turning machines used for sale

platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...

Table diameter: 1,200 mm Maximum turnerable diameter: 1,350 mm Spindle power: 47.7 Kw Maximum turnable height: 950 mm Table capacity: 6 ton Table rotation speed: 2.22 ÷ 200 rpm Vertical RAM wagon stroke: 1,000 mm Vertical turret wagon stroke: 760 mm Tilt vertical wagons: 35 ° Total weight: 16 ton CNC FAGOR 8055 Year 1979 REVISED IN 2009

Table diameter 1450mm Maximum working diameter 1600mm Maximum height under the crossbar 1000mm Two balanced RAM Quota viewers Machine working in good condition Machine weight 18 ton This morando vertical lathe is in excellent condition and ready to be installed.

CN FAGOR 8055-T Machine equipped with quota viewers, turret 2nd pentagonal wagon Spindle diameter 2,000 mm Maximum turntable height 1,310 mm RAM stroke 1,000 mm Maximum diameter 2,200 mm Spindle Max Speed 150 rpm Nr. 3 wagons type 1 RAM 1 turret 1 side Main engine power 52 kW

Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE

Spindle diameter: 1,100 mm Maximum turnerable diameter: 1,350 mm Maximum flow rate: 3,000 kg Total installed power: 29 Kw Table rotation speed: 200 rpm Maximum working height: 950 mm Tool turret: 5 positions

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

Ø plateau: 1250 mm Top speed: 500 rpm - 2 ranges Ø false plateau: 1450 mm Maximum piece: 1550 mm Maximum height of the piece: 1200 mm RAM stroke: 800 mm Crossbar stroke: 850 mm Tool warehouse: 10 ATC CNC Siemens 810 D

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

Key data: 700 mm

CNC lathe GILDEMEISTER CTX gamma 1250 With control control Siemens 840 D SL with Shop Turn Year of construction: 2009 Travel in X: 480 mm Travel in Z: 1300 mm Spindle bore: 102 mm Turning diameter max. 700 mm Speed range: max. 2500 rpm With the following accessories: Slide protection with interior lighting (automatic sliding hood operation) 12-speed turret with 12 driven tool stations 50 tool holders VDI 50 3 Driven Angle Heads, 2 Driven End Heads C Axis & Spindle Brake (Hydr.), Partial Hollow Clamping Device Tension Tube 104 mm 3 Jaw chuck SMW Autoblock hydraulic (0 500) Direct Displacement Measuring System (X Axis) Tailstock with quill Signal light 4 coloured DMG Netservice on board Coolant system 980 l 8/20 bar with belt filter system Conveyor Coolant spray gun Operating instructions

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

Snb 400x1500p

Key data: 500 mm, 6000 1/min

Fully functional CNC lathe DMG-Gildemeister CTX 310 V3 Year of construction: 2004 Control Heidenhain EP 4290 with ShopTurn 6.4 incl. tailstock C-axis with tool drive Servorevolver – Electrospindle Partial retrieval clamping device Commissioning: 18.01.2005 End of warranty: 17.07.2006 Spindle hours: 21,163.1 h (as of 30.01.2024) Accessories: -LNS Bar Feeder Hydrobar -Mist extraction ifs industrial filter IFMC 1100, year of manufacture 06/2015 -Chip conveyor Bürener Maschinenfabrik SPE 63/30-200 Z60, built in 2004 -All documentation Tools of the plant are not included in the price. The collet chuck for E173 pliers (without pliers) naturally remains on the machine. The plant has no defects and is currently producing on two shifts. The new plant has a delivery date of 12.07.2024. After delivery of the new machine, this machine is available for collection.  ...

:::SPECIFICATIONS::: CNC Model: Fagor CNC Version: 8050 TC Spindle nose: ASA 11 Spindle power: 30Kw Bench drill height: 450mm Turning diameter on bench: 920mm Turning diameter on the undercarriage: 550mm Turning length: 3000mm Number of laps: 1500 Bar clearance: 130mm Mechanical gearbox: yes Number of ranges : 2 Weight between tips: 7800Kg Turret: Manual Number of Tool Turrets: 1 Number of fixed tool positions for the first turret: 1 First Turret X-Axis Travel: 550mm Tailstock: Yes Steerer stroke: 400mm Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 5350mm Width: 2650mm Height: 2000mm Weight: 7800Kg

CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock

Key data: 580 mm, 1000 mm, 400 mm

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...

Ref.No.00806 Name of the lathe Manufacturer: Böhringer Model VDF DUE 560 Year of construction 2005 Control Heidenhain Manualplus 4110 Swing Above the bed 570mm Over the long face slide 365mm In the bed recess 600mm Reliable workpiece weight for normal main spindle Without the use of sticks 500kg For a setting vise 630kg With two setting vices 800kg Main spindle speeds number 24 With normal main spindle 11.2... 2240 min-1 Step jump 1.25 Commuting Face slider 345mm Upper slider 125mm The tailstock quill 190mm Dimensions Tip height over flat track 280mm Electric drive 15 kW Repair A casting was broken in half, customer has repaired it himself with his own means, so that it works perfectly again Condition under power technically ok Documentation In German - Paper-bound Submission date expected August / September 2024

We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also  ...

Key data: 250 mm, 285 mm, 5 1/min

Precision CNC Lathe Spinner SB - CNC with Siemens 840D Control PLC missing, parameters & circuit diagrams available The Spinner SB - CNC was built in 1996 and is equipped with a reliable Siemens 840D control system. This precise lathe is ideal for a wide range of applications and is characterized by its high performance. Specifications: - Manufacturer: Spinner - Type: SB - CNC - Year of construction: 1996 - Control: Siemens 840D - Travels: X 250 mm, Z 285 mm Spindle: - Max. speed: 5,000 rpm - Spindle passage: 42 mm Revolver: - Number of stations: 12 - Tool holder: VDI16 Dimensions and weight: - Dimensions: 2.1 m x 0.8 m x 1.6 m - Weight: 1,500 kg The Spinner SB - CNC is in a used, but very neat condition. All functions have been carefully checked, and the machine is fully functional. The SB-CNC spinner is ideal for precise machining in a variety of appl ...

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Key data: 870 mm, 3000 mm, 500 1/min

Stock number: 3861 CNC LATHE Manufacturer: GEMINIS , Type: CNC 5 870 - 3000 Machine NO.: 5852, Year of manufacture: 1996 Specifications: Max. circulation diameter 870 mm dia. Turning length 3000 mm Turning over paddling slide 560 mm dia. Main spindle speed range 40-500 rpm Spindle bore 300 mm dia. Tool turret with 8 stations Total power 47 kW Control Siemens 840C Fabr. Accessories: Chuck Main Spindle SMW BB-630-325 Hollow Air Chuck mm dia Lining Rear SMW BB-630-325 Hollow Air Chuck mm Chip conveying. Tailstock Length: 6000 mm, Height: 2000 mm, Width: 2500 mm, Weight: 7000 kg

Inv. Num. : 7400 Type: GT 2100 Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC Maximum turning length: 562 mm Max. turning diameter: 390 mm Maximum turning diameter over bed: 600 mm Maximum travel length in the X-axis: 230 mm Maximum feed rate in the Z-axis: 580 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Number of tools: 10 pieces Length: 3890 mm Width: 1628 mm Height: 1700 mm Weight: 3500 kg Equipment: Technical Documentation Conveyor Shovel Collets Bake Knife Collet head Universal three-jaw head Cutter head with 10 positions Programmable tip/spring 2023/3: Replacement of bearings in the spindle

Key data: 380 mm, 500 mm, 4500 1/min

Machine Details Stock-No. 1105-03994 Type of machine CNC Lathe Make GOODWAY Type GA 200 Year of manufacture 2002 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EXW -free on truck Technical details turning diameter 500 mm turning length 500 mm Control Fanuc 18 T greates pass round over bed 380 mm centre distance 500 mm X-Travel Plan Top 210/ mm Z-Travel longitudinal 520 mm Spindle Bore 65 mm turning speeds 4500 rpm total power requirement 21 kVA Weight of the machine approx. 3.5 t Additional information equipment: with out chuck 2 star turret with 12 tool stations coolant basin, measuring arm Swarf Conveyor transformer (L:1,0xB:0,46xH:0,86m) machine can be demonstrated under power

Key data: 450 mm, 525 mm, 3500 1/min

Machine Details Stock-No. 1105-03995 Type of machine CNC Lathe - Inclined Bed Type Make MORI SEIKI Type SL 1 A Year of manufacture 1988 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time by appointment Freight base ex stock HAGUENAU FRANCE Price Technical details Travel -X Axis 230 mm turning diameter 450 mm turning length 525 mm control FANUC 10 T Spindle Bore: Ø 42 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 7.5 kW spindle nose A2-5 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid traverse 15 m/min total power requirement 12 kW Weight of the machine approx. 4000 kg Additional information Machine in good condition CONTROL FANUC 10 T 3 JAW CHUCK TAILSTOCK COMPLET

Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range  ...

Immediately available from location : CNC lathe TRAUB Type TND 300 Built in 1991 CNC control TX 8 F Spindle bore 42 mm Circulation over bed 400 mm Circulation via flat carriage 170 Revolver 12 speed 6 powered tools Tailstock Turning length 500 mm Lining 160 mm Drive power 18 kw Spindle speeds 56 – 5600 rpm Drive driven tools 3 / 5 kw Speed driven tools 6000 rpm Conveyor Coolant system Weight 3.8 tons Dimensions: 2498/1990/2005 mm Prior sale and errors excepted. The machine is sold as it stands in the hall. The buyer can view the machine under power with connection options. Currently, it is not energized.

Key data: 600 mm, 1250 mm, 3500 1/min

Machine Details Stock-No. 1105-03997 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2007 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information acc.: hydr. 3-Jaw Chuck 400 mm, Chip Conveyor, Coolant CNC FANUC 210 IS

Key data: 680 mm, 1100 mm, 3500 1/min

Machine Details Stock-No. 1105-03998 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 510 Year of manufacture 2009 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 465 mm turning length 1150 mm Control Fanuc 32 I greates pass round over bed 680 mm swing diameter over face slide 565 mm turning speed range 3500 1/min Torque max. 750 Nm rapid travel range X 30 / Z 25 m/min spindle 42 / 31 kW turret head 12 pos. VDI 40 SAUTER Spindle Bore 90 mm total power requirement 65 kVA weight of the machine approx. 8.1 t Additional information NICE MACHINE 2 AXIS FANUC 32 3-Jaw-Chuck chipconveyor, TAILSTOCK Accessories: 12 PCS Tools,

Key data: 460 mm, 400 mm, 460 mm

Control: Fanuc 32 iTB - Turning length: 400 mm - Turning diameter: 460 mm - Circulation diameter over carriage 460 mm - Tool holder directly - Tool turret with 12 positions Equipment - Rear chip conveyor with double chain - Electronic handwheel - High pressure coolant pump (6 bar 55l/min) - High pressure coolant pump (15 bar 55l/min) - 3- Jaws power chuck in main spindle - Hydraulic hollow clamping cylinder - Special gantry enclosure - GL6 – 2 axle CNC gantry loader with a Capacity of 2 x3 KG (Travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets, each with 13 auto-centering support rods

Key data: 320 mm, 600 mm, 3500 1/min

Stock-No. 1105-03841 Type of machine CNC Lathe - Inclined Bed Type Make LEADWELL Type LTC 20 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time by appointment Freight basis EX WORK Price Technical details turning diameter 300 mm turning length 600 mm control Fanuc O- T Travel -X Axis 175 mm Spindle Bore: Ø 50 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 11/15 kW spindle nose A2-6 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid Traverse 12 / 15 m/min total power requirement 30 kW Additional information CNC FANUC OT turret 12 tols TAILSTOCK CHUCK Chip Convoyer

Key data: 300 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04001 Type of machine CNC Lathe - Inclined Bed Type Make HARDINGE Type CONQUEST T 51 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 300 mm turning length 500 mm control fanuc 18 T max. swing diameter 400 mm spindle head A 2-5 Bar Material Dia. 51 mm turning speed range 4000 rpm spindle drive 11/15 kW Torque 168 Nm Tool Diameter 32 mm Rapid traverse 30 m/min total power requirement 15 kW weight of the machine approx. 3.2 t dimensions of the machine approx. 2.0 x 1.7 x 1.8 m Accessories cooling attachment Additional information FANUC 18T CONTROL 3 JAWE CHUCK + taistock CHIP CONVOYER

Key data: 250 mm, 1000 mm, 380 mm

Hamlet of Commodor AC (Constant cutting speed) Year of construction 2004 Machine no. 3634 Circumferential diameter over bed 380mm Circulation diameter over face carriage 190mm Nominal power 5.5kW Spindle speeds 13-2000 rpm Spindle passage 56mm Center width 1000mm Tailstock MK4 Feed force 10kN Accessories/Equipment: - Three-jaw lathe chuck 200mm - Swivel jaws stepped inside and outside - Multifix B base holder incl. 2 tool holders - Coolant device - 3 axis digital display (hamlet) - Constant cutting speed -Operating instructions - Fixed and rotating bezel - Electrically locked chuck guard - Emergency stop - Multiple bed stops The machine has been technically tested and is in very good condition. The geometry was also checked and found to be very good (measured by the flat web layout) Reversal clearance face carriage 0.15mm Backlash upper slid ...

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Inv. Num. : 7468 Type: SL-253BMC/500 Producer: DMG MORI SEIKI Created: 2000 Parameters: Control System: Fanuc MSX-501III Duty cycle: 58953 h Hours: 4810 h Maximum turning length: 485 mm Maximum turning diameter over bed: 254 mm Maximum feed speed axis X: 1260 mm/min Maximum feed speed axis Z: 1260 mm/min Minimum main spindle speed: 35 1/min Maximum spindle speed: 3500 1/min Number of tools: 12 pieces Number of axle: 3 Axis X: 235 mm Z axis: 495 mm Rapid traverse of the X and Z axes: 18000/24000 mm/min Total power requirement: 33.6 kW Length: 2405 mm Width: 1760 mm Height: 1890 mm Weight: 4600 kg Equipment: Driven Tools (X/Z) Kitagawa BB210 Chuck 2018: General overhaul of the control system

Key data: 530 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50

Machine Type: CNC Lathe Manufacturer: EMCO Model: EMCOTURN 342 Year of construction: 1993 Condition: excellent Offer Type: Used Machine Specifications: Control: Siemens Sinumerik 810 T Working size: Circulation Ø above bed 340 mm, Circulation over face carriage 158 mm, Spindle passage 53 mm, Passage in drawpipe 42 mm Travel range: Carriage travel longitudinal (z) 300 mm Speed range: 0 – 6000 rpm. Propulsion: 9 / 15 kW Remark: Only 5791 switch-on hours! This machine has never been used for metal processing, only fine wood for instrument making. Sauter 8-speed disc turret VDI 30, pneumatically adjustable tailstock MK3 with hydraulic quill, automatic 160 mm Forkardt three-jaw power chuck, 8 tool holders with tools Weight: 2400 kg The machine is in excellent condition and ready for immediate use and can be viewed and demonstrated by us. We would be p ...

With C axis Controller Siemens 840D Turning length:581 mm Turning diameter over cross slide:330 mm Turning diameter:200 mm Spindle speed (min.):5,000 rpm Spindle bore:68 mm Travel distance X-axis: 160 mm Travel distance Z-axis: 450 mm

Key data: 420 mm, 1500 mm, 210 mm

well-preserved, used lathe Ramo a42 Built in 1987 Rapid traverse for longitudinal and flat Foot brake Circumferential diameter over bed 420 mm Center width 1500 mm Speed range 25-2000 rpm Center height 120 mm Spindle bore 80 mm Quick-change bracket Multifix Coolant device with chip tray Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

Tecno-V 30 CNC Motorised NCl, year 2001, Mitsubishi Meldas CNC , 2 turrets, turret 1. 12 stations all motorised, turret 2. 6 stations z-axis only, VDI30, bar passage 42, Bellegrandi collet holder, Lemca Boss 545 loader. Manuals, Machine in production. Very fast.

Lathe Mantegazza 315

Lathe Mantegazza 410

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Parallel lathe NILES DLZ 400 IV Between points: 1000 mm Maxi Ø on bench: 420 mm Maxi Ø over saddle: 225 mm Spindle diameter: Ø 52 mm Spindle speed: from 45 to 2240 RPM 3-jaws chuck Ø 250 mm (interchangeable jaws) Threadings: Metric + Whitworth Tailstock: CM5 Rapid on X Lubricant pump Voltage: 380 V Length: 3000 mm Depth: 1500 mm Total height: 1600 mm Weight: approx 2,5 T

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...