136,899 used machines on RESALE, but how to find them? Machine Search
Key data: 26 mm
5 CNC lathes machines for sale ONLY in PACKAGE : 1. CNC sliding head lathes, 3 pieces Make : Traub Type : TNL 26 Year of construction : 2011 / 2008 / 2006 Hours : 64.154 / 75.849 / 81.823 Control : Mitsubishi TX 8i Equipment : - Main spindle - Sub-spindle - Turret top - driven + Y axis - Turret lower - driven + Y axis - Front apparatus - driven + Y axis - Residual apparatus - Bar feeder 2x FMB / 1x Breuning The machines come from ongoing production. 2. CNC lathe, 2 pieces, one defective Make : EMCO Type : Turn 332 MC Year of construction : 2010 / 2008 Operating hours : unknown Control : Siemens Sinumerik 840D Equipment : - Main spindle - Sub-spindle - Revolver top - Revolver underneath - Bar feeder TOP ETL 8-45 One machine is from ongoing production, one has already served as a spare parts carrier, and several components have been ...
CNC Swiss Automatic Lathe with Bar Loading Magazine Stamag FMB Turbo 5-42 TX8i control system with Traub tool monitoring Main spindle: - C-axis with driven tools - Holder for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bush Sub-spindle: - Counter spindle as motor spindle with hollow clamping and locking device with Z4 carriage - C-axis - Tool carrier lower X1 / Y1 - Axes - 12 tool holders driven - Tool carrier top X2 / Z2 - Axes - 12 tool holders, driven - X3 - Transverse axis for front apparatus / sub-spindle - Front apparatus 5-way with Z3 carriage without tool drive - Tapping side processing station (5 tools) with axis X4 / Y4 without Tool drive - Hinged belt conveyor - Coolant equipment for externally and internally cooled tools, 20 l/min - 30 bar - Equipment for deep hole drilling with comp ...
The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.
turning diameter: 590 mm turning length: 1100 mm control: Fanuc turning diameter over bed: 800 mm total power requirement: --- kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 600 mm turning length: 1.045 mm control: MSX - 711 III MAPPS III swing diameter over support: 600 mm distance between spindles: 1.255 mm max. bar capacity: 65 mm Main drive 2: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 25 / 22 kW no. of turning speeds: 2 spindle nose: JIS A2-6 spindle bore: 73 mm internal diameter: 120 mm C-Axis: 0,0001 ° chucking diameter: 200 mm Milling Spindle:: Speed range Tool Spindle: max. 12.000 min/-1 Power rating Tool Spindle: 5,5 / 3,7 kW tool taper: Capto C5 internal diameter: 65 mm B - Axis: 0,0001 ° swivellable: +/- 120 ° axis stroke:: x-axis: 685 (610 + 75) mm y-axis: +/- 125 mm z-axis: 1.075 + 130 mm turret:: number of toolpositions: 12 pos. Shank height for square tool: 20 mm Drill shank diameter: max. 32 mm tool magazin:: tools in tool magazin: 40 pos. max. tool diameter: 70 mm max. tool ...
Key data: 600 mm, 2000 mm
Weisser Heilbronn HEKTOR - Cycle CNC lathe - Bosch CC220 controller (in need of repair) - incl. tools & accessories - incl. operating instructions & technical documents - Built in 1992 Technical data: - Center width: 2000 mm - Tip height: 300 mm - Turning diameter over bed: 600 mm - Spindle bore Ø: 80 mm - Quill holder: MK5 - Bed width: 430 mm - Operating voltage: 400 V - Dimensions WxHxD: approx. 4700 x 2300 x 2100 mm - Weight: approx. 8000 kg
Shank size 8x8 mm, 11-piece set, equipped with ground carbide inserts, packaged in a practical aluminum case. Auction-ID: A7-50066-87
Shank size 8x8 mm, 11-piece set, equipped with ground carbide inserts, packaged in a practical aluminum case. Auction-ID: A7-50066-187
Shank size 8x8 mm, 11-piece set, equipped with ground carbide inserts, packaged in a practical aluminum case. Auction-ID: A7-50066-287
turning diameter: max. 356 mm turning length: 1.255 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm distance between spindles: 1.511 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 91 mm max. bar capacity: 80 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm axis stroke:: x-travel: 260 mm z-travel: 1.345 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 5,5 / 3,7 kW total power requirement: 50 kVA ...
turning speeds: 0 - 8.000 U/min hollow: 20 mm control: FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi Ø over saddle: Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T
The machine is in good technical condition; it can be tested by prior arrangement.
The machine is in good technical condition; testing is possible by prior arrangement. Sinumerik 840 SL control system, turret with live tooling, chip conveyor.
The machine is in good technical condition; it can be tested by prior arrangement.
The machine is equipped with a tailstock as well as three-jaw chuck, jaw width: 380 mm, furthermore a large batch of tool holders, clamping jaws and another jaw chuck, incl. Chip conveyor. Additional technical specifications: • frequency: 50/60 Hz • nominal voltage: 52 A
CNC Turning and Milling Center DMG CTX GAMMA 2000 TC (spindle hours may increase slightly). The machine is equipped with an automatic steady rest from SMW AUTOBLOK, a three-jaw chuck (manufacturer SMW, diameter: 300 mm), additional clamping jaws, another jaw chuck, as well as a chip conveyor and coolant system. Transport warning: Caution: the machine can be transported on a truck up to 3000 mm wide. Additional technical specifications: • Spindle distance: 2260 mm • max. workpiece weight chuck parts/chuck weight: 250/150 kg • max. workpiece center of gravity from spindle flange: 250 mm • Travel path Z2: 1910 mm • Travel path Z3: 1910 mm • Steady rest clamping range DW: 45 - 310 mm • Steady rest width C: 145 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm
The machine is equipped with a tailstock, a 12-station tool turret as well as a collet chuck, incl. chip conveyor
The machine is equipped with a tailstock, a three-jaw chuck, a chip conveyor, and a coolant system. Attention: spindle hours may increase slightly! Additional technical specifications: • Nominal voltage: 125 A • Spindle distance: 1020 mm • Max. workpiece weight chuck parts/chuck weight: 100 kg • Max. workpiece center of gravity from spindle flange: 120 mm • Travel X1: from -10 to 490 mm • Travel Y1: +-100 mm • Travel Z2: 600 mm • Travel Z3: 800 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm • Slide rapid traverse speed Z-axis: 40 m/min • Path resolution Z-axis: 0,001 mmm • B-axis max. swivel speed: 70 rpm • Angular resolution: 0,001° • Quill force: 8 kN
The machine is equipped with a tailstock, a 12-station tool turret as well as a 3-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, incl. chip conveyor
The machine is equipped with a sub-spindle (equipped with a 3-jaw chuck SMW AUTOBLOK, diameter: 210 mm) as well as a 12-station tool turret, incl. driven tool stations, as well as an SMW AUTOBLOK 3-jaw chuck, diameter: 250 mm, plus chip conveyor, filter extraction, documentation and CDs. Additional technical specifications: • Bed inclination: 45° • Bed diameter: 700 mm • max. slide diameter V1 to V3: 500 mm • in the front workpiece diameter: 320 mm • centre length: 1450 mm • Travel Z3-axis: 1200 mm • Spindle height axis to floor: 1043 mm • Drawbar diameter: 81 mm • Front bearing diameter: 130 mm • Resolution axis C1: 0.001° • max. weight between centers: 500 kg • Distance between two spindle noses: 1495 mm • Z1 axis travel: 1200 mm • max. workpiece length: 1140 mm • max. workpiece diameter: 450 mm • Bar capacity of sub-spindle: 50 mm • Bore diameter o ...
The machine is equipped with a tailstock, revolving steady rest, a 14-position tool turret, incl. the tool holders visible in the photos in the turret, as well as a three-jaw chuck from the manufacturer SMW, diameter: 315 mm and incl. an additional steady rest as well as chip conveyor Additional technical specifications: • nominal current: 207 A • control voltage: 220 V
The machine is equipped with a tailstock and a 12-station tool turret, incl. the tool holders located in the changer, plus a 3-jaw chuck SMW AUTOBLOK, diameter: 300 mm, incl. chip conveyor and filter extraction system as well as documentation. Additional technical specifications: • frequency: 50/60 Hz • Diameter in the front bearing: 140 mm • Feed drive in X and Z-axis: 40 x 10 mm • Feed forces X/Z: 7.5 kN • Y-axis feed force: 7000 N • rapid traverse of C1-axis: 100 m/min • Position measuring system X/Y/Z: absolute rotating • Positioning uncertainty X: 0.008 mm • Positioning uncertainty Z: 0.010 mm • Working area axis distance: 1150 mm • Swivel range over X slide: 465 mm • Swivel range over bed: max. 680 mm
Additional technical specifications: • Center distance over bed: 120 mm • Center distance over support: 60 mm
Additional technical specifications: • Center height over support: 80 mm • Center height over bed: 150 mm • Center Length: 450 mm
• nominal voltage: 80 A • spindle internal diameter: 85 mm • incl. chip conveyor
HARDINGE COBRA 42 ist eine CNC Drehmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Kapazitäten: Dreh-Ø über Bett 210 mm, Stangen-Ø 42 mm, Drehlänge/Z 355,6 mm, X 196,8 mm; Revolver 1×12, Camlock A2-5. Daten: 100–5000 t/min; Eilgang X=10 Z=16 m/min; Spindel 14 kW; 50 Hz 3×400 V; 24 kVA. Zubehör: 3-Backenfutter, Spannzangensatz, Stahlhalter. Für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhren, Maschinenbau. Technische Daten ohne Gewähr
WFL M 35 G MILLTURN ist ein CNC Dreh-Fräs-Bohrcenter hoher Präzision, Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenweite 2000 mm, Dreh-Ø max 520 mm, Spindelbohrung 77 mm; Verfahrwege Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Technische Daten: Hauptspindeln bis 4000 min-1, 29/33 kW (551/630 Nm), angetriebene Werkzeuge 6/13 kW, Frässpindel 9000 min-1 15/20 kW (165 Nm); Eilgänge Z 40 m/min X 30/10 m/min; Gewicht ~20000 kg; Abmessungen 7900×5700×3250 mm. Ausstattung: Lampe, Kühleinrichtung, Papierfilter, Ölnebelabsaugung, Späneförderer, automatische Be-/Entladung, Messsystem Renishaw. Für enge Toleranzen, Anwendungen in Automotive, Luftfahrt, Medizintechnik, Uhrenfertigung und Maschinenbau. Technische Daten ohne Gewähr
Shaft 10/12 mm; with Widia insert; Contents of 4 drawers Auction-ID: A1-49785-297
Includes insert milling; unused and in original packaging Auction-ID: A1-49785-318
Shaft 20/25 mm; unused and in original packaging Auction-ID: A1-49785-295
For ISO turntables; unused and in original packaging Auction-ID: A1-49785-215
For ISO turntables, including CNMG12/ VBMT16; various slot, parting holders; approximately 45 pieces in total Auction-ID: A1-49785-95
Internal and external; unused and in original packaging Auction-ID: A1-49785-130
For internal, external; including VBMT11 and VCMT16; unused and in original packaging Auction-ID: A1-49785-185
For ISO turntables; unused and in original packaging Auction-ID: A1-49785-174
4 pieces PCLNL3225P12T for CNM61204/ 5 pieces PCLNL2525M16T for CNMG61606; unused and in original packaging; Including matching inserts Auction-ID: A1-49785-251
Shaft 32 mm; including with direct cooling; Includes 20 matching inserts CNM1906 Auction-ID: A1-49785-213
For insert VCMT16/ DNM11, and so on; unused and in original packaging Auction-ID: A1-49785-245
Shaft 20 to 40 mm; for ISO turntables; approx. 32 pieces Auction-ID: A1-49785-283
Includes 100 Ceratizit matching SNMM1906 type inserts Auction-ID: A1-49785-207
11 pieces with shaft 25 mm; 9 pieces with shaft 32 mm; for ISO turntables; unused and in original packaging Auction-ID: A1-49785-182
Includes holders; unused and in original packaging Auction-ID: A1-49785-332
Equipped with widia point; mainly shaft 20/25 mm; lying in 7 drawers Auction-ID: A1-49785-278
Reference DDJNL2525M15; for insert DNM15; unused and in original packaging Auction-ID: A1-49785-133
Mainly shaft 25/32 mm; for ISO turntables Auction-ID: A1-49785-286
Shaft 20 to 40 mm; for ISO turntables; approximately 34 pieces; Includes Lista insertion trays Auction-ID: A1-49785-282
Including matching inserts; in 2 cardboard boxes Auction-ID: A1-49785-250
maximum number of results exceeded
please refine your search
29 € 
