turning center used for sale

CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - / Contact us at -

CNC controller: Fanuc Series 18i Axes X-axis travel mm: 650 Y-axis travel mm: 500 Z-axis travel mm: 450 Rapid traverse m/min: 150-600 Feed rates m/min: 40 Rapid traverse m/min: 40 Worktable Table dimensions mm: 800x450 Maximum workpiece size (D x H) mm: 800 x 450 x 450 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 13000 Spindle drive power kW: 18/22 Spindle torque Nm: 95/117 Tool system Tool holder: ISO 40 Tool magazine slots: 20 With free neighboring places mm: 120 With occupied neighboring places mm: 114 Max. Tool Length mm: 300 Max tool weight kg: 8 Tool-to-tool time s: 1.3 Chip-to-chip time s: 4.5 Equipment High pressure pump Rated power kVA Basic machine dimensions / weight Length mm: 2315 Width mm: 2760 Height mm: 2805 Weight kg: 7300

CNC controller: BROTHER Axes X-axis travel mm: 450 Y-axis travel mm: 320 Z-axis travel mm: 410 Worktable Table dimensions mm: 550x350 Spindle Spindle speed rpm: 12000 Tool system Tool holder: BT-30 Tool magazine slots: 26

CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operatin ...

Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right

Control Siemens 840D powerline Travel X/Y/Z 630/630/630 mm 2-fold pallet changer Speed 10000 1/min Knoll coolant system with paper belt filter Tool holder: SK40 Tool magazine 80 spaces

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1300 mm y-travel: 610 mm z-travel: 650 mm control: Siemens type: 828 D Shop Mill Tool changer: 24 Fach spindle taper: ISO: 40 SK spindle turning speed range: 8500 U/min table surface area: 1300x610 mm Table load: 1000 kg spindle power: 15 kW total power requirement: . KVA weight of the machine ca.: 8 t dimensions of the machine ca.: m Operating hours: 5000 Equipment: Internal coolant system, chip conveyor on the left, cleaning gun, signal light The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

Heller MC16 Nr 31-43514 BJ. 2009 Spindle revolutions 1/min. 45-16000 Psbmlb Sswffd Ssaljrd SK40 Travel Distances mm X 630 Y 630 Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool diameter mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Dimensions pallets 400 x 500 Max. pallet load KG 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 73 ATL iTM400HP nr.14916 BJ.2009 Power kVA 30 Standard deburring chamber 400 / 400 mm Max. gas filling pressure 20 bar Siemens Multipanel with Windows CE operating system

Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.

Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8848 Type: VX 15 Producer: HURON Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Work table length: 1700 mm Work table width: 810 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1510 mm Y-axis travel: 810 mm Travel Z axis: 810 mm Cone: ISO 40 Number of all tools: 24 pieces Machine height: 4000 mm Machine length: 5400 mm Machine width: 3310 mm Machine weight: 14500 kg Equipment: Conveyor Central air cooling Washing gun Probe Blum Rulers

WORKING RANGE -CUBIC-   X-axis travel: 1270 mm   Y-axis travel: 660 mm   Z-axis travel: 635 mm SPINDLE / HEAD   spindle revolutions (max): 7500 /min BASIC FUNCTIONS   number of spindles: 1   number of turrets: 0   live positions: yes   number of c-axes: 0   number of y-axes: 1   number of b-axes: 0 ATTACHMENTS   chip conveyor: yes WORKING RANGE TURNING   swing diameter (max): 635 mm   worpiece length max.: 1372 mm   workpiece weight max.: 1814 kg MAIN SPINDLE   spindle revolutions (min): 0.001 /min   spindle revolutions (max): 7500 /min X/Z SLIDE   Z-axis travel: 635 mm   X-axis travel: 1270 mm   Y-axis travel: 660 mm TOOL MAGAZINE   tool diameter max.: 178 mm   tool length max.: 406 mm   tool weight max.: 13.6 kg

Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg

Number of tool positions: 30 Spindle power: 14 kW Spindle speed: 14,000 [rpm] A-axis travel: 360 [°] (+/-) Indexing accuracy: 0.001 [°] Stroke: -10 / +95 [°] Indexing accuracy: 0.001 [°] Tool Changer Type : Loader Arm Table load capacity : 350 [kg] Auction-ID: A7-32339-12

Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

3-axis machining centre with automatic tool changer for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed infinitely variable up to 21,000 rpm Manual control unit Minimum quantity spraying Automatic tool change with magazine (4 places plus angle head) Tensioner detection and clamp displacement 4 pneumatic material clamps light barrier Weight: approx. 2,000 kg

Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible.

Manufacturer: Heller Model: MC 16.1 Year of Manufacture : 2004 /2005 Technical Specifications Spindle - Motor spindle speed: 16,000 rpm - Tool holder: HSK 63 Setup / Clamping Area - Hydraulic clamping for fixtures - Pneumatic workpiece support control Tool System - Tool magazine capacity: 40 tools - Drill breakage detection Working Area (Axis Travel) - X-axis travel: 630 mm - Y-axis travel: 630 mm - Z-axis travel: 630 mm Coolant System - Knoll coolant system - Maximum tool coolant pressure: 30 bar Hydraulic System - System pressure: 60 bar Find more here - / Contact us at -

TBI MVC 1890 CNC vertical machining center was built in 2023 in Poland by TBI Technology Sp. z o.o. The machine has worked very little over its service life. During the last maintenance, the spindle was replaced with a new one worth €10 000. The MVC 1890 CNC machining center on offer is an excellent choice for machining heavy workpieces with a maximum weight of 2500 kg. The state-of-the-art technical solutions used in it guarantee the best precision and efficiency. These include, among others, a reliable, high-speed main spindle. Thanks to its temperature stabilisation (oil cooling), the spindle does not deform thermally and maintains a constant temperature during heavy-duty, high-speed operation. The cutting tools, on the other hand, are continuously cooled during the machining operation, which increases their overall durability. All axes are driven by efficient digital drives w ...

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.

A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.

CINCINNATI MILACRON DART 750 CNC vertical machining center was built in 1999 in the UK by Cincinnati Milacron U.K. Limited. The machine, designed for machining workpieces with a maximum weight of 455 kg, is distinguished by its outstanding precision, efficiency and reliability. The machining process is performed on a large work table with a length of 950 mm and a width of 520 mm, by means of a high-speed spindle and cutting tools taken from a 21-position magazine. High process stability, even during the most intensive challenges, is in turn ensured by an extremely rigid design made of top-quality steel. All this is completed by a CNC controller with dialogue programming. The CINCINNATI MILACRON DART 750 CNC machining center weighs approximately 3500 kg. Technical specifications of the CINCINNATI MILACRON DART 750 CNC milling machine - CNC controller: ACRAMATIC 2100 - number of axes: ...

Manufacturer: Chiron Model: DZ 12K W Year of Manufacture: 2010 - High-speed CNC machining system by Chiron - Equipped with 4th axis and integrated rotary table for high productivity - Includes Knoll chip conveyor - Includes water treatment plant Find more here - / Contact us at -

Horizontal machining center Toyoda FH550S Year of manufacture: 09/2005 Control: Fanuc Description: X-axis: 750 mm Y-axis: 800 mm Z-axis: 850 mm Pallet: 550 x 500 mm Spindle power: 21.6 kW Spindle speed: 15,000 rpm Magazine: 60 tool positions chain magazine Coolant: Knoll high-pressure system Machine time: 83,000 hours Spindle/feed time: 20,000 hours Approx. space requirement: 3000x5700x2770mm Machine weight: 16,000 kg Horizontal machining center Find more here - / Contact us at -

Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30

1 set = 3 new centring units, zero point system, Micro grip 50, Parotec, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - Comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Awea BM-850 vertical machining center Technical specifications Selca CNC Model CNC version S4040DH Tool holder iso 40 Spindle power 11 Kw Spindle Speed 12000 Number of tools 24 X-axis travel 850 mm Y-axis stroke 600 mm Z-axis travel 600 mm Fast feed rates linear axes X Y Z 24 m/min Table dimensions 1050x600 mm Table capacity 850 Kg High refrigerant pressure yes Pressure value 18 bar Screw chip conveyor Basic Information Code 33883A Level Machine Standard Brand Name: Awea Model BM-850 Year of construction 2010 Size and Weight Length 2,500 mm Width 2,200 mm Height 2,600 mm Weight 6500 Kg

Key data: 650 mm, 600 mm, 500 mm

For sale is a Hermle 5-axis machining centre type C30 U (5 simultaneous axes). Equipped with the Heidenhain i TNC 530 controller. The travels of the X, Y and Z axes are 650 x 600 x 500 mm. The table diameter is 280 mm. The machine includes various clamping pallets that can be attached to the table. The maximum speed range is between 20 and 18,000 rpm. The spindle holder is HSK-63. In addition to the standard 32-cavity tool magazine, the machine has an expansion to 157 tool positions, bringing the total number of tool positions to 197. Furthermore, the machine is equipped with a Knoll high-pressure system with a maximum pressure of 40 bar including a fine filter system. A chip conveyor with rear discharge is also available. At the front of the machine is a robotic loading system with a significant number of pallet spaces (depending on the pallet size). This system is connected to the mach ...

Inv. Num. : 8870 Type: VTC-200B Producer: MAZAK Created: 1999 Parameters: Control system: Mazatrol PC-Fusion CNC 640 M Work table length: 2820 mm Work table width: 655 mm Maximum table load (uniform): 800 kg X-axis travel: 1120 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 6000 kg Equipment: Tool probe Workpiece Probe IKZ Chip conveyor

Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul

A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible.

x-travel: 400 mm y-travel: 450 mm z-travel: 350 mm Control: Heidenhein iTNC 530 : 68 fach tool adaptor: HSK 40E turning speeds: 30.000 U/min fixed table - dimensions: 300 x 400 mm mm workpiece weight: 200 kg pallet table size: 320 x 320 mm feed speeds autom. x/y/z: 40 m/min. spindle drive motor: 13 kW Number of working hours: 32369 h total power requirement: 16 kW weight of the machine ca.: 7.500 kg Machine still in the delivery factory: Condition: ready for operation: CE signed: Electric 380 Volt: Palett changer: 7-fach Cabin: Tool magazin places number: 68 High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic  ...

WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...

FEHLMANN PICOMAX 54 CNC milling machine was built in 2010 in Switzerland by FEHLMANN AG. This is an exceptionally efficient, multi-tasking machine that is ideal for processes requiring extreme precision. The machining processes, i.e. milling, drilling and threading, are performed inside a large workspace by means of a reliable high-speed spindle. In order to achieve high feed repeatability, all axes are equipped with special measuring systems, consisting of measuring scales and encoders. The open design, in turn, ensures free access to the workpiece. All this is complemented by the easy-to-use HEIDENHAIN CNC control with many useful functions. The FEHLMANN PICOMAX 54 drilling and milling machine weighs 2150 kg. Technical specifications of the FEHLMANN PICOMAX 54 CNC machining center - number of axes: 4 (X,Y,Z,W) - feed in the X/Y/Z/W axis: 500/260/160/480 mm - feed rate in the X,Y  ...

Biesse cnc controlled nesting machining center Rover 35 XL Version 2  Electric milling spindle A Electric milling spindle B Drilling unit 28 drilling spindles  Working area 6 x 1.55 (1.65) m

cnc machining center with consoles lard  Processing field X 4500 mm Y 1550 mm Z 490 mm Gantry bridge over linear guides and racks running in X and Y max axis speeds X + Y 100 m/min Z 20 m/min

scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

General Manufacturer: Hermle Type: C 40 U Year of Make: 2005 Control: Heidenhain TNC 430 Travels: X 850 mm, Y 700 mm, Z 500 mm B swivel axis Working spindle Speed: 28,000 rpm Tool/movement Tool changer: 38-speed Tool holder: HSK63A Dimensions and weight Weight: 10,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Spindle coolers IKZ high-pressure system 80 bar Blum Laser Measurement Workpiece probes Electric Handwheel HR410 Chip conveyor Oil mist extraction

2 x poles BAZ Manufacturer: DMG Type: DMP 60s BJ: 2004 and 2003

5 axle BAZ Chiron FZ 12 KS BJ 2003 more technical data and more pictures on request,

5 Axle BAZ DMG DMU 50 evo BJ 2000 more technical data and more pictures on request

Inv. Num. : 8880 Type: MCV 500 QUICK Producer: MAS Created: 2003 Parameters: Control System: FANUC Series 2ti-MB Work table length: 800 mm Work table width: 500 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2550 mm Machine length: 2085 mm Machine width: 1900 mm Machine weight: 3800 kg

Inv. Num. : 8881 Type: PRO-1000 A Producer: Hartford Generated: Parameters: Control system: FANUC Work table length: 1150 mm Work table width: 600 mm Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Machine weight: 6000 kg Equipment: Tools

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 10,500 mm Y-axis travel: 1100 mm Travel Z-axis: 655 mm B-axis swivel angle: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Barcode scanners and label printers Metal chip conveyor Angle head for machining from below Suction for cabin Pendulum operation through two light barrier areas Manual control panel Spindle hours: approx. 7500 Loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg