turning lathe used for sale

The roughing and copying steels are provided with fine adjustments. Template adjustment can be adjusted from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feeds for turning highly profiled workpieces. Drive motor 400V/3kW with electric motor brake Two speed levels can be adjusted via belt belts, within the stages it is possible to work continuously via frequency converter. Speed level 1: 200 - 2000 rpm Speed level 2: 350 - 3400 rpm Center width approx. 1550mm Copy length with bezel approx. 1350mm Bed length approx. 2100mm Feed infinitely adjustable, rapid decline with safety limit shutdown Hydraulic copy carriage with V-lathe steel Spindle with M33 thread and MK3 inner cone Tailstock MK3 and with quick-release device Lots of accessories: Ring bezel with pre-turning steel and insertion aid Four-ja ...

Maximum turning diameter: 2800 mm Maximum swing diameter: 3000 mm diameter of spindle flange: 1100 mm control: Siemens 840 D sl Table rpm: 230 1/min Maximum speed of driven tools: 6000 1/min x-travel: 2700 mm z-travel: 1000 mm Feed - X: 24 m/min feed capacity - x: 22 kN tool taper: CAPTO C8 total power requirement: 200 kVA dimensions of the machine ca.: 10,4 x 6.3 x 5,7 m weight of the machine ca.: 120 t Equipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufacturer: Emco Type: Emcomat EM17D Year of Make: 1996 Travel: X 220 mm Z 710 mm Working spindle Speed: 3,000 rpm Spindle bore: 50 mm Rotary diameter over bed: 340 mm Rotary diameter over slide: 190 mm Turning length: 700 mm Spindle holder: DIN55029 Tool holder: Multifix B Quill stroke: 120 mm Dimensions and weight Dimensions: 1,650 mm x 1,060 mm x 1,635 mm Weight: approx. 755 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tailstock MK3 3-jaw chuck Schunk 4-jaw chuck Face Plate 4x Multifix holder B

turning diameter: 1000 mm turning length: 1000 mm swing diameter over bed slide: 255 mm spindle head: 6 spindle bore: 56 mm dimensions of the machine ca.: 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter of the table: 3000 mm turning diameter: Max. 5500 mm column travel: 1000 mm passage: Querbalken 1000 max. mm Passage height: Vertikalschlitten 1854 ma mm table turning speeds: 82 U/min table load: max. 25 t weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the  ...

Inv. Num. : 9289 Type: Tandem 400 Producer: FAMAR Created: 2013 Parameters: Table diameter: 480 mm Max. workpiece diameter: 400 mm Max. length of the workpiece: 300 mm Number of Spindles: 2

Key data: 700 mm, 7000 mm

Inv. Num. : 9290 Type: LHDS Producer: LIEBER Created: 1992 Parameters: Maximum turning length: 7000 mm Maximum turning diameter over bed: 700 mm Lathe chuck diameter: 400 mm Equipment: 3x self-centering bezel Milling head Support Tip Tool Holder

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 € : 2623.32 € : 1020 mm : 2000 mm : 510 mm : 358 mm : 770 mm : 560 mm : 361 MK : 12 : 6,3 - 315 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 505 mm : 270 mm : 105 mm : 6 MK : 225 mm : 18.5 kW : 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amest ...

PITTLER PV 1250 / 2-2P CNC-Drehbearbeitungszentrum mit Siemens SINUMERIK 840D sl Steuerung. Leistungsstarke Vertikaldrehmaschine für die Komplettbearbeitung großer rotationssymmetrischer Werkstücke bis Ø 1.250 mm. Ausgestattet mit zwei 12-fach-Revolvern, zwei Werkzeugmagazinen, Späneförderern, Kühlschmierstoff-Filteranlage, Emulsionsnebelabsaugung sowie Werkstückmesstaster. Die Maschine überzeugt durch hohe Stabilität, Präzision und Produktivität und eignet sich ideal für den Einsatz im Maschinenbau, der Energie- und Antriebstechnik sowie der Großteilbearbeitung. Spindeln: 2 Stück Motorspindeln Spindelleistung: 52 kW (pro Spindel) Max. Spindeldrehzahl: 500 U/min Max. Drehmoment: 12.000 Nm (40% ED) Verfahrwege (X/Z): 1.620 mm / 1.000 mm Werkzeugrevolver: 2 × 12-fach VDI-60 Angetriebene Werkzeuge: bis 5.000 U/min Max. Drehdurchmesser: ca. 1.200 mm Max. Umlaufdurchmesser:  ...

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm swing diameter: 680 mm turning height: 600 mm z-axis: 500 mm x-axis: 560 mm drive of main spindle: 65/80 kW main spindle speeds:: 2800 workpiece tool changer: 12 Plätze feeds z-axis: 0,01-30.000 mm/min feeds x-axis: 0,01-45.000 mm/min chuck: Rota NCR 630 mm coolant: voltage: 400 V frequency: 50 Hz control: Siemens 840 D pl chip conveyor: kW total power requirement: 140 A weight of the machine ca.: 18 t dimensions of the machine ca.: 6,5 x 3,8 x 4,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 250 mm centre distance: 1.300 mm engine: 1,4 kW Heavy-duty copying lathe (or copying woodturning lathe) Hapfo Model AP 5000/ME for precise woodturning and copying of wooden workpieces. Ideal for single-piece and batch production of stair balusters, railing posts, table legs, and furniture parts, the ME model features an electric feed mechanism for consistent machining results. Includes a wide range of accessories. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 € : 2147.42 € : 800 mm : 2000 mm : 400 mm : 260 mm : 560 mm : 560 mm : 318 MK : 12 : 8 - 400 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 11 kW : 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra ty ...

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

IN THE RETROFITTING PHASE Height tips 900 mm Point distance 7,000 mm Turnerable diameter on the bench 1,850 mm Turnerable diameter on trolley 1,350 mm Turnerable diameter on recess 2,150 mm Bench width 1,000 mm Bar passage diameter 206 mm ASA A1 15" spindle attachment Top speed 300 RPM Diameter of the tank counterpoint 220 mm Row stroke counterpoint 450 mm Withworth threads - metrics - diametrics - module Weight allowed between tips without lunettes 15 ton Weight allowed between tips with a 20-ton bezel

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm

Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 5000 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS

turning diameter over bed: 490 mm turning diameter over slide rest: 280 mm turning length: 2000 mm centre height: 245 mm centre distance: 2000 mm spindle bore: 62 mm total power requirement: 7,5 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Dreh-Øüber Bett: 320 mm Dreh-Øüber Support: 185 mm turning length: 1000 mm Spindelbohrungs -Ø/ Aufnahme: 32 mm mm spindle turning speed range: (12) 85 - 2000 U/min feeds - longitudinal: 0,006 - 1,77 mm/min feeds - cross: 0,003 - 0,888 mm/min thread - mm pitch: 0,1 - 28 mm thread - module: 0,1 - 1,75 mm thread - inch: 2,5 - 75 inch. voltage: 400 V / 50 Hz power capacity: 2,2 kW weight of the machine ca.: 0.8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 540 mm turning diameter over slide rest: 270 mm turning length: 2500 mm spindle passage: 60 mm turning speeds: 600 U/min Rapid travel: steady for max. workpiece diameter from: 270 mm steady for max. workpiece diameter from: 170 mm faceplate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.