turning center used for sale

turning diameter: 42 / 140 mm turning length: 170 mm control: Mitsubishi Meldas turning speeds: 80-8.000 U/min c-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetrieben turning speeds: 45-4.500 U/min gripping station: 42 mm spindle: 1 kW turning speeds: 60-6.000 U/min c-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 . Number of working hours: 10769 h chip conveyor: ja/yes Bj. 2018 total power requirement: 7,5 / 11 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders (see picture) 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construct ...

turning diameter: 660/275 mm turning length: 1498 mm control: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm 9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Island ...

turning diameter: 420 mm turning length: 650 mm control: Okuma OSP-U100L spindle bore: 95 mm spindle turning speed range: 2800 U/min travel -x axis: 300 mm travel -z axis: 675 mm main drive motor: 22/30 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2700 x 1900 x 1885 mm First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 310 mm turning length: 600 mm control: Sinumerik 810 D PL Siemens turning diameter over bed: 425 mm Main spindle: turning speed range - main spindle: 500 - 4.500 min/-1 max. Torque: 280 Nm power capacity - main spindel: 16,5 kW Spindle diameter: 100 mm C-Axis: 360 ° chucking diameter: 210-52 mm spindle bearing diameter: 120 mm clamping cylinder: 65 mm Bar feed: max. 65 / (52) mm spindle nose: A8 DIN 55026 axis stroke:: x-axis: 230 mm z-axis: 740 mm rapid traverse X-axis: 15 m/min rapid traverse Z-axis: 24 m/min turret:: tool positions turret: 12 pos. driven statition: 12 pos. tool taper: VDI 30 DIN 69880 Spindle speed driven tools: 6.000 min -1 power capacity - driven tools: 3,7 kW max. Torque: 9,5 Nm tail stock: dia. of quill: MK 4 80 mm quill stroke: 120 mm tailstock adjustment: 475 mm tension force: 500 daN total power requirement: - kW weight of the machine ca. ...

turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 370 mm turning length: 424 mm control: MSX-711-IV Mori Seiki swing diameter: 370 mm X1- Axis: 380 mm X2- Axis: 155 mm Z1- Axis: 460+155 mm Z2- Axis: 610 mm y-axis: +/- 105 mm B - axis: +/- 120 ° bar material dia.: 65 mm speed spindle max.: S1 5.000 / S2 6.000 U/min. spindle bore: S1/S2 65/38 mm : 12000 1/min tool taper: Capto C5 toolpiece magazine: chain magazine: 76 Stück tool turret with 10 work positions: total power requirement: 45 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X,Y,Z,B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000 The data for this ad was create ...

turning diameter: 820 mm turning length: 6000 mm control: Siemens Si 840 D sl max. workpiece weight between centres: 4000 kg total power requirement: 155 kW weight of the machine ca.: 65 t dimensions of the machine ca.: 16350 x 3700 x 3850 m Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torqu ...

turning diameter: 400 mm turning length: - mm control: DMG Mori SLIMline z-axis: ca. 750–755 mm x-axis: 276 mm y-axis: +/-60 mm greates pass round over bed: 700 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The machine is in very good condition and has recently been inspected and measured by a service technician. The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, and counter-spindle CNC control: DMG Mori SLIMline multi-touch control (19/Operate 4.7 on Siemens) Screen language: German/English Main spindle: A2-8 with AC motor Drive power 25.5/17 kW (40/100% duty cycle) Spindle speed 4000 rpm Hollow clamping system, max. bar capacity 80 mm Counter-spindle: A2-6 designed as a built-in motor spindle ISM 52 with hydraulic clamping device Drive power 14/13 kW (100/40% duty cycle) Spindl ...

Key data: 660 mm, 1500 mm

X-axis 580 mm Y-axis 150 mm Z-axis 1,545 mm B-axis -30 to 210° W-axis 1,490 mm Main spindle Drive power 22 kW Max. spindle speed 4,600 rpm Max. bar passage 52 mm Sub-spindle Drive power 18.5 kW Max. spindle speed 5,000 rpm Milling spindle Drive power 18.5 kW Max. spindle speed 12,000 rpm B-axis 0.0001° Interface for bar feeder Parts catcher Chip conveyor 50 bar high pressure pump 5-axis simultaneous machining Full C-axis bending spindle Gear Hobbing, Abwalfräsem Milling spindle synchronized threading Cylinder interpolation Preparation for multiple and flash tool holders 1 pcs LNS Quick Load Servo 3 Short Bar Loader

turning diameter: 275 mm turning length: 900 mm control: TRAUB TX8i-s spindle passage: 65 mm spindle turning speed - stepless: 1 - 5.000 U/min spindle diameter in front bearing: 110 mm C-axis: 1 - 500 U/min x-axis: 175 mm z-axis: 650/975 mm y-axis: +/- 40 mm rapid traverse X/Y/Z: 20 / 40 / 20 m/min feed capacity X/Y/Z: 5,5 / 5,5 / 10 kN tool turret - number of stations: 10 number of driven tools: 10 mm toolpiece turning speed range: 1 - 6.000 U/min power capacity at 25 % load: 5,50 kW max. torque at 25% load: 17,50 Nm tool taper DIN 69880: Ø30x55 spindle diameter in front bearing: 110 mm total power requirement: 95,00 kW weight of the machine ca.: 16,00 t dimensions of the machine ca.: 10,00 x 3,50 x H3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILDEMEISTER - CTX 310 V3 Offer details Stock number 1039-9126 Machine type: CNC turning and milling center Manufacturer: GILDEMEISTER Type CTX 310 V3 Year of construction 2003 Control 840 D Siemens Country of origin Italy Additional information CNC turning and milling center GILDEMEISTER - CTX 310 V3 - Incl. 2x reducing tubes Technical details Turning diameter 210 mm Turning length 580 mm Control 840 D Siemens Center height 190 mm Turning diameter over bed 330 mm Turning diameter above the face slide 260 mm Main spindle: Speed range - main spindle max. 4,000 rpm/-1 Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable rod diameter 51 mm C - Axis 0.001 ° Travels: Travel - x 185 mm Travel - z 455 mm Tool turret: Number of tool positions 12 pos. Tool holder VDI 30 Driven tool stations: 6 pos. Tailstock: Tailsto ...

OKUMA - MacTurn 50 Offer details Stock number 1039-9061 Machine type: CNC turning and milling center Manufacturer OKUMA Type MacTurn 50 Year of construction 2000 Control OSP 7000 L Storage location D-59302 Oelde Country of origin: Japan Delivery time by arrangement Freight base from location Additional information CNC - Turning and milling center OKUMA - MacTurn 50 Technical details max. turning diameter 580 mm Turning length 1500 mm Control OSP 7000 L Circumferential diameter over bed 610 mm Circumferential diameter over carriage 580 mm Main spindle: Speed range - main spindle 12 - 2,800 rpm/-1 Spindle bearing diameter 150 mm Spindle bore 110 mm Spindle nose JIS A2-11 Drive power - main spindle 37 (30) kW C-axis 0.001 ° Travels: x-axis 598 mm y-axis 230 (+110 / -120) mm z-axis 1,660 mm Feeds: Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: ...

Mori Seiki NL2500Y/700 CNC Drehmaschine (02/2008) Hersteller: Mori Seiki Typ: NL2500Y/700 Baujahr: 02/2008 Zustand: gebraucht, sehr gut, in Produktion Drehdurchmesser 275 mm Drehlänge 705 mm Steuerung MAPPS II MSX 850 Umlaufdurchmesser über Bett 923,8 mm Umlaufdurchmesser über Planschlitten 755 mm max. Drehdurchmesser 356 mm max. Stangendurchmesser 80 mm Hauptspindel Drehzahlbereich ? Hauptspindel 4.000 U/min Antriebsleistung ? Hauptspindel 26 / 22 kW Spindelnase JIS A2-8 Spindelbohrung 91 mm Spindellagerdurchmesser 140 mm C-Achse 0,001 ° Verfahrweg x-Achse 260 mm z-Achse 795 mm y-Achse 100 (+/- 50) mm Revolver Werkzeugplätze 12 Pos. Schafthöhe für Vierkantwerkzeug 25 mm Schaftdurchmesser für Bohrstange max. 50 mm Revolverschaltzeit 0,25 sec. Drehzahlbereich der angetr. Werkzeuge 6.000 min -1 Antriebsleistung ? angetr. Werkzeuge 5,5 / 3,7 kW Vorschub ...

- Control: SIEMENS SINUMERIK 840-C - Max. rod Ø: 65 mm - C-axis - Turntable main spindle: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Revolver 2: 8 stations, 4 of which are powered - Speed applied Operating time: 4,000 1/min - Both turrets with internal cooling - High-pressure system - Chip conveyors - Bar feeder IRCO SiMag 65 - Max. rod length: 3200 mm Dimensions LxWxH: - Machine 3400 x 1700 x 1800 mm - Bar feeder 4000 x 1000 x 1400 mm - Chip conveyor 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg

General Description CNC flat-bed turning center manufactured by HAWCTON , model CP632 . Designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a FANUC CNC control, hydraulic chuck and tailstock for general production machining. Technical Details Manufacturer: HAWCTON Model: CP632 Machine type: CNC flat-bed turning center FANUC operator panel and CNC control 3-jaw hydraulic chuck Tailstock Hydraulic unit Complete electrical cabinet FANUC electronics Full safety enclosure Coolant system Condition Used industrial condition. The machine appears complete with FANUC control system, hydraulic chuck, tailstock, hydraulic unit, electrical cabinet, safety enclosure and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-49124-35

Technical details Type: CNC turning center Control system: ZIT Sistema 500T Configuration: - Horizontal CNC lathe - Fully enclosed machining area - 10-station hydraulic indexing turret - Tailstock installed - CNC-controlled longitudinal and cross axes - Electrical control cabinet - Hydraulic unit - Coolant enclosure Application: - CNC turning - Facing - Boring - Thread cutting - Precision machining of rotational components Construction: - Heavy-duty cast-iron machine bed - Early-generation CNC control system - Automatic turret indexing Dimensions: - Length: Approx. 3300 mm - Width: Approx. 1900 mm - Height: Approx. 2100 mm Weight: Approx. 4200 kg Condition: Used Observed condition: - Machine appears substantially complete - 10-station hydraulic turret installed - Tailstock present - CNC electronics and electrical cabinet installed - Hydraulic chuck missi ...

General Description Horizontal CNC turning center designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic turret, programmable tailstock and chip conveyor for efficient production machining. Technical Details Machine type: CNC turning center Horizontal CNC lathe 8-station hydraulic turret Hydraulic tailstock Fanuc-based CNC control Chip conveyor Coolant system Condition Used industrial condition. The machine appears complete with hydraulic turret, hydraulic tailstock, Fanuc-based CNC control, chip conveyor and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-49124-31

General Description Horizontal CNC turning center designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a 12-station hydraulic turret, hydraulic chuck and chip conveyor for efficient production machining. Technical Details Machine type: CNC turning center Horizontal CNC lathe 12-station hydraulic turret Hydraulic chuck Older monochrome CNC control Chip conveyor Coolant system Condition Used industrial condition. The machine appears complete with hydraulic chuck, 12-station turret, chip conveyor and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-49124-32

Technical details Type: CNC turning center Control system: ZIT Sistema 500T Configuration: - Horizontal CNC lathe - Semi-enclosed machining area - Hydraulic power chuck - 6-station hydraulic indexing turret - CNC-controlled longitudinal and cross axes - Electrical control cabinet - Hydraulic unit - Coolant enclosure Application: - CNC turning - Facing - Boring - Thread cutting - Precision machining of rotational components Construction: - Heavy-duty cast-iron machine bed - Early-generation CNC control system - Automatic turret indexing Dimensions: - Length: Approx. 3200 mm - Width: Approx. 1800 mm - Height: Approx. 2000 mm Weight: Approx. 3800 kg Condition: Used Observed condition: - Machine appears mechanically complete - Hydraulic chuck and 6-station turret installed - CNC electronics and electrical cabinet present - Hydraulic unit installed - Heavy du ...

Machine number: 34101101 Operating voltage: 400 V Rated current: 128 A Frequency: 50 Hz Power: 89 kVA Operating hours read: 2782 Turning length: 3000 mm Center height above floor: 1270 mm Circulation diameter over slide top: 520 mm Circulation diameter over telescopic left: 520 mm Circulation diameter over steady rest slide: 520 mm Main spindle left, spindle diameter in front bearing: 160 mm Spindle bore: 77 mm Spindle speed: 4000 rpm Torque: max. 630 Nm tailstock moving built-in centering tip: MK 5 tailstock Quill diameter: 135 mm Starting force: 200 to 1200 daN Max. workpiece weight: 1000 kg Turning-drilling-milling unit Drive power: 15 kW Torque: max. 190 Nm Tool holder: HSK 63 The machine is equipped with a tailstock, a moving steady rest SMW Autoblock and a three-jaw chuck RÖHM, diameter: 310 mm incl. matching workshop cabinet and workbench with large items Documentation max. tool  ...

turning diameter: . mm turning length: 2000 mm control: Siemens 840 D sl mainspindle: turning speed max.: 3800 1/min mainspindle: torque max.: 1200 Nm tailstock:: diameter of quill: 140 mm center point: MK6 quill power: 5 - 30 kN feed rate Z-axis: 0,1 - 30000 mm/min rapid traverse Z-axis: 40 m/min feed rate X-axis: 0,1 - 18000 mm/min rapid traverse X-axis: 25 m/min total power requirement: 125 kW weight of the machine ca.: 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BIGLIA B565 SM (2014) is a two-spindle CNC turning center, equipped with a GE Fanuc Series 32i MODEL B control and an S+M configuration with sub-spindle and rotating tools. Capabilities: Maximum turning diameter: 290 mm Maximum turning length: 560 mm Main spindle bar passage: Ø 65 mm Passage diameter above the bed: 580 mm Main pin: Speed: 30 to 4,000 RPM Spindle Nose: ASA 6\" Spindle Bore: 76 mm Chuck: 210 / 250 mm Engine power: 26 kW / 15 kW C-axis resolution: 0.001° Sub-spindle (S): Speed: 30 to 5,000 rpm Spindle Nose: ASA 5\" Chuck: 165 mm Engine power: 11 kW B-axis stroke: approx. 560 mm Turret and rotating tools (M): 12 positions, all motorizable Index time: 0.15 s Rotating tool speed: 30 to 4,000 rpm (6,000 rpm optional) Rotating tool power: 5.5 kW Tool section: 25 ...

Manufacturer GEMINI Model GHT 6 G2 1,300 x 3,000 Year 2007 CNC FAGOR 8055 TC/C Capabilities Max. turning on bed 1,300 mm. Maximum turntable diameter 1,300 mm. Ø Max. Turning on Transverse Carriage 940 mm. Distance between points 3,000 mm. Axles Fast Forward X-Axis, Z 8 m/min C-axis and motorized tools INCLUDED Head Speed 0-800 rpm No. of automatic ranges 4 Main engine power 46 kW Nose Type DIN-55026-B11 Head shank pitch 104 mm. Turret Turret Positions 8 Turret type VDI 50 (Ø 470 mm) Power of motorized tools 5.5 kW Counterpoint Tailstock shank diameter 180 mm Tailstock shaft course 300 mm Additional equipment Universal 3-jaw plate Ø 900 mm. INCLUDED 3-point bezel Ø 750 mm INCLUDED 3 Point Bezel Ø 400 mm INCLUDED 2 Pcs. Axial motorized tool holder INCLUDED 1 Pc. radial motorized tool holder INCLUDED 20 VDI 50 TOOL HOLDERS INCLUDED Air conditi ...

General Manufacturer: Doosan Type: Lynx 2100LMSA Year of manufacture: 2018 Control: Fanuc iSeries Travel: X 205 mm Z 560 mm Rapid traverse X/Z: 30/36 m/min Capacity Turning diameter: max. 300 mm Turning length: max 510 mm Main spindle Spindle speed: 6,000 rpm Spindle power: 15 kW Spindle Torque: 127 Nm Revolver Number of tools: 12 Dimensions and weight Dimensions: L 2,805 mm x H 1,693 mm x W 1,595 mm Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Boss 552 32 L Bar Feeder, Year 2018 Sub-spindle AGW Tool holder BMT45 Parts catcher

General Manufacturer: Doosan Type: Puma 2100MS Year of Make: 2011 Control: Fanuc iSeries Travel: X 260 mm Z 590 mm Rapid traverse X/Z: 30 m/min Capacity Turning diameter: max. 406 mm Turning length: max. 520 mm Main spindle Spindle speed: 4,500 rpm Spindle power: 7.5 kW Revolver Number of tools: 12 Dimensions and weight Dimensions: L 3,415 mm x H 1,900 mm x W 1,863 mm Weight: approx. 5,560 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Master 80 HF 33 L Bar Feeder, Year 2011 Sub-spindle AGW Tool holder BMT45 Parts catcher

CNC Turning Center MAZAK QT-COMPACT 200M L.

CNC controller: FS-31IA5 (MAPPS 3) Capacity Z-axis travel mm: 1.550 + 100 Turning length mm: 1.542 Max. turning diameter mm: ø: 660 Swing over bed mm: ø: 730 Bar work capacity mm: 80 / 80 Turning diameter f. lower turret mm: 350 Distance between spindle centers mm: 1.862 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 B-axis degree: ±120° (Index 1°) C-axis degree: 360º (0,001º) Speed spindle rpm: 12.000 Drive power kW: 18,5 / 11 (30min/cont) Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool length max. mm: 400 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Milling function: PROVIDED Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22 / 18,5 (30min/cont) Spindle bore mm: 91 Counter spindle  ...

Technical data: Manufacturer: DMG MORI Model: CLX 450 V4 Year of manufacture: 2023 Control: SIEMENS Operate 4.7 on SLIMline® Multi-Touch (19\") Main spindle: A2-8, 17 / 25.5 kW, max. 4,000 rpm C-axis and Y-axis (±60 mm) 12-fold servo turret VDI 40 with 12 driven tool stations and 6 BT stations Max. bar passage: 80 mm Direct position measuring system in X and Y axes Hydraulically movable tailstock External Electronic Handwheel DMG MORI IoTconnector Special equipment: Hydraulic 3-jaw chuck SMW KNCS-N 225 with quick-change system (Ø66 mm passage) Automatic NC tailstock with programmable compression force (1.4–8.0 kN) incl. foot pedal High-pressure coolant system 12 bar with double filter system Coolant spray gun (5 bar) Mechanical oil mist separator AFS 600 (600 m³/h, filter class H13) Coolant/compressed air switchover via turret head DXF import for SIEMENS cont ...

turning diameter: 65 mm turning length: 650 mm control: TX8i-s Main Spindle:: spindle passage: 65 mm spindle turning speed - stepless: 5000 U/min drive capacity - spindle motor: 24 / 17 kW spindle bearing diameter: 110 mm Torque: 192 Nm x-travel: 175 mm z-travel: 650 mm y-travel: 80 (+/- 40) mm 2nd Spindle:: spindle passage: 65 mm spindle turning speed - stepless: 5000 U/min drive capacity - spindle motor: 24 / 17 kW spindle bearing diameter: 110 mm Torque: 192 Nm total power requirement: 85 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3.420 x 3300 x 2.258 m Main spindle: fully reconditioned in 2026 - TRAUB TX8i-s CNC control - Main and counter spindles -- 2 x Hainbuch Kombi Axfix 65 -- C-axis 0.001° - 3 tool turrets (10-position, VDI 30) -- Turret: 10-position with driven tools, 6,000 rpm, 5.5/3.7 kW - Coolant mist extraction and separation system - In-machine op ...

turning diameter: 510 mm turning length: 1000 mm control: MAZATROL T PLUS total power requirement: 22-26 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 170 mm Max. Turning length: 120 mm bar capacity: 52 mm control: FANUC MSX-501 travel -x1 axis: 140 mm travel -x2 axis: 140 mm travel -z1 axis: 450 mm travel -z2 axis: 410 mm travel -y axis: +/- 40 mm travel - b axis (spindle 2): 525 mm speeds station 1: 60 - 6000 U/min spindle bore 1: 62 mm speeds station 2: 60 - 6000 U/min spindle bore 2: 62 mm driven tools turning speeds: 6.000 U/min CNC Turning- and Milling Center | ZT 1500 Y - 2005 equipped with 2 turrets for driven tools, Y-axis and bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-Y The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

multitasking turning center, year 2001. Used machine in good condition. More info & price on IndustrialBuyer.

multitasking turning center, year 1999, CNC U100L. Used machine in good condition. More info & price on IndustrialBuyer.

multitasking turning center, year 2001, CNC 640 MT. Used machine in good condition. More info & price on IndustrialBuyer.

multitasking turning center, year 2010, CNC Mapp. Used machine in good condition. More info & price on IndustrialBuyer.

multitasking turning center, year 2002, CNC U100 - L. Used machine in good condition. More info & price on IndustrialBuyer.

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

Key data: 395 mm, 450 mm

6-axis CNC turning center Control: SIEMENS Sinumerik 828D incl. OPERATE + PPU290 Flat guides in all axes Main and sub-spindle Max. speed: 6,000 1/min 12-station turret (all driven) Speed of tools: 5,000 1/min Y-axis B-axis Travel: X= 235, Z= 580, Y= +- 52.5, W= 580 mm Bar Passage: 67 mm incl. tool package Chip conveyor

Used machine HAAS ST-30Y Year of manufacture 05/2019 Dates to follow. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

vertical CNC turning center, year 2016, CNC 32iB. Used machine in good condition. More info & price on IndustrialBuyer.

Machine Type: CNC Turning Center Model: CTXbeta500V4 Manufacturer: DMGMORI Control: Siemens 840D si Operate solutionsline Year of Make: 2014 Location: EU (#301336) Facilities • Main spindle 34/25 kw rpm 5000 • Hydraulic 3-jaw chuck 250 mm • Manual tool measuring device • 12 VDI 40 station turrets • Tool drive for all stations • C-axis • Y-axis • Scale X • Chip conveyor • 12 bar / coolant system • Coolant spray gun incl. documentation if available Technical data Turning diameter max. approx. 410 mm Turning diameter standard approx. 270 mm Rod diameter max. approx. 65 mm X-axis approx. 300 mm Z-axis approx. 550 mm Y-axis approx. +/- 60 mm Spindle speed 1 approx. 5000 rpm Speed milling pindle approx. 4,000 rpm Rapid traverse X/Y/Z approx. 30/22.5/30 m/min Power spindle 1 approx. 34/25 kW Footprint L x W x H approx. 5.3 x 3.0 x 2.1 m  ...

Machine Type: CNC Turning Center Model: CTXbeta1250 TC Manufacturer: DMGMORI Control: DMG MORI CELOS with Siemens 840D sl Operate Year of Make: 2020 Location: Germany (#301432) Facilities - Turning-milling spindle HSK-A 63 - Tool magazine 80 places - Hinge belt chip conveyor - Main spindle ISM 102 33/40kW - Sub-spindle ISM 76 25/32kW - Counter-pressure stress main spindle and sub-spindle - Milling spindle 20,000rpm - High pressure cooling 80bar - Feed rinsing device, main spindle - Tool probe, BLUM for fixed tools in the turning/milling spindle - Tool probes for workpieces - Automatic door - Oil mist extraction mechanical - Bar machining package 104 mm - Workpiece pick-up device with conveyor belt - Hydraulic hollow clamping device n max 3,600 rpm - Indicator light, 4-colour - Machine Protection (MPC) - Electrical interface standard Profibus for Robo2Go -  ...

OKK VC-X350L 5-axis continuous vertical machining center with turning function (C-axis), Fanuc 31i-A5 control. Machine from 2011 in very good condition, very well equipped, in operation. Features Brand / Model: OKK VC-X350L Serial No.: 125 (Manufacture No. MAJ15026) Year of Manufacture: 2011 CNC Control: Fanuc Series 31i-Model A5 with Data Server 5-axis continuous with TCP function Spindle: 12,000 rpm, BT 40 taper Turning function (C-axis): 1,000 rpm Coolant center high pressure 40 bar Coolant refrigeration unit Renishaw OMP60 workpiece probe Renishaw TS27R probe Tool magazine: 60 positions Power supply: 380 V / 50 Hz / 3 phases – 54 kVA, current 82 A Equipment and accessories included Set of 60 tool holders of different types Chip conveyor Fanuc data sheet and original purchase invoice provided History and condition Spindle completely ...

turning diameter: 500 mm turning length: 910 mm control: Mazatrol Smooth G axis stroke (X,Y,Z): 450/200/960 mm : 1436 mm rapid travel x/y/z: 40000 mm/min rapid travel W: 30 m/min Main spindle:: spindle turning speed range: 5000 U/min Motor output (40%ED): 11 KW capacity at 100%: 7,5 KW spindle bore: 76 mm bar material dia.: 65 mm spindle nose: A2/6 3-jaw chuck: Kitagawa BR08 milling spindle: turning speed range: 12000 U/min power capacity: 7,5 kW tool taper: Capto C6 tool change unit: numbers of positions in the tool changer: 36 max. tool diameter: 125 mm max. tool length: 210 mm max. tool weight: 5 kg 2nd Spindle:: Subspindle Power: 11 / 7,5 kW Subspindle - speed: 5000 U/min spindle bore: 61 mm spindle nose: A2/5 total power requirement: 51,1 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,8 x 2,5 x 2,5 m - CNC Control Smooth G - Main & Subspindle - ATC for 36  ...

Used machine NLX2000SY with loading magazine Machine Type: Turning Center Model No.:NLX2000SY Manufacturer: DMGMORI Control: CELOS Year of construction/IB: 2021/2022 Location:: Germany - Main spindle 15/11 KW - Chuck for main spindle - Automatic path control of the clamping cylinder for the main spindle. - Sub-spindle 11/7.5kw - Chuck for sub-spindle - Automatic path control of the clamping cylinder for the sub-spindle - Double footswitch for HSp and GSp - Coolant shower on lining - Spindle 2 tailstock specification - 20 Station turret - Milling drive for all stations 10,000 min-1 - Direct position measuring system X-Y-Z axis - Y-axis - Chip conveyors - Coolant pump 8bar - Bar feeder IF - Parts catcher conveyor belt for parts - Irco Bar Loading Magazine MUK 7012 III - Workpiece ejector (headstock 2) - Oil separator - Alternating speed - Spindle orientation ...

control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...