turning used for sale

CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock

Ref.No.00806 Name of the lathe Manufacturer: Böhringer Model VDF DUE 560 Year of construction 2005 Control Heidenhain Manualplus 4110 Swing Above the bed 570mm Over the long face slide 365mm In the bed recess 600mm Reliable workpiece weight for normal main spindle Without the use of sticks 500kg For a setting vise 630kg With two setting vices 800kg Main spindle speeds number 24 With normal main spindle 11.2... 2240 min-1 Step jump 1.25 Commuting Face slider 345mm Upper slider 125mm The tailstock quill 190mm Dimensions Tip height over flat track 280mm Electric drive 15 kW Repair A casting was broken in half, customer has repaired it himself with his own means, so that it works perfectly again Condition under power technically ok Documentation In German - Paper-bound Submission date expected August / September 2024

We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also  ...

Key data: 250 mm, 285 mm, 5 1/min

Precision CNC Lathe Spinner SB - CNC with Siemens 840D Control PLC missing, parameters & circuit diagrams available The Spinner SB - CNC was built in 1996 and is equipped with a reliable Siemens 840D control system. This precise lathe is ideal for a wide range of applications and is characterized by its high performance. Specifications: - Manufacturer: Spinner - Type: SB - CNC - Year of construction: 1996 - Control: Siemens 840D - Travels: X 250 mm, Z 285 mm Spindle: - Max. speed: 5,000 rpm - Spindle passage: 42 mm Revolver: - Number of stations: 12 - Tool holder: VDI16 Dimensions and weight: - Dimensions: 2.1 m x 0.8 m x 1.6 m - Weight: 1,500 kg The Spinner SB - CNC is in a used, but very neat condition. All functions have been carefully checked, and the machine is fully functional. The SB-CNC spinner is ideal for precise machining in a variety of appl ...

Key data: 250 mm, 1000 mm, 380 mm

Hamlet of Commodor AC (Constant cutting speed) Year of construction 2004 Machine no. 3634 Circumferential diameter over bed 380mm Circulation diameter over face carriage 190mm Nominal power 5.5kW Spindle speeds 13-2000 rpm Spindle passage 56mm Center width 1000mm Tailstock MK4 Feed force 10kN Accessories/Equipment: - Three-jaw lathe chuck 200mm - Swivel jaws stepped inside and outside - Multifix B base holder incl. 2 tool holders - Coolant device - 3 axis digital display (hamlet) - Constant cutting speed -Operating instructions - Fixed and rotating bezel - Electrically locked chuck guard - Emergency stop - Multiple bed stops The machine has been technically tested and is in very good condition. The geometry was also checked and found to be very good (measured by the flat web layout) Reversal clearance face carriage 0.15mm Backlash upper slid ...

Gurutzpe Super A lathe. Distance between centers: 6.000mm. Swing: 1020mm. Swing in carriage: 745mm. Swing on gap: 1440mm. Spindle bore: 140mm. Speeds: 16 (9-500rpm). Equipped with 4 independent chuck and steady rest. Equipped with new universal chuck of 500mm. Equipped with new DRO Fagor. Equipped with new Multifix turret. Motorized carriage. CE protections and european certificate for second hand machines.

Machine Type: CNC Lathe Manufacturer: EMCO Model: EMCOTURN 342 Year of construction: 1993 Condition: excellent Offer Type: Used Machine Specifications: Control: Siemens Sinumerik 810 T Working size: Circulation Ø above bed 340 mm, Circulation over face carriage 158 mm, Spindle passage 53 mm, Passage in drawpipe 42 mm Travel range: Carriage travel longitudinal (z) 300 mm Speed range: 0 – 6000 rpm. Propulsion: 9 / 15 kW Remark: Only 5791 switch-on hours! This machine has never been used for metal processing, only fine wood for instrument making. Sauter 8-speed disc turret VDI 30, pneumatically adjustable tailstock MK3 with hydraulic quill, automatic 160 mm Forkardt three-jaw power chuck, 8 tool holders with tools Weight: 2400 kg The machine is in excellent condition and ready for immediate use and can be viewed and demonstrated by us. We would be p ...

Self-aligning rotators capacity driven unit: 60 ton capacity non-driven unit: 60 ton minimum diameter of workpiece: 500 mm maximum diameter of workpiece: 5500 mm roller dia: 559 mm roller width: 127 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 120 ton Coating material on wheels: rubber Length: 3100 mm Width: 1100 mm Height: 2530 mm

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 840 mm Height: 2010 mm

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 830 mm Height: 2010 mm

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

X-travel: 189,2mm, y-travel: 101mm, z-travel: 638,3mm, max. rotational speed: 5000/min, swing over bed: 519mm, controls: FANUC Series 331i-MODEL A, connected load: 81.5kVA, length: 2991mm, width: 2289mm, height: 2089mm, weight: 6.57t, operational hours counter: 11.873h, including documentation and accessories.

Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h.

X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t.

Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site.

X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible.

Max. pallet dimensions: 1200x1000mm, power: 1.5kW, weight: 395kg.

Max. load: 6t, gripping range: 1200-1800mm, connected load: 2.2kW, length: 1000mm, width: 1000mm, weight: 2t, on-site inspection is possible.

Key data: 420 mm, 1500 mm, 210 mm

well-preserved, used lathe Ramo a42 Built in 1987 Rapid traverse for longitudinal and flat Foot brake Circumferential diameter over bed 420 mm Center width 1500 mm Speed range 25-2000 rpm Center height 120 mm Spindle bore 80 mm Quick-change bracket Multifix Coolant device with chip tray Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de

Lathe with 4 tools only for 3-cylinder crank shaft

Available from 01.08.2024

weight max. in kg:3000 kg weight:330 kg Dimensions (L/W/H):800x320x430 mm

weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

Type: Stanko 1516 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 950 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1400 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long : 3170 mm Wide: 3030 mm Height: 4100 mm Weight: 20 ton

Type: Stanko 1512 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 775 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1120 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long : 2750 mm Wide: 2975 mm Height: 4100 mm Weight: 16,5 ton

MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54

VTL 33 CNC exceptional height 3600 UMARO Table diameter: 3000 mm Maximum machining diameter: 3300 mm Maximum working height: 3600 mm Maximum work piece weight: 18 tones

CNC VTL ,2 heads ,2 disc magazines REM SCR 50 CNC 2S

Single-spindle automatic turret make TRAUB type TK 30Machine -No: 159 built in 1979Clamping diameter DIN 6343 up to: 30 mm11 spindle speeds: 400 - 4000 rpm.Crosswise support front / rear: 43/43 mmDrive power: 4.5 / 6.3 kWWeight approx: 1800 kgOutside dimensions approx: 1800 x 900 x 1600 mmWith- Cross support- Copying device- star turretused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Powered tank rotary device unknown makevery heavy versionLoad capacity approx. 50 tRoll diameter: 500 mmRoll width: 120 mmNumber of rolls per set: 3External dimensions approx: 3000 x 2400 x 1100 mmWith- Track rollers for rail movement- Remote Controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Carousel Lathe - Single Stand Schiess 3 DKE 280 Manufacturer: Schiess GmbH overhauled: 2008 Control Siemens ... Sinumerik 840 E workpiece diameter... 3000mm Table diameter ... 2800mm table load ... 18000kg workpiece heights ... 1800mm Axis Z ... 1400mm Tool changer ... 12 Main engine power ... 50kW Machine weight ... 40000kg The machine is in good condition, possible to test under power.

Vertical Turn Miller HOMMA HMT８/10 GTN YEAR 2011 Fanuc-30i MODEL A Gantry Width:10,000mm Max Work dia:10,000mm height:7,200mm Column height:6,500mm X:15,000mm Y:11,300mm Z:3,000mm W:4,200mm Max work weight:250,000kg Table dia:8,000mm ATC: BT60x10, BT50x110 Table:0.1～20min Main spindle：10～1600min Machine weight:700t Height:16.000mm from the floor

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

Circulation diameter over bed ... 500mm Distance between stands ... 2000mm workpiece weight ... 600kg Circulation diameter via support ... 270mm Main engine power ... 5.5kW L x W x H ... 1100 x 3575mm Machine weight ... 1845kg complete general overhaul in 2022, CE certificate, new cover, Machine in good condition, possible to test under power.

workpiece diameter ... 2600mm Table diameter ... 2400mm table load ... 12000kg workpiece height ... 1600mm Axis Z ... 1000mm Main engine power ... 80kW L x W x H ... 10400 x 5050 x 6730mm Machine weight ... 48000kg The machine is in good condition, possible to test under power.

Manufacturer: Maier Type: ML 36 D Year of construction: 2005 Control: GE Fanuc 3li TA Drive power: 16 kw Machining diameter: 36 mm Headstock stroke max.: 220-450 mm Speed: 0-8000 rpm. Number of tool stations: 4 Machine weight: approx. 5 t

Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

KDA 200 Cone rotator Universal G&-4973-M1768

workpiece diameter ... 2150mm Table diameter ... 2000mm maximum table load ... 12 000kg workpiece height ... 1500mm Axis Z ... 1300mm Average of the sanding piece... 250x250mm Pivot of the clamping plate ... 1-150 rpm Main engine power ... 75kW L x W x H ... 3600x4700x7200mm Machine weight ... 31350kg

TOSHIBA SHIBAURA CNC VERTICAL BORING MILL with FANUC 16i-T CNC Control Control: GE Fanuc Series 16i-T Table Diameter: 117.7” (3000mm) Maximum Swing: 141.7” (3600mm) Maximum Weight on Table: 50T (2) Ram Heads L & R Z-Stroke: 48 – 375” Maximum Distance Under Rail: 126.7”(3220mm) Maximum Height under Ram: 119.2”(3030mm) Cross Rail Travel: 79.9” Vertical Ram Stroke Right: 62.9”(1600mm) Vertical Ram Stroke Left: 49.2”(1250mm) Speeds: .32 – 63 RPM Approx. Weight: 125,222 lbs  Equipped With 3000mm dia. Table / GE Fanuc 16i-T CNC Control / (2) Ram Heads

Stock number: 3724 CNC LATHE Manufacturer: GILDEMEISTER, Type: GDM 42 / 2A Machine NO.: 45881, Year of construction: 1989 Specifications: circulation diameter 185 / 290 mm dia. max. rotation. over bed 550 mm dia. Main engine power 22/29 kw Main spindle speed range 40-6300 - 2 step rpm Bore through drawing tube 42 mm dia. X axis movement 190 mm Z Ash movement 450 mm Tool turret with 12 VDI 3425 - 40 mm stations Total power 42.5 kW Total power consumption 45 kva Accessories: Hydraulic main centering chuck 160 mm dia. Chip conveying. Cooling water system. Length: 3300 mm, Høhe: 1800 mm, Width: 2350 mm , Weight: 5300 kg

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

320 x 1000 x 40 mm Zubehor an foto's Machine leaches very well.

Rotary table with C-axis and Y-axis Face disc diameter Ø4000mm Y-axis travel: 2000mm Load capacity: max. 50t speed 70 rpm Master-slave tensioning on C-axis and on Y-axis 2 Siemens motors each 40kW (on C-axis) 2 Siemens motors on Y-axis Without machine control

Rotary table with C-axis and Y-axis Face disc diameter Ø4000mm Y-axis travel: 2000mm Load capacity: max. 50t speed 70 rpm Master-slave tensioning on C-axis and on Y-axis 2 Siemens motors each 40kW (on C-axis) 2 Siemens motors on Y-axis Without machine control