turning machines used for sale

- First ownership: from own use and first hand - Center height: 180 mm - Center width: 1000 mm - Diameter over bed: 360 mm - Bed width: 250 mm - Diameter of the main spindle: 42 mm - Control: Fagor 8055 TC - Constant cutting speed: 100-4000 rpm - Working feed Z.X: 0-7000 mm/min - Rapid traverse Z.X: 10 m/min - Main engine 5.5 kW

Cycle-controlled CNC lathe CONTUR DIALOG H630/2000 – HACO TUR630 MN - First ownership: from own use and first hand - Orbit diameter over bed: 630 mm - Center width: 2000 mm - Control: SIEMENS Sinumerik 810D with ManualTurn - Speed range: 5-2500 rpm - Rapid traverse X/Z axis: 10 m/min - Engine power S6: 18.5 kW - Monitor failed, add-on monitor in use - Operating instructions/documentation - Electric visit - Various multifix holders as accessories - Forkhardtfutter ø315

CNC lathe Spinner TS66H-SMC - with driven tools - with counter spindle - Control Siemens 840 D - incl. chip conveyor - Turning diameter over bed: 685 mm - Tip distance: 526 mm - Travel distances: X 240 mm / Z 640 mm / W 520 mm - Rapid traverse (X, Z, B): 18 / 24 / 24 m/min

Machine Details Stock number 1105-03806 Machine type CNC lathe - inclined bed machine Make MONFORTS Type RNC 400 AC Year of construction 2001 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from HAGUENAU FRANCE Technical details Turning diameter 420 mm Turning length 600 mm Control SIEMENS 810 D Speed range 70 - 4000 rpm Information With C axis and driven tool holders Tool carrier disc turret VDI 40 (12pcs), bore 40 mm; Power clamping futte DIA 315 MM, chip conveyor coolant device, TAILSTOCK CNC SIEMENS 810 D 24 KW 4000 RPM good condition WITH ACCESSORIES

Type: 9375 Retrofitted in 2017 with Siemens 840D - max diameter to be turned to centre: 6100 mm - max workpiece height under arm: 2600 mm - vertical travel of ram: 1250 mm - horizontal travel of ram: 1250 mm - swivelangle of tooldhead: 45° + 30° - turntable is movable in order to accomodate workpieces up to 6 meter in diameter - max load on table: 50 ton Chuck dia.: 3300 mm Max turningdia -- passage: 6300 mm Power on the spindle: 75 HP Max hight of workpiece Z-axis: 2600 mm Command: Siemens 840D Number of speeds: 0.60 > 60 rpm Weight: 93 ton TOOLING: yes

Pfiffner HB32/ 16 Year of construction: 2008 Control: SIMATIC S7/ Sinumerik 840D Number of stations: 16 pieces Number of processing stations Horizontal max. 16 Vertical max. 8 Total units 24 Current occupancy 13 stations with hydraulic units 2 stations for loading and unloading 1 station empty of the 13 stations with hydraulic units are 9 purely hydraulic with a feed Z remaining 4 defeated further NC axes Rotary indexing: 16 pieces Switching times: 0.7s Collets Number: 16 Type: B32 clamping diameter: 32mm workpiece length: 150mm Accessories Suction, chip conveyor, parts feed Weight machine approx. 6,5to

Type: SKD 32 B Tablediameter: 3200 mm Max load on table: 50 ton Vertical travel of cross-beam: 2100 mm 2 toolheads on cross-beam - horizontal movement of toolhead nr1: 1400 mm - vertical movement of toolhead nr1: 1500 mm - horizontal movement of toolhead nr2: 1980 mm - vertical movement of toolhead nr2: 1350 mm - swivelangle of tooldhead: -/+ 30° Chuck dia.: 3200 mm Max turningdia -- passage: 3500 mm Power on the spindle: 120 kW Command: Siemens 840D Number of speeds: 1 > 22 rpm / 22 > 80 rpm Power needed: 195 kVa Long : 10045 mm Wide: 8120 mm Height: 7155 mm Weight: 65 ton

GENERAL Project No.: 905471 Quantity: 1 pcs. Manufacturer: TAKISAWA Type: TT 500 GD Control: Fanuc 0i TF Year of construction: 2018 Condition: Used machine Approx. (hrs) control: 22,918 Program run approx. (hours): 7.112 DESCRIPTION TURN turning diameter 50 mm turning length 50 mm 2 pcs. main spindle(s) – front loading speed main spindle 8000 1/min power main spindle at ED 10-40/100% 7.5/3.7 kW Spindle passage main spindle 37 mm Spindle diameter in front bearing Main spindle 80 mm Spindle flange size main spindle 80 F Travel in X/Z 250/300 mm rapid traverse speed in X/Z 20/24 m/min Full clamping cylinder on the main spindle Coolant supplied through the main spindle Pneumatic workpiece system control left and right Fixed block tool holder Number of stations/powered 5/0 ADDITIONAL EQUIPMENT Tool breakage monitoring Splash guard cladding with ful ...

Turning diameter: 900 mm Turning length: 5000 mm Spindle bore: 155 mm Motor power: 18 HP/kW CNC Brand: Fagor Swing over bed Ø:        900mm Swing over cross slide Ø:600mm DBC Turning Length:      5000mm Spindle bore:            155mm Spindle power:           18.5kW Bed width:               480mm Tailstock spindle Ø:     105Ø Stroke pinole:           150mm Spindle taper:           5Mk Workpiece weight:        2500 Speeds / ranges:         1000Rpm Length:                  8500mm Width:                   2400mm Height:  &nbs ...

DORRIES VCE 2400/200 MC/FC 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Plate dia.: 2000 mm Max. turning dia.: 2520 mm Max. turning height: 1990 mm Ram travel: 1500 mm Main drive motor: 75 kW Live spindle: Spindle rotations: 45 - 1500 1/min Spindle motor: 15kW Max. workpiece weight: 12 Ton Tool magazine: 16(turning)+16 (drilling) Station Automatic Tool Changer Auto tool probe Auto detail probe Pallet changer with 3 pallets (turning plates) Table rotation (2 ranges): 1. 2,5 – 70 2. 10-280 Machine space required: 11000 x 11000 mm Video before dismatling

Type: SC 33 - Morando license Table diameter: 3000 mm Max swing: 3300 mm Max workpiece height: 2300 mm Max load on table: 18 ton Power on table: 60 kW Table speed: 1,02 gt; 92 rpm 1st VERTICAL SUPPORT Ram section: 236 x 230 mm Vertical travel of the support: 1500 mm 2d VERTICAL SUPPORT with automatic turret with 5 positions Vertical travel of the support: 1000 mm nbsp; Chuck dia.: 3000 mm Max turningdia -- passage: 3300 mm Power on the spindle: 60 kW Digital screen: Axom Evolution 3 Number of speeds: 1,02 > 92 rpm Weight: 48 ton

Used / cleaned CNC lathe with different clamping axes. Tools on the moulds are not included. Optical tool measurement. Optional instruction manual available.

Stock number: 3760 LATHE Manufacturer: TRENS - TOS, Type: SN 50C - 2000 Machine NO.: 08005020060214, Year of construction: 2006 Specifications: Turning length 2000 mm Center height 250 mm Turning over bed 500 mm Ø Turning in recess 700 mm Ø Spindle bore 52 mm Ø Spindle speeds 22-2000 rpm Spindle motor power 5.5 kW Accessories: Tailstock Digital display Jenix - Ikke monteret - not mounted dkk 10.000.- Multi-tool holder Centering chuck mm Ø Universal lining mm Ø Fixed bezel mm Ø Length: 3640 mm, Height: 1540 mm, Width: 1100 mm, Weight: 1890 kg

Parallel Lathe SOCOMO Between points: 1000 mm Maxi Ø on bench: Ø 400 mm Maxi Ø over saddle: Ø 200 mm Spindle diameter: Ø 41 mm Spindle speed: from 45 to 2000 RPM Square turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM4 Auto feeds X - Y Lubricant tank Voltage: 380 V Dimensions (L x W x H): 2200 x 1100 x 1700 mm Weight: approx 1,5 T

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

CNC LATHE Condition Used Very good condition Control type Fanuc 0i-TD X axis stroke 280 mm Y-axis travel ± 60 mm Z axis stroke 790 mm rotating diameter Ø 700 mm rotating diameter on pallet Ø 550 mm Turning diameter Ø 254-420 mm working length 637 mm Self-centering diameter Ø 250 mm Spindle connection ASA 2-8 Spindle speed 3,500 rpm Spindle power 22/18,5 Kw Spindle hole Ø 90 mm Bar passage Ø 76 mm Indexing 0.001° Tool turret 12 motorized positions Chip Evacuator Accessories

Turning diameter: 280 mm Turning height: 210 mm Chuck diameter: 210 mm Number of chucks: 1   CNC Brand: Okuma CNC Model: OSP-P200L X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm  In feed table Out feed table Package jaws Package tool holders  Chip conveyor Coolant system 9 Bar Grundfos Max. turning Ø:280mm Table  Ø:      210mm ATC / revolver:12 Speeds / ranges:4000Rpm C-Axis:        360000°  

Turning diameter: 0 mm Turning height: 290 mm Chuck diameter: 72 mm Number of chucks: 3   CNC Brand: Okuma CNC Model: OSP-200 X Travel 290 Z Travel 590 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm  In feed table Out feed table Package jaws Package tool holders  Chip conveyor Coolant system 9 Bar Grundfos 

- Max. Machining Dia. 2630 mm - table dia. 2000 mm - machining height under cross rail 1500 mm - Workpiece weight 12,000 kg - plate speed 1 -140 rpm - right working support (turret) vertical travel (Z axis) 760 mm - left working support vertical travel (Z axis) 1200 mm - Working feed range 0.05-5 mm/red. - machine weight 36 tons Siemens Control SINUMERIK

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

OPTIturn L 44 CNC Lathe Year 2019 Sinumerik 828 D - Kühlmittelpumpe 270 Watt, Tankinhalt 90 Liter - Verfahrweg Z-Achse 760mm ; Verfahrweg Y-Achse 250mm - Umlauf – Ø über Planschlitten 240mm; Umlauf – Ø über Maschinenbett 446mm; - Spindelaufnahme DIN ISO 702-1 Nr. 5 - Hydraulikaggregat 750 Watt, Tankinhalt 50 Liter - Werkzeugrevolver hydraulisch, VDI 30 mit 8 Werkzeugplätzen - Reitstock - Wärmetauscher - Elektronisches Handrad - inkl. Maschinenfüsse - Tool Box CD von Siemens - Elektrischer Anschluss, 23 KVA Drehstrom 400V ~ 50Hz

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Circumferential diameter above bed ... 1250mm Top width ... 460mm workpiece weight ... 1600kg Face plate diameter ... 1000mm Main engine power... 18.5kW Machine weight ... 6500kg The machine is in good condition, possible to test under electricity.

Control Heidenhain ... CNC pilot Turning diameter ... 600mm Turning length ... 700mm inclined bed Axis Y ... 100mm Spindle bore ... 77mm Spindle speed... 0-5000 rpm L x W x H ... 3590x2160x2050mm Machine weight ... 5500kg The machine is in good condition, possible to test under electricity.

Turning diameter: 800 mm Turning length: 1500 mm Spindle bore: 130 mm Motor power: 15 HP/kW Swing over bed Ø:        800mm Swing over cross slide Ø:470mm Swing in the gap Ø:      1400mm DBC Turning Length:      1500mm Gap length:              750mm Spindle bore:            130mm Spindle power:           15kW Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Speeds / ranges:         600Rpm Length:                  4500mm Width:              & ...

Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Manufacturer: WMW Type: DLZ 630x2500 E IV Stock number: 0979 Year of construction: 1965 Turning length: 2500 mm Orbit diameter over bed: 630 mm Speed: 1455 rpm Voltage: 380 V Motor power: 10 kW Dimensions (LxWxH): 4800 x 1900 x 1750 mm Machine weight: 4.85 t

Machine Details Stock number 1105-03844 Machine type CNC lathe Make CINCINNATI Type HAWK TC 150 Year of construction 1998 Control type CNC Storage location FRANCE Country of origin UK Delivery time IMMEDIATELY Freight Base EX WORK Technical details Turning length 400 mm Turning diameter over bed 300 mm Turning diameter above the paddling carriage 250 mm Speed range 5500 rpm Passage 51 mm Information Control FANUC 21 T TURNING LENGTH 4000 MMM SPINDLE 7.5 KW WITH 51 ROD PASSAGE Tool changer: 12-fold / VDI 30 Drive power: 11 KW LINING + TAILSTOCK + CHIP CONVOYE

For sale: Geminis CNC 5 Plus 870/3000 CNC /cycles turning machine with a Fagor 800 T controller. The turning diameter above the bed is 870 mm, the turning diameter above the cross carriage is 560 mm. The tip distance is 3,000 mm. The machine comes with two bezels. The chuck diameter is 800 mm. A second chuck is mounted on the other side of the spindle box. The spindle passage is 150 mm. The machine is in good condition. Available from stock, subject to prior sale.

Inv. Num. : 6203 Type: E160A Producer: Hyundai Generated: 2018 Parameters: Control system: FANUC i-series Operating hours: 5042 h Switch-on hours: 2531 h Maximum turning length: 300 mm turning diameter: 280 mm Maximum length travel in the X-axis: 165 mm Maximum feed in the Z-axis: 330 mm Maximum main spindle power: 11 kW Maximum spindle speed: 6000 1/min Equipment: Bar feeder Autobar (diameter 65 mm/length 1 meter/year 2018) C-axis Conveyor Tool holder Chuck CNC tailstock Tools

Inv. Num. : 6180 Type: LFS 10 – 2SP Producer: OKUMA Produced: 1999 Parameters: Control system: OSP 7000 L Switch-on hours: 35000 h turning diameter: 120 mm Maximum turning diameter over bed: 400 mm Axis X: 130 mm Axis Z: 145 mm Length: 1900 mm Width: 1760 mm Height: 2500 mm Weight: 4800 kg Equipment: Conveyor Tool holder

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Manufacturer | Manufacturer: Stanko Type | Type: 16k20 Stock Number | Stock Number: 0980 Year of construction | Year of manufacture: 1978 Turning length | Turning length: 1000 mm Swing diameter over bed | Swing diameter over bed: 440 mm Spindelbohrung Spindle bore: 50 mm RPM | turning speed: 12.5 - 1600 rpm Tension | Voltage: 380 V Engine power | Drive power: 10 kW Dimensions (LxWxH) | Dimensions (LxWxH): 2800 x 1200 x 1800 mm Weight Machine | Weight of machine: 2,5 t

- Digital display Heidenhain. - Accessories available. Center height 165 mm Circumference over bed 330 mm Turning length 630 mm Circulation over support 200 mm Speed 40 - 2500 rpm Drive power 2.2 kW Weight approx. 1100 kg

- TRAUB control TX 8F - Spindle passage 42 mm - Working spindle speed: 40 - 4,000 rpm - 4 piercing slides: stroke 60 mm - 8-fold revolver - High-pressure pump 25 bar - Backside machining (2 spindles) - Bar feeder (3 m) -Conveyor

Machine Details Stock-No. 1105-03853 Type of machine CNC Lathe Make MORI SEIKI Type NLX 2500/700 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter 356 mm turning length 705 mm control MORI SLIM LIN X-AXIS 260 mm Z-AXIS 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm Turret change time 0.25 sec. tailstock 734 mm slide. of quill 80 mm rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine app ...

Vertical lathe - single column SKJ 32-63 Manufacturer: CKD Blansko Year: 1988 Max. workpiece diameter ... 6300mm Rotary table diameter ... 3200mm Max. table load ... 40000kg Max. workpiece height ... 2500mm Axis Z ... 1600mm Axis X ... 2200mm L x W x H ... 11500 x 8600 x 8875 (7000)mm Machine weight... 55000kg 2ha7bwzv Main engine power ... 80kW The machine is in good condition, possible to test under power.

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Turning diameter: 1700 mm Turning length: 1700 mm Spindle bore: 1700 mm Motor power: 10 HP/kW CNC Brand: _Unknown / Other Steady rest Skoda SR-3 Center height 1700 mm Can be extended or shortend to matching height as they are 2 ps Central lubrication Each steady rest equipped with 3 point Driven/Morotized units Length:1800mm Width:1700mm Height:2100mm Weight:2600kg 

1 pc CNC lathe MAZAK QT 200 MS Year of construction: 2020 Mazatrol Smooth G Max. turning diameter 380 mm Max. swing diameter 695 mm Distance between clamping jaws 575 mm Max. rod passage 65 mm Travel X/Z/W 234/625/585 mm Main spindle 26/22 kW Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Counter spindle 11/7.5 kW Counter spindle Max. speed 6,000 rpm Counter spindle spindle nose A2-5 12-fold tool turret, 12 driven tool stations, 5.5 kW Max. speed: 5,000 rpm Overload monitoring Additional coolant nozzle main spindle 15 bar high-pressure pump Preparation for oil mist extraction Robot Interface (Advance/Profibus) Drilling cycle with torque-dependent clamping fracture Chip conveyor with low discharge height Hollow clamping cylinder counter spindle Hainbuch collet chuck clamping top Nova Axfix mini size 52 main spindle Hainbuch collet chuck clampin ...

Machining diameter 500 mm max. turning diameter 660 mm Workpiece length 300 mm ----------------------------------------------- Working axes Total stroke X-axis 1180 mm Working stroke X-axis 370 mm Working stroke z-axis 400 mm ------------------------------------------------ Electrospindle Spindle speed up to 1600 1/min Max. power 46 KW Max. torque 2517 Nm CNC control Siemens 840D Driven tool stations Coolant system Conveyor Air extraction system

High precision tower SCHAUBLIN type 150 TECHNICAL SPECIFICATIONS: Year: 1998 Number of axes: 2 X-axis stroke: 180 [mm] Z-axis stroke: 600 [mm] Z-axis fast forward speed: 4000 [mm/min] Tip distance: 600 [mm] Peak height: 150 [mm] Diameter allowed above the bench: 340 [mm] Permissible diameter above trolley: 177 [mm] Spindle nose: CAMLOCK D 1-4'' Inner pin cone: CM5 Spindle for clamping pliers: B32 Spindle passage diameter: 40 [mm] Mini speed. Pin: 55 [rpm] Maximum speed. Pin: 3000 [rpm] Pin power: 4 [kW] Cone: CM5 Metric pitch range: 0.25 - 14 [mm] English pitch range: 112 - 1/2" [nets/inch] Modular pitches: 0.12 - 7.5 [modules] Watering tray capacity: 29 [l] Installed capacity: 6 [kVA] Supply voltage: 400 [V] Dimensions: 1730 x 970 x 1300 [mm] Weight: 1250 [kg] EQUIPMENT INCLUDED: x1 visualization HEIDENHAIN type ND780 (2 axes) x44 SCHAUBLIN B32 clamp ...

Gurutzpe Super BT lathe. Distance between centers: 8.000mm. Swing: 2.000mm. Swing in carriage: 1.680mm. Swing on gap: 2.360mm. Spindle bore: 102mm. Equipped with chuck and steady rest. DRO Fagor. CE protections and european certificate for second hand machines.

Stock Number: 3788 CNC LATHE manufacturer: OKUMA , Type: LVT 400 M - Vertical Machine NO.: 134682, Year of manufacture: 2007 Specifications: Max. swing diameter 480 mm dia. Turning length 300 mm Main engine power 22/15 kw Main spindle speed range 35-3300 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Powered stations turret 1 12 pieces. Driven werkzeuumdr. 30-3000 rpm Control OSP Fabr. Controlled in 3 axes Operating hours spindle 14910 hours Accessories: Load and Unload device Hydr. Chuck Main Spindle OSP P-200 3D-M Kit mm dia Tool setter Chip conveying. Cooling water system. Length: 3500 mm, Height: 2680 mm, Width: 2800 mm, Weight: 9,100 kg

Control: Fanuc 310 i, Max bar diameter [mm]: 25, Number of linear axis + C axis: 6 + 2, Spindle speed [rpm]: 10.000, Spindle motor [kW]: 3,7, Z - travel [mm]: 80 | 300, X - travel mm: 50 | 240, Y - travel [mm]: 350 | 120, High pressure coolant: 20 bar, Auto bar loader: FMB Turbo 3-26/3200, Machine weight approx. [kg]: 3.800

Machine Details Stock-No. 1105-03860 Type of machine CNC Lathe Make MORI SEIKI Type SL 150 Year of manufacture 1996 Type of control CNC Storage location Warehouse Country of origin Japan Delivery time immediately Freight basis ex Warehouse, free on truck Price Technical details turning diameter 420 mm centre distance 580 mm Turning length max. 500 mm Travel X / Y 230 / 520 mm spindle turning speed range 50 - 5000 rpm spindle nose JIS A2-5 bar diameter round max 42 mm spindle bearing diameter 90 mm tool turret - number of stations 12 (12) Tool Taper 20 x 20 tailstock adjustment 515 mm tailstock quill diameter 85 mm tailstock quill taper MT 4 tailstock travel 120 mm Rapid Travel - Longitudinal/Face 24 / 18 m/min Coolant Tank 160 L connected load 21 kVA Weight of the machine approx. 4.1 t dimensions of the machine approx. 7.5 x 2.5 x 1.8 m Additional infor ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Machine Details Stock-No. 1105-03863 Type of machine Lathe - cycle-controlled Make CAZENEUVE Type MAXICA HC 725 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin France Delivery time immediately Freight basis EX WORK Technical details turning diameter 725 mm turning length 4000 mm control SOMAB PL + S5 + -SOMAB turning dia. Over Face-Slide 670 mm turning diameter over cross slideways 390 mm main drive motor 16 kW spindle turning speed range 2500 rpm Spindle Passage 82 mm Chucking diameter 315 mm taper in tailstock MT 5 total power requirement 30 kW Weight of the machine approx. 5 t Additional information Machine in WORKING CONDITION with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size WITH STEADY

Inv. Num. : 6670 Type: MASTURN MT 54 Producer: MAS Created: 2003 Parameters: Control system: Heidenhaim TE 4110 MP Max. turning length: 800 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 310 mm Maximum spindle speed: 3000 1/min Tool head: Duplomatic VDi30 Spindle bore: 80 mm Spindle taper: MORSE 5 Number of tool head positions: 8 Length: 3300 mm Width: 2500 mm Height: 1700 mm Weight: 2600 kg Equipment: Technical Documentation Tool holder Bake

Mario Carnaghi CNC Vertical Boring Mill FEATURES: Siemens 840DE SL CNC Control 12-Position Automatic Tool & Attachment Changer 40-Station Automatic Tool Magazine Hydrostatic Table Vertical Ram with Milling Spindle Vertical Milling & Drilling Attachment Right Angle Milling Attachment Universal Milling Attachment Through Spindle Coolant & Flood Coolant Dual Dive 108 HP (81 KW) Table Motors High Resolution Heidenhain Scales & Encoder Renishaw RMP 60 Probe Renishaw NC-4 Milling Tool Probe Full Machine & Operator Enclosure Chip Conveyor CAPACITY: Table Diameter 196.85" (5000mm) Turning Diameter .. 236.22" (6000mm) Maximum Turning Height 98.42" (2500mm) Maximum Stroke of Vertical Rams ... 59.05" (1500mm) Ram Cross Section . 13.77" x 13.77" (350x350mm) Cross Rail Travel . 47.24" (1200mm) Ram Saddle Travel, X-Axis . 175" (4445mm) Turning Tool .. Capto C8  ...