turret punch used for sale

Chuck diameter: 0 mm Collet diameter: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Number of stations: 4 Spindle speeds: number (steps): 11 from: 500 rpm up to: 5000 rpm Machine´s weight about: 100 kg Overall dimensions machine: Length: 700 mm Width: 400 mm Height: 380 mm

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20   CNC Brand: Siemens CNC Model: 810 MACH-id      5198 MAKE          Beyeler Raskin TYPE            RT 210 / 12 YOP              1995 SPECIFICATIONS Table load in kG        400 Kg Working area X Axis        1270 mm Working area Y Axis       1016 mm Working area X Axis with override        2540 mm Punching force        20   T Maximum sheet thickness        6 mm Turret position        20 / 5 BIG Auto indexing positions        5 Positioning speed X and Y Axis       85 mm/min. Change speed revolver  ...

Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20   CNC Brand: Siemens CNC Model: 810 MACH-id     5197 MAKE          Beyeler Raskin TYPE            RT 210 / 12 YOP              1994 SPECIFICATIONS Table load in kG      500 Kg Working area X Axis       1270 mm Working area Y Axis        1016 mm Working area X Axis with override        2540 mm Punching force         20 T Maximum sheet thickness       6 mm Turret position      20 (2 BIG) Auto indexing positions      2 Positioning speed X and Y Axis       85 mm/min. Change speed revolver     40 Rpm Contro ...

Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52   CNC Brand: Siemens CNC Model: 840 D MACH-id      5336 MAKE          Finnpower TYPE            E5 Evolution YOP              2000 SPECIFICATIONS Table load in Kg        200 Kg Working area X Axis       2565 mm Working area Y Axis       1295 mm Punching force          23 T Maximum sheet thickness         4 mm Turret position          52 Auto indexing positions      4 Positioning speed X and Y Axis       90.000 mm/min. Control         SIEMENS 840    D incl. Multi tool 24/8 incl. ...

Pressure: 30 t Sheet length: 2500 mm Sheet width: 1250 mm Positions ATC: 0   CNC Brand: Siemens CNC Model: 840 D Make Rainer OC 3 Type OC 3000 Year 2001 Siemens 840 D !Pressure (metric ton) 30 ton = 6 mm Sheet length (mm) X = 2.500 Sheet width (mm)Y = 1.250 Pos ATC Revolver = 20 Pos Brush table Over taking Under power !- 7 x A Station - 5 x B Station - 2 x C Station - 6 x D Station ( 1 x Multi tool 6 x A)

Pressure: 30 t Sheet length: 1250 mm Sheet width: 750 mm Positions ATC: 0   CNC Brand: Euromac CNC Model: Europunch Make Euromac CX75 Type CX 750 x 30 CNC Year 1995 EUROPUNCH Pressure (metric ton)Force = 30 T Sheet length (mm)L = 1250 Sheet width (mm)W = 750 Pos ATC   Max 6 mm Large tool package 50xPos. accuracy 0,1 mm Rapid feed 30.000 mm/MPower 400 V / 4 kW Fully hydraulic machine Change speed 10 - 15 sec.  

Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.

Power in tons 20 T Metal length 1275.0 mm CNC type MNC 4000 Metal width 1025.0 mm Max steel thickness 6.4 mm Many accessories/tools come along with machine User manuel and documentations are available

- CNC Siemens SINUMERIK 3N with SIMODRIVE 611 - 30 Tn. - 19 standard station + 2 auto-index stations. - New TFT control panel. - 75.000 working hours. - Currently in use. - Sold to make space for a more powerful model.

This TECHNOLASER 2000w Turret punching machine was manufactured in 2005 in Croatia. It has a 2000 W laser generator power, with a maximum X-axis stroke ranging from -10 to 3010 mm and a maximum Y-axis stroke ranging from -10 to 1510 mm. It has a X-axis positioning speed of 100 m/min and a Y-axis positioning speed of 60 m/min. The machine can handle sheets weighing up to 350 kg. Contact us anytime for further information.

Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

Disc turret Sauter, mounting 30 mm, diameter outside approx. 340 mm - see pictures

Year built 2004 OTHER TECHNICAL DATA POWER OF ROTATING TOOLS 4 Kw MACHINE EQUIPMENT Tool holder set supplied DIMENSIONS AND WEIGHT Length 3000 mm Width 2500 mm Height 2010 mm Weight 6700 Kg

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

faceplate diameter:8000 mm swing diameter:10000 mm turning height:4500 mm workpiece weight:120/200 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2300 mm slide stroke:horizontal: 5300 mm cross section of ram:300x300 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:270 t Machine size (LxWxH):14000x10000x9000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the ri ...

- Turning diameter: 250 mm - Center height: 125 mm - Turning length: 800 mm - Speed range: 3,000 rpm - Total power: 9 kW - Machine weight: 650 kg - Space requirements (W x D x H): 1.4 x 0.8 x 1.85 m - Documentation: yes - Condition: very good Details Lever pliers quick clamp chuck mounted on main spindle via intermediate flange. For compression collets type 173E. Otherwise in standard design according to the present original underlay, GDW lever with push button for spindle start, GDW material stop mounted on the grooving carriage behind the center of rotation, monitoring by Beru switch by means of actuating plungers. Ram diameter 5.0 mm, standby light 3-colour with functions: "locked"-"standby"-"operation", GDW set-up key holder for safe bridging of the stop function, very well maintained machine from a workshop for the disabled, little running Accessories SCM collets:  ...

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

Turret milling machine Brand: HESSAPP (Made in Germany) Model: HC-50et Year: 1970 Description: - Table length: 1180x330mm - Spindle turning speeds: 70 - 6000rpm - X axis travel length: 600mm - Y axis travel length: 350mm - Z axis travel length: 500mm

Vertical turret milling machine Manufacturer: LAGUN Model: FTV 5-SP Year of manufacture: 2008 Few working hours, machine in condition like new

The machine is in good technical condition, it is possible to test it by agreement.

Table ø 1000mm Max turning height 1100mm

faceplate diameter:3500 mm swing diameter:3800 mm turning height:2300 mm max. turning diameter:3800 mm table load:40 t table speeds:10 - 38 1/min transmission ratio:2 Stufen cross travel of ram-slide:rechts: 2500 mm cross travel of ram-slide:links: 2200 mm Travel of Ram (vertical):1500 mm total power requirement:70 kW Rams:2 Stück

faceplate diameter:3000 mm swing diameter:3400 mm turning height:3000 mm max. turning diameter:3400 mm max. workpiece weight:25 t weight of the machine ca.:105 t Dimensions (L/W/H):6450x7500x6950 mm

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation

Clamping plate diameter: 3200 mm Max. workpiece diameter: 6300 mm Max. workpiece height: 2500 mm Max. workpiece weight: 5000 kg Stand movement:: 1550 mm Crossbar movement: : 1900 mm

- Work piece maximum diameter: 8500 mm; - Distance between columns: 8500 mm; - Work piece maximum diameter through gantry travel: 11000 mm; - Work piece maximum height: 6000 mm; - Work piece maximum weight on faceplate: 100 tons; Table-Faceplate - Diameter: 6000 mm; - Speeds range (continuously variable): 0-50 rpm; - 4 x 40 kW main motor FANUC make: 160 kW; Fixed table - Dimensions: 3x2000x6000 mm; Gantry - Horizontal travel Y axis: 11800 mm; - Feeds range (continuously variable): 10000 mm/min; Cross rail - Vertical travel W axis: 5200 mm; - Feed range (continuously variable): 0 ÷ 250 mm/min; - Feed motor power: 50 kW; Vertical Rail Head (turning and milling operations) - Vertical ram travel (Z axis): 2700 mm; - Rapid feed speed for Z axis: 10000 mm/min; - Ram cross section: 450x450 mm; - Milling motor power: 40 kW; - Millin ...

VERTICAL LATHE TITAN MOD. SC33 Retrofited in 2003. 2-arm CNC: FAGOR 8050 Maximum diameter: 3,300 mm Table diameter: 3,000 mm. Main motor: 70 KW. Maximum S: 90 RPM (3 speed ranges) Approximate total weight: 47,000 Kg. Chip conveyor. Machine currently working in Industrial Barranquesa

TOS SKJ 12 vertical lathe The machine is technically efficient after replacing the transformer from the table rotation, worn out, requires inspection and feed adjustment Year of manufacture 1987 Documentation in Czech electrical cabinet dmensions 1630x590 mm, weight 675 kg

Machining capacity - Maximum workpiece diameter: 6300 mm; - Maximum height of workpiece to be machined: 4600 mm; - Maximum weight of workpiece: 150000 kg; Faceplate - Faceplate diameter: 6000 mm; - Turning speed range: 30 rpm; - Main motor power: 125 kW; - C axis: 0-360°/min.; Cross rail - Cross rail vertical travel: 3500 mm; - Feed of cross rail: 1000 mm/min.; - Motor power: 18.5 kW; Turning and Milling RAM, 1 piece - Vertical RAM travel, Z1 axis: 2400 mm; - Horizontal RAM travel, X1 axis: 7200 mm; - RAM octagonal section: 310x310 mm; - Maximum milling speed: 3000 rpm; - Maximum milling power: 30 kW; - Maximum torque: 800 Nm; - Milling spindle taper: ISO-50 (DIN69871/DIN69872); - X1/ Z1axes rapid feed: 6000 mm/min; Turning RAM, 1 piece - Vertical RAM travel, Z2 axis: 2400 mm; - Horizontal RAM travel, X2 axis: 7200 mm; - RAM octagonal section: 310x310  ...

Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance

Hwacheon Model: VT-550 2SP Serial No.: M088358K4G E Year of Manufacture: 2010 Maximum spindle speed : 2000 rpm Maximum turning length: Ø700 mm. Spindle height: 1230 mm Maximum tool diameter: Ø26 Magazine capacity: 2 magazines x 12 tools X axis: 350 mm Y axis: Z axis: 790 mm Control: Fanuc Series Oi-TD Machine weight: 13.000 kg (each machine) Power: 75 Kva Running hours: 45963 Hours. Cutting time: 20155 Hours.

Parallel lathe used Brand: AMUTIO Model: HB575 It includes: - Hydraulic plate 3 claws of 240mm - Conventional plate with 3 claws of 250mm - Lunette open Diameter on bench: 575mm Maximum diameter on carriage: 525mm Diameters on transversal carriage: 300mm Height of points: 250mm Distance between points: 1,500mm Bar step: 51mm No. Spindle speeds: 18

Vertical working stroke 435 mm Horizontal X working stroke 520 mm Recirculating ball screws diameter 40 mm Ball screw pitch 8 mm Axis movement motors 12 Newtons On-axis reading system with optional ballscrews optical scales CNC Fanuc Maximum lathe diameter 250 mm Max. put diameter 250 mm Spindle Asa 6 Max. electro spindle power 22 kW Maximum speed 6000 Rpm Maximum torque 119 nm

Three axes + revolver turret with twelve driven tools + automation. Turning diameter: 160 mm Turning height: 150 mm Table/pallet diameter: 100 mm Turning power: 19.5 kW Z axis carriage travel: 375 mm Number of tools: 12 Pallets: Yes Length: 7000 mm Width: 3500 mm Height: 3100 mm Weight: 5500 kg

The chuck is self-centering with 6 jaws and has a diameter of 1000 mm with the possibility of processing pieces up to a size of 1400 mm. The total electrical absorption of the lathe is approximately 130 A and includes: • spindle motor • x and z axis motors • head lubrication pump motors • refrigerant pump motor • hydraulic central pump motor • crosshead motor The CNC on the machine is FAGOR. Electrical diagrams and machine use and maintenance manuals are available

Machine also is fitted with: -Span conveyor ; -Cooling device; -Fairing for cooling device. Last edition CNC Fanuc equipment. Delivery time: 2 months. Please send request for more technical details, price and photos. Machine can be seen in our workshop anytime.

Webster & Bennett 36” Fixed Rail vertical borer Table Diameter 36 ” with a set of standard jaws Max swing 46 ” gripped on the inside Max height under cross rail 23” Travel of ram 22” Cross travel 23” from centre and will travel 2” past centre Table speeds 185 to 400 RPM ( 12 ) Feeds 0.005” to 0.250” per rev ( 12 ) 25 HP main motor Volt 440

Webster & Bennett 72” E-R Series Elevating Rail Table Size 72” / 1828 mm Machine swing 84” / 2133 mm Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. / 127 to 6.35 mm Max Height under cross slide 48” / 1219 mm Max Height under turret 48” / 1219 mm Ram Travel 38” / 965 mm Main motor 40hp /29 kW Newall 2 Axis Digital Read Out

Year of construction 2008 Vertical lathe type Working range 760 mm for two mandarins Spindle motor power 30 37 kW Asa 11 spindle connection Spindle revolutions 25 1500 Turret with 12 positions on each side FANUC numerical control Machine weight 23,500 kg Year 2008

The machine is in good technical condition, testing possible upon agreement. Clamping plate diameter: 1000 mm Max. diameter of peripheral turning: 1150 mm Max. workpiece height: 900 mm Performance of the main engine: 40 kW Machine weight: 12,000 kg

Total machine input:: 83 kW Clamping plate diameter: 2400 mm Max. workpiece diameter: 2600 mm Max. workpiece height: 1600 mm Max. workpiece weight: 15000 kg

The SK 125 carousel is in good technical condition. Can be seen by appointment. Machine weight: 556000 kg Total machine input:: 686 kW Clamping plate diameter: 125 mm Max. workpiece height: 4000 mm Max. workpiece weight: 120 kg Clamping plate speed: 0.35-14 rpm The largest av. lathe. cross and side support.: 12500 mm Avg. clamping plates:: 8000 mm The greatest distance between clamps. plate and knife. side holder support :: 4200 mm Machine dimensions lxwxh: required area 20000x20000x12000 mm