tur 50 2000 used for sale

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

Mobile u scales for fine weighing Model UV 2000 Weighing capacity 2000 kg Accuracy in +/-2 kg Number of sensors 4 pcs. Height 120 mm Weight 38 kg Made in Denmark

CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition

Tablet press Fette P2000 Tablet output: 250.700/h mechanical speed Number of station: 43 stations Tablet diameter max: 13 mm Compression force max: 80 kN Initial compression force: 20 kN Type of tool : EU Norm BB Height of the machine with filling hopper : 1950 mm Project floor area : 1212 x 1126 Weight: 2200 Kg Year of manufacture :1993

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

20,000 liters tank with thermal insulation not used tanks

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.

2pcs 3500 x 2000 x 350 mm

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

4-way push-mast forklift Manufacturer: BT Model: FRT 2000/4 Built: 1984 Capacity: 2000 kg Triplex mast Lifting height: 5400 mm Battery Voltage: 24V Charger Weight device Side driving possible Fork extension Condition: used, but fully functional

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm

Key data: 1600 KW, 2000 kVA, 400 V

ENGINE: 4016TAG2A FREQUENCY (HZ): 50 POWER: 2000kVA / 1600(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 17274kg DIMENSIONS L/W/HEIGHT (MM): 750022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or i ...

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...

Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP

Stop and stirrer Rego SM 2000 M

new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available

We offer a Noe Top 2000 wall formwork in an immediately ready for use condition. The elements are largely galvanized and covered with plastic formwork lining. Price without accessories 99,00€/m² Pcs. Designation 60 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 4 panels 250 x 3310 2 panels 400 x 3310 10 panels 450 x 3310 12 panels 490 x 3310 20 panels 500 x 3310 11 panels 550 x 3310 3 panels 610 x 3310 2 panels 750 x 3310 8 panels 1000 x 3310 8 panels 1250 x 3310 9 panels 1320 x 3310 15 IU 3310 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction ma ...

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

Manufacturer: Frenostat 2000 , Model: 32320000, Serial number: 90042,

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Manufacturer: Frenostat 2000, Type: Bremsgeraät, Model: 32320000, Serial number: 165944,

Manufacturer: Frenostat 2000 , Model: 3232000, Serial number: 111443,

Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: CEFLA, Type: TB 2000, Year: 2015, Control: yes, Working length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Total hight mm: 900, Engine power kW: 0,8, Feeding speed min-max m/min: 20, Required space L x W x H mm: 2000x1300x900, Weight approx. kg: ca. 300, Year :2015

Manufacturer: Cefla, Type: TR 2000, Year: 2015, incl.control: yes, Length-width mm: 20000x1300, Programming possible: yes, Length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Gottschild, Type: BSD 2000, Year: 2004, Control: Siemens, Monting of the machine: 5 Tellerbürsten, Number of units: 5, Working widht mm: 650, Through running hight max mm: 40, Diameter of brushes: ca.300, Cross-brushing unit: yes, Fast exchange device: yes, Through running hight max mm: 40, kW output motor: ca.1,5, Vacuum belt: yes, Feeding speed continous adjustable: yes, Year :2004

Manufacturer: SR, Type: TM 2000, Year: ca.2000, Lifting power kg: 1000, Length mm: 1500, Width mm: 540 Gabel aussen, Lifting hight approx. mm: ca.150, FREE TEXT: Preis 120 Euro.zzgl.Mwst, Year :ca.2000

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

Technical characteristics: Rated power: 2000 kVA Primary voltage (HV): 20,000 V Secondary voltage (LV): 400 V Adjustment positions: 1: 21,000 V 2: 20,600 V 3: 20,000 V 4: 19,400 V 5: 19,000 V Frequency: 50 Hz Phases: 3Isolation level: HV: 125 kV / AC 10 LV: AC 10 Cooling: KNAN Service Plan: Ongoing Connections: Connection diagram: Dyn11yn11 Output voltage: 400 V – 50 Hz Multiple Connection (Low Voltage): 1W, 1V, 1U / 2W, 2V, 2U Short-circuit current: 5.83 kA Short-circuit impedance: 6.1% Cooling & dielectric: Dielectric Fluid Type: MIDEL 7131 No-load loss rate: 1873.1 W Load Drop Rate: 15.1 kW Location :p aris Condition: Very good condition – Tested and ready-to-use hardware Disassembly and transport possible on request

Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Swash-up machine Material : Stainless steel --> 3-deck machine, screening in 4 fractions.