twin pack used for sale

Packer, Fabr. Joha, type: Diamant 2, 2-head, for 0.33 lt bottle and 0.5 lt bottle in box of 20, year 1995

Technical parameters: Rated voltage: 400V Rated current: 35A Short-circuit power: 65kA Secondary power supply: 24V Phases: 3 Bdt9Rtbmuq Frequency: 50Hz

Centrax Gas Turbine-Generator Package - (USED) 50Hz Fuel Description Bio Gas Only Unit type M2000 KB5S Running hours 126701 Starts 2950 Megawatt hours 349558.0 mwhr Turbine speed 14580 RPM inspection report available

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 21.425 year: 2011

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 20.567 year: 2011

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 14.326 year: 2009

For sale Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line . year: 2014

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system

A cardboard stand for pre-glued cardboard tubes and an associated carton sealer are sold. The system was only serviced and some things were renewed by the manufacturer because the purchase of the new line was questionable. Conveyor belts are also supplied in addition to the carton erector and carton sealer. Photos to follow

Description : Corazza FB 230 butter portion Packer for 7-20g butter hotel size portions. The Corazza FB 230 is capable for forming, filling and wrapping the portions ending up in the collator (Box Packer ) ie. 7g in 200 pcs per box. The machine has been under full rewiring and refurbishment with full strip down. The product feed has twin screw motor driver augers . Paper feed is direct from reel with photo mark sensors. Main parts of filling and product parts are stainless steel . Vacuum pump proving the vacuum for the paper handling and pocket vacuums. Technical Description Make : Corazza Model : FB 230 Filling Volume : 7-20g Cell Dimensions: 30 x 45 mm Speed :0 - 220 pcs per minute Height Adjustment : 7 mm to 18 mm Paper Forming : Single reel that is cut in two parts Product Feed : Hopper Photocell : Paper correction Unit Box Packing : 200 pcs per box ( ...

For sale is a used SOMIC packaging system with 2 fan conveyors (=2 formats). Tubular bags were packed, but other products that arrive horizontally from an infeed conveyor can also be packed. The Somic has a height-adjustable levelling belt where the contents of the tubular bags can be distributed before packaging. Somic had worked with Elau technology in the control area and Elau discontinued these servos and controllers. The Somic can be equipped with new Siemens control technology 1500 and undergo a general overhaul.

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

Efficient and space-saving wraparound carton packaging Manufacturer: Kettner (Krones), modernized by Hormes Type: Wrapapack Output: Up to 18 cycles/min. Format: 6 x 4 bottles (0.33 l) Efficient wraparound carton packaging for the beverage industry The Kettner (Krones) Wrapapack carton packaging machine, modernised by Hormes, offers a reliable and high-performance solution for packaging bottles in wraparound cartons. With an output of up to 18 cycles per minute, this machine is ideal for beverage manufacturers looking for efficient and economical packaging processes.

Vacuum Sealer Machine/Vacuum Device Year of construction not apparent with 1 sweat bar at the front VAC BOX chamber size 430 x 500 x 180mm Vacuum pump 21m3/h without inert gas device incl. mobile undercarriage 400Volt / 50 Hz / 0.75 kW - more vacuum devices in stock!

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

Uhlmann UPS3ET/C130 blister packing & cartoning line for ampoules, etc. comprising UPS3ET blister machine with ampoule feeder, blister size max. 220 x 196 mm (in web travel direction x across web), index length max. 222 mm, forming depth max. 28 mm, reel diameter forming foil 400 mm (on machine) and 700 mm (on unwinding stand), reel diameter lid foil max. 300 mm, thickness of forming foil 0,1 bis 0,5 mm, web width forming foil 115 to 244 mm, web width lid foil 105 to 244 mm, reel core diameter 70/76 mm, Siemens SIMAT S7 PLC, electrics 400V/50Hz, connected load 19kW, compressed air 6-8 bar, machine net weight approx. 4800 kg, capacity 15 to 40 cycles/min., transfer of the blister in-line directly into Uhlmann C-130 horizontal cartoning machine for blisters with blister fedeer suitable for blisters containing ampoules, etc., format range carton min. 30 x 15 x 70 mm, max. 100 x 85 x 150 mm, ...

Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...

Joha packaging machine capacity: 7.000 bph bottle formats: 12 x 0,2 VdF case 6 x 0,7 VdF case 12 x 0,7 VdF case 6 x 1,0 VdF case

Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable The scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: Heights adjustable 01x Worktop, new Material: Multiplex Material thickness: 38 mm Overall width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

Hartmann GBK 220 + Slicer SL30 Bread Slicing and Packing Machine Bread slicer with packaging machine Hartmann GBK 220 - Voltage: 400 volts - Rated current: 13A - Power consumption: 5 kW - Weight: 1500kg Slicer SL30 - Voltage: 400 volts - Rated current: 16 A - Power consumption: 5 kW

2000x1100x1100 mm

Foil Sealing Machine Packaging Minipack Torre FM75 - Foil shrink-wrapping machine - Manufacturer: Minipack Torre - Model: FM-75 - 220 volts - 50 Hz - Mobile on castors

Bag Clipper Clipping Machine Hartmann EC140 Clip - Bag clipper from Hartmann - Model EC / 140 - Series: 905 / 150L - with date BBD stamp - Completely made of stainless steel - Year of construction 2004 - Power consumption : 0.6 kW 50 Hz - Voltage: 230 / 400 power plug - Weight 250 kg

Used cheese packaging line made by CRYOVAC. New: 2004. The line includes: 1)BL60 bagging machine (CRYOVAC, 2004) TECHNICAL DATA: - Weight: 600 kg - Consumption: Compressed air (pressure 6 bar, 30-40 m3/h) - Electricity: 380V, 50Hz, 3F + ground - Installed power: 1kW - Operating conditions: Bag dimensions: Width: min. 130mm - max. 450mm Length: min. 300mm - max. 650mm - Maximum dimensions of product: Height: min. 40mm - max. 220mm Width: min. 50mm - max. 260mm Length: min. 150mm - max. 425mm Weight: 8 kg Cycles per minute: 20 Number of employees: 1 (employee to change bags, products and general inspection) 2) Vacuum packaging machine VR8610 FUROCAVA (CRYOVAC, 2004) TECHNICAL CHARACTERISTICS: - 4 rotary chambers for continuous flow of products at different speeds - Flow of products of different forms and dimensions, is carried out quickly and without use of s ...

Shrink bags are mainly used in the food industry. Food packaged in a shrink bag is placed in a container filled with hot water for a few seconds; during the immersion process, the bag shrinks around the product, keeping it fresh for longer and affecting its appearance. The immersion tank can be operated manually or automatically. On the Inauen VC999 Tank 6241 Shrink Tank, programs can be easily set via a touch screen. The machine is made entirely of stainless steel. Capacity: 12 cycles/min. Programmable cycle time: 5-99 s.

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

Two chamber vacuum packaging machine Komet SD 320, all stainless steel, high performance vacuum pump, electronic control, infeed plates for height adjustment.

Vacuum packer VAMA Specifications: Type: VB 300 Year of Make: 2016 230 Volt / 50 Hz / 10 A / 1.0 kW Weight: 40 kg Chamber size: 320 x 350 x 160 mm Sealing bar length: 310 mm Max. bag size: 300 x 350 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid incl. 3 inserts for different height levels in the chamber High-performance pump with 8 m³ capacity Easy to use Vacuum adjustable Welding time adjustable Stock machine, immediately available! Function checked, condition see original pictures.

Robust construction made of stainless steel and high quality metal alloys. Dual chamber design for maximum efficiency. Cutting welds for accurate and reliable welds. Easy maintenance thanks to removable sealing jaws and service program. Versatile application possibilities for different packaging requirements.

Centrax 501 KB57 DLE Gas Turbine-Generator Package engine overhaul in 2017 at 24 000 hours 372 start service hours 23 000

1 Benhil 250 gr Butter Packing Machine with Bottom Folding No. 195-302 A Output approx. 5 to butter /hour

1 A+F butter carton packaging machine for 10 to 30 g parcels Capacity: 30,000 parcels/h packed in outer cartons Masch. Item No. 98097-A but without butter molding machine, is defective

Ulma Stretch Wrapper Model: Super Chik 2 units available, 1996 & 1997 Regularly serviced and maintained Good condition

Multivac C500 Twin Chamber Vacuum Packer Model: C500 Built 1997/98 Twin chamber Working order

Bag Press/Tamping Machine Designed to compress a bag/product to squeeze air/product down With conveyor Approx 3 years old, excellent condition

Vacuum Packer Make: Multivac Model: C400 Single Chamber x2 units available Built 1998 approx

Automatic Packing Machine, Sealer SIAT / BRÜNINGHAUS Type XL-35-94 / PKarton Gluing Machine, Cardboard Gluer, Semi-Automatic Sealing MachineFabr. No. 19084 Year of construction 2004Box length 160 mm -anyBox height 120-510 mmBox width 120-510 mmPower connection 400 volts, 50 Hz, 260 watts- Manual adjustment of the side conveyor belts for the carton width, via hand crank- carton feed via conveyor belts on the right and left- manual height adjustment of the upper gluing station, via hand crank- glues the

Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible.

Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible.

A Hobart tray packaging machine is available. Product weight min/max: 40g/5kg. On-site inspection is possible.

Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging capacity: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galand ...

Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site

Chamber dimensions X/Y/Z: approx. 460mm/550mm/200mm, welding bars: 4, welding bar length: 440mm, welding seam: double-seam separation sealing, machine dimensions X/Y/Z: approx. 1000mm/950mm/1100mm, weight: approx. 600kg. On-site inspection is possible.

Professional packaging machine from a renowned European manufacturer: -Suitable for adhesive tape width up to 50 mm. -Maximum carton dimensions according to manufacturer's specifications approximately: width 500 mm x height 500 mm; length unlimited. -Double-sided closure of the packages at the top and bottom. -Different cardboard formats are adjusted in height and width via cranks. -Transport speed approx. 20 m / min. Output approx. 800 cartons per hour. -Working height of the machine is infinitely adjustable. The machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams.

A fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) including automatic product mixing of offline products is available. Example of mixed formats: 6-3-3/4-4-4/5-4-3/8-2-2/10-2, max. packaging capacity: 280 jars/min, max. carton erecting capacity: 2.3 cartons/min, mold changeover time: approx. 15min, overall system dimensions X/Y: approx. 16600mm/5800mm, weight of carton erector/packaging unit: approx. 1200kg/7500kg, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Expected to be available from mid/end of July 2025.

Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible.

Automatic packing machine for packing pyramid tea bags and also rectangular and double chamber tea bags into 3-side sealed sachets. With a stack and count output of bags. 5 bags can be output in a group | PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles per minute | dosing volume: 5~40 cm? | tea bag capacity: 1.5-10g | sachet dimensions LxW: 95x90mm (standard), optional: 85x80 / 105x100mm | suitable film for the sachets: heat sealable composite film (BOPP20/VM-PET12 / PE40, Paper / P.E, OPP20 / Pearl35) |power supply: 220V, 50/60Hz | power consumption: 2.1kW | compressed air required: 0.6 MPa | compressed air consumption: 200l/min | machine dimensions LxWxH: 2700x1450x1300 mm | weight: 420kg.

There are 3 used kebab box packaging machines 2x 26 oz machine 1x 16 oz Machine The one 26 oz machine serves as spare parts The other two machines can be tested on site and are still in operation If you are interested, just write to us.