We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,438 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
160 kW, max. 7 bar, 28 m3/min.
used
110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.
used
200 kW, max. 10 bar, 32.7 m3/min.
used
132 kW, max. 7.5 bar, 22.74 m3/min.
used
160 kW, max. 10 bar, 18.78 m3/min.
used
50.0 kW, max. 13 bar, 7.9 m3/min.
used
50,0 kW, max. 13 bar, 7,9 m3/min.
used
75.0 kW, max. 10 bar, 10.40 m3/min.
used
30.0 kW, max. 7.5 bar, 4.86 m3/min.
used
110.0 kW, 7.50 bar, 21.90 m3/min
used
75.0 kW, 7.5 bar, 11.30 m3/min
used
250 kW, max. 8 bar, 35 m3/min.
used
Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810
used
Tire houses screw 90 mm - 25 l/d many more screws available from stock, some as good as new
250 kW, max. 7.5 bar, 34.3 m3 rpm, oil-free, air-cooled.
used
132 kW, max. 7,5 bar, 24,2 m3/min, New srew.
used
110 kW, max. 8 bar, 15.5 m3/min.
used
160 kW, max. 7.5 bar, 27.4 m3 rpm, built 1998.
used
160 kW, max. 7,5 bar, 27,4 m3/min, year 1998.
used
M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW
used
Excenter screw pump Fabr. Cheeks, Type 60.4 R-ST
used
132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.
used
in execution with PowerShift Transmission. Tip height 330 mm Top width 1500 mm maximum swing over bed 690 mm Spindle bore 82 mm
used
75 kW, max. 10.0 bar, 10.35 m3/min.
used
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
used
55,0 kW, max. 10 bar, 7,4 m3/min, YOM 1991
used
Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.
used
500 kW, max. 7.5 bar, 83.1 m3 rpm, oil-free, very good condition, with suitable atlas Copco MD 1800 dryer.
used
used
200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.
used
screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI
used
90 kW, max. 8 bar, 16,10 m3/min. Total hours: 13719 Loaded hours: 7703 Condition as new.
used
315.0 kW, max. 8.0 bar, 46.44 m3/min.
used
315,0 kW, max. 8,0 bar, 46,44 m3/min.
used
160.0 kW, max. 7.5 bar, 28.26 m3/min.
used
55.0 kW, max. 7.5 bar, 7.60 m3/min.
used
160,0 kW, max. 7,5 bar, 28,26 m3/min.
used
55,0 kW, max. 7,5 bar, 7,60 m3/min.
used
200.0 kW, max. 7.5 bar, 36.18 m3/min. condition as new. 2 stubble available.
used
200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.
used
; ready for operation
used
75,0 kW, max. 10,0 bar, 10,40 m3/min.
used
75.0 kW, max. 9.8 bar, 11.05 m3/min.
used
75,0 kW, max. 9,8 bar, 11,05 m3/min.
used
90.0 kW, max. 8.0 bar, 15.12 m3/min. With built-in compressed air dryer Kaeltemittel R 404a. Oil, oil filter, air filter and oelab scheider are new.
used
90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.
used
315.0 kW, max. 10.0 bar, 45.70 m3/min.
used
315,0 kW, max. 10,0 bar, 45,70 m3/min.
used
30,0 kW, max. 7,5 bar, 4,86 m3/min.
used
75.0 kW, max. 7.5 bar, 12.60 m3/min.