. 100 mm, Feed rate: 6 - 30 m / min, drive control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Power consumption: approx. 16 kW, Fuse: 63 A on site, Total length: approx. 5.660 mm, Total width: approx. 2,700 mm, Part speed: approx. 12 m / min in reversing mode, Approx. 8 m / min in the flow, Plates: wood panels, Plate length: min. 300 mm, Plate weight: max. 80 kg / m², Varnish: UV paints solvent-free 60 140 DIN4sec, 3 - 40 g / m² depending on the lacquer system and selected program, EX range: The application machine ELX-S is designed for ...

We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.

- Producer Venjakob - Type VEN DRY RZG - Working width 1300 mm - Max. part height 80 mm - Length of flash off tunnel 5000 mm - Volume flow air 5000 m³/h - Heat output 82 kW - Drying temperature 45 Grad - Incl. heat exchanger 90/70 Grad - Transport belttransport 5.200 mm - Location, in stock - Voltage / HZ 400 / 50

We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.

Offer 25521 Double-sided long goods – cantilever rack without contents Technical data: - 2-sided cantilever rack consisting of 10 uprights with plug-in system - Height-adjustable bearing arms - 130 bearing arms - Stand height approx. 6000 mm - Wide stands + support arms approx. 1600 mm - max. arm load approx. 400 kg - Max. drawbar load per support approx. 5000 kg - Center distance of the shelf parts connected to diagonals approx. 1.0 m - Grid spacing for the reg arm - Height adjustment 125 mm - Arm dimensions: L 700 x W 90 x H 70 mm - Stand dimensions W 220 x H 150 mm - Weight per post approx. 400 kg - Weight per arm approx. 10 kg

Reduction and transfer case for conical twin screw extruder Cincinnati Titan 58 Manufacturer: Eisenbeiss on behalf of Cincinnati Extrusiontechnik General overhaul included: • Checking the sprockets for damage with a special camera • New sealing of the drive and output shaft • New shaft bearing • New oil filling • Repainting Condition: overhauled, fully functional

Blowing machine SIPA type SFR EVO3 capacity: 18.000 bph - 0,5 ltr., 1,0 ltr., 1,5 ltr. year of manufacturing: 2017 neck type: PCO 28 - 1810 with 8 cavities incl. preform feeding system incl. preform cooling system Min. - Max. bottle diameter (diagonal): 50 - 125 mm Min. - Max. bottle height (without neck): 80 - 349 mm without high pressure compressor The machine is still in production until the beginning of February 2026.

Blowing machine SIG Corpoplast type Blomax 20 capacity: approx. 30.000 bph year of manufacturing: 2002 min. bottle volume: 200 ml max. bottle volume: 3.000 ml max. bottle diameter: 126 mm max. bottle length: 350 mm min. bottle length: 107 mm incl. preform tipper incl. preform feeding system neck size: PCO 28 incl. spare part package

This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information.

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, its designed for efficient operation. Contact us for more information about this machine.

This STAR SR-20 R II Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 18i-TB control unit and has 7 axis. The machine has a spindle speed of 500-10000 rpm.

This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine.

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.

This 9-axis TSUGAMI TMB 2E swiss type turning machine was manufactured in 2012. It features a main and counter spindle both with speeds up to 6,000 rpm and 11 kW power. The machine includes a 16-position turret and a milling spindle that reaches 10,000 rpm. It supports rapid traverse rates up to 50 m/min on X and Y axes, and 36 m/min on Z-axis. Consider the opportunity to buy this TSUGAMI TMB 2E swiss type turning machine. Contact us for more information.

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.

This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information.

This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information.

This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details.

This TORNOS DECO 20A swiss type turning machine was manufactured in 2006. It features a bar passage of 25.4 mm and can accommodate up to 21 fixed and 15 rotating tools. Included are a ROBOBAR loader and an INDASS conveyor. An automatic extinguishing system ensures safety. Consider the opportunity to buy this TORNOS DECO 20A swiss type turning machine. Contact us for more information.

This 3-axis Correa XB-420 Bed Type Milling Machine was manufactured in 1990. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this Correa XB-420 Bed Type Milling Machine. Contact us for more information.

This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine.

This 3-axis Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine.

This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, its ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine.