tur 50 2000 used for sale

Industrial washing machine for small parts Turbex Binitron 2000, machine no. 94252, 400V 50Hz 25A, see also pictures

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

General SKU247S159 MakeLipp Mischtechnik GmbH (D) LocationBarneveld CEcheck TypeIMR-E 2000 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2090 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2090 ltr. Trough sizesdia. 1100x2200mm InletDN200 Inspection hatchdoor dia. 1100mm OutletDN200 Max. temperature-40/120°C Motor55 kW400/690 Volt (Ex) Speed mixing shaft50 rpm With lump breaker(3x) Motor15 kW 400/690 Volt (Ex) (3x) Speed lumpbreaker965 rpm MaterialStainless steel 1.4571 (316Ti) Information No.4920 Year of construction2011 Mounted on framecheck Floorspace2,5x4,7 M Total height2,3 M Weight7500 Kg ATEX compatiblecheck Extra Specificationsshaft seals by means of a flushed seal (Eagle Burgmann) including filter and product dosing vessel with agitator SpicesPowder tu ...

General SKU205P135 MakeMorton Machine, Motherwell Scotland No.22628 Year of construction1979 Mounted on framecheck Pressure Working pressure jacket1.7 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizes2950 x 950 mm InletDia.300 mm Top connections(2x)Dia.80 mm Inspection hatch600 x 460 mm en inlaat Outlet300 x 250 mm With jacketcheck With adjustable packing glandscheck Motor55 KW, 415 Volt (ex) Speed mixing shaft+/- 75 Rpm MaterialStainless steel Information LocationBarneveld Floorspace4900 x 2500 mm Total height1600 mm Weight3300kg ATEX compatiblecheck Extra Specificationsvessel provided with 4 connections for lumpbreakersSpicesPowder turbo mixersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feed ...

General SKUR0231 MakeDraiswerke GmbH Mannheim (D) TypeT-2000 SM LocationBarneveld Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizesdia 1200x1950mm Inlet1090x900mm Top connectionsdia 80mm (1x) Inspection hatch550x400mm Outletdia. 300mm With jacket(150 ltr) Max. temperature165 degr. C With adjustable packing glandscheck Glands air purgedcheck Motor16 / 24 kW 380 Volt Ex MaterialStainless steel 1.4541 (321) Information No.51989 Year of construction1985 Floorspace4,4x1,6 M Total height1,5 M Weight5000 Kg Extra Specificationsincluding Bucher filter. filter housing material 1.4301 including 2 filter cartridges (20 filter bags 450x1100 mm) and transport trolley to disassemble the filter cartridges, filter housing size  ...

This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine.

Long reach - flail mower for rear three point attachment, cutter head 125 cm with hammers (380 g) and bottom roller. Bowden cable control, own hydraulic system, drive via PTO 540 RPM. Range horizontal 507 cm from tractor centerline, vertically to 500 cm, tractor weight minimum 2100 kg; min. 37 kw/50 hp required (factory specifications). Other smaller long-reach flail mowers and mower technology on stock!

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

drum diameter: 382 mm drum height: 250 mm filling amount: 40 kg wall thickness of drum: 13 mm drum revolutions: 2850 U/min Capacity: 800 l/h voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1,90 x 0,70 x 1,65 m Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5.144,65 h - Timer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1997 Chuck size: 370 mm Center height: 300 mm Maximum turning length: 5000 mm Bed length: 6250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 8000 mm x 2000 mm x 1500 mm H Our internal ref. 787

General SKU011Y102 MakeMirodur SpA. Aprilia TypeTurbomill 50HP No.128 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor37 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillImmersion mill (1x) Capacitybasket 10 Ltr, Basket dia. 430mm Motorhydraulic drive unit 37,0 KW, 380/660 Volt Information With switchgearcheck Floorspacemill 2,4x0,8 M Total heightmill 2,7 M Extra Specifications- Dim. hydraulic unit: 2,3x0,8x1,3 Mtr (LxWxH) - Shaft length ± 1150mm (incl. basket) - Distance between shaft and frame ± 700mm Sand millsDiscountMirodur SpaMills > Sand millsDiscountBrand > Mirodur Spa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC

Lathe - cycle VOJUS Turntec controlled 63 bearing no 1105-02244 make VOJUS type Turntec 63 built in 1999 State second-hand machine control CNC SIEMENS 840 D storage France origin SK delivery immediately cargo base EX WORK technical details turning diameter 630 mm turning length 3000 mm control SIEMENS 840 D spindle bore 110 mm spindle speeds infinitely 2500 revs/min rapid traverse - longitudinal/plan 10/5 m / min dimensions L W H 3000 x 1800 x 1790 mm turning diameter over support 420 mm overall power demand 26 kW machine weight approx. 4,5 t description CNC - control SIEMENS 840 D SHOP TURN MULTI FIXED HOLDER 1 open, revolving bezel TURNING DIAMETER OVER SLIDE 420 MM BED 6300 TURNING LENGTH 3000 MM 2500 U/MIN

Francis turbine, used 40 kW, 3 m³, height 2m Speed 106 / 375 RPM 69 HP, built in 1963 Generator Schorch GmbH Type KT 7315 s FB01 Z-Z 50 Hz, 512U/min 55kW

Kaplan turbine used 50 kW, 3 m³, height 2m Speed 150 / 460 RPM 70 HP, built in 1963 Generator Schorch GmbH Type KT7280S - DB05 Z-Z 50 Hz, 770 RPM 55kW

ALSO USED ON VORRAT

; ready for operation

Control electronics for turbomolecular pumps (Turbotronik) (e.g. for Turbovac 361) Manufacturer: Leybold Type : NT 20 Status: over-prun & functional Delivery time: ex stock (intermediate sale reserved; ready for use

Element welding Turntable werkstueck drehvorrichtung

Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO

Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

Leybold Turbovac TMP 600C with CF DN160 inlet flange.

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS program ...

Lathe Emco turn 365 tcmy , energized Year of Make: 2003 Operating hours: only 4893.3 h Condition: Very good Technical details • Control: Siemens Sinumerik 810 D • X-axis travel: 210 mm • Z-axis travel: 610 mm, programmable tailstock • Y-axis travel: +- 40mm • Circumferential diameter over face slide: 360 mm • Spindle size: 65 mm diameter/passage • Tool carrier: 12-cavity tool turret • Tool holder: VDI 30 • Powered stations: 12 • Speed range driven tools: 0 – 4,000 rpm • Rapid traverse X/Z axis: 24 m/min • Feed force X/Z axis: 5,000–7,000 Nm • Contact force: 8,000 Nm • Workpiece size with tailstock: 200 × 520 mm diameter Machine Details • Dimensions: 4.0 x 2.5 x 2.5 m • Weight: 6 t • Operating voltage: 400 V • Frequency: 50–60 Hz • Rated current: 29 A Equipment: Oil cooler Parts catcher Accessories: Power chu ...

HHI-BBC Turbine Housing RPM - 17400 Only the turbine hull.

Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programm ...

MAZAK Mega Turn 900 CNC Vertical Lathe TECHNICAL FEATURES: Year: 2018 NC Type: MAZATROL SmoothG Maximum diameter Machinable: 920 [mm] Maximum diameter Turning time: 1000 [mm] X-axis travel: 470 [mm] Z-axis travel: 876 [mm] X-axis fast feed speed: 24000 [mm/min] Y-axis fast feed speed: 24000 [mm/min] Spindle Nose: A2-15 Maximum speed Spindle: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Maximum distance between spindle nose and turret face: 1030 [mm] Maximum weight machinable (including mandrel): 3000 [Kg] Minimum distance. between spindle nose and turret face: 154 [mm] Number of turret stations: 12 Turret Index Time: 0.4 [s/pos] Irrigation tray capacity: 516 [l] Installed power : 58.9 [kVA] Rated Current: 109 [A] Supply voltage: 400 [V] Working time: 2472 [h] Number of cutting hours: 2297 [h] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 1300 ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Control Siemens 828D - ShopTurn Rotary diameter. [mm] 500 Turning length [mm] 520 Main spindle: Belt spindle technology Speed 5,000 rpm Power (max.) 22 kW Torque (max.) 305 Nm Bar passage 65 mm Workpiece clamping 3-jaw chuck, SMW Autoblok 210 BB Tool carrier (X/Y/Z): Technology Turret with 12 stations Tool holder VDI 30 Tool drive 5,000 rpm, 5 kW, 20 Nm Travel in X/Y/Z 260/80/610 mm Rapid traverse in X/Y/Z 30/15/30 m/min Tailstock: Technology Hydraulically driven Contact force (max.) 8,000 N Stroke 500 mm Cone MK4 Equipment/accessories: Chip management chip tray Coolant management IKZ pump with high pressure, 14 bar Raw material feed interface bar feeder prepared Precast Removal Parts Catcher with Conveyor Belt Tool holder Div. gebr. rigid and driven holders Other equipment Rinsing gun

Technical data approx.: - Largest turning diameter - over bed 560 mm - via flat slide 315 mm - Center width 1500 mm - Traverse transverse slide approx. 300 mm - Spindle bore 80 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 150 mm - Spindle speeds 1 - 2500 rpm - Rapid traverses X / Y -with: - NC – FANUC control - 2 E. handwheels for manual turning -Tailstock - Coolant device - Drive 400 V / 7.5 kW - Space requirement approx. W 3250 x H 1750 x D 1500 mm - Weight approx. 3800 kg

Key data: 360 mm, 497 mm, 4000 1/min

CNC Lathe MAZAK QT SMART 250 ML (500U) Year of construction 07-2015 Mazatrol Smart Control Travel X/Z: 225 mm/605 mm. Max. turning diameter 360 mm Max. swing diameter 660 mm Max. turning length 497 mm Max. bar passage 80 mm Spindle motor AC18.5 kW Max. spindle speed 4,000 rpm 12-speed tool turret 12 driven tool stations AC 5.5 kW Driven tools max. speed 4,500 rpm Toolsetter Automatic Parts Catcher Tailstock High Pressure Pump Interface for bar feeder Conveyor CE mark

Key data: 350 mm, 500 mm

Stock number: 3920 CNC LATHE Manufacturer: Mazak , Type: Quick Turn Smart 200 Year of Make: 2012 Specifications: Max. circumferential diameter 350 mm dia. Max. turn. About Bed 660 mm Dia. Turning length 500 mm Main motor power 15 kw Spindle bore 65 mm dia. X axis movement 195 mm Z ash movement 560 mm Tool turret with 12 stations Controlled in 2 Axes Accessories: Hydraulic Main Centering Chuck 200 mm dia. Various tool holders. Cooling water system. Hydraulic tailstock. Length: 2700mm, Height: , Width: 1680mm, Weight: 4410 kg

MAZAK Quick Turn 15, built in 1989 fully functional with immediate effect.

Turbo Systems LTD mobile dosing machine, type: UPG110512, machine number: D150P5709666, year of construction: 2011, tub dimensions: Ø 570 mm x 430 mm, total dimensions: 1200 mm x 940 mm x 1725 mm.

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

2x Tapping back-pressure turbine with spur gearbox and generator Nr1: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 3800 kW Speed: l0000 rpm Steam inlet pressure max. : 37 Steam inlet temperature max. 44 degrees Tapping pressure max. : 24 Tapping temperature : 390 degrees Evaporation pressure : 2 Normal absorption capacity : 27 t/h Maximum absorption capacity : 32 t/h Gearbox Make Voith, St.Pölten Type D 64 Rated power: 5,700 HP Speed 10 OOO/1 5oo rpm Backpressure steam turbine + gearbox + synchronous generator incl. auxiliaries Nr2: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 43oo kW Speed: 9900 rpm Steam inlet pressure max. 24 atü Steam inlet temperature max. 42o 00 Exhaust steam pressure 2 ata Normal absorption capacity 35 t/h Maximum absorption capacity 35.7 t/h Gearbox Make BHS  ...

Turret Handler Ismeca Semiconductor NX16 Specifications: Supplier name: Ismeca Malaysia Construction year: 2011 Accessories: AssLabeling Laser A000 966 Find more here - / Contact us at -

Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design ("action wheel"). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 ´bara at turbine flange Live steam temperature: 191.6 ´C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided sh ...

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

Manufacturer: Ansaldo Year of Manufacture: 1999 Technical Data Listing Generator - Type: Three-phase synchronous generator GSCR 800Y4 - Power: 7,250 KVA - Voltage: 10,500V - Frequency: 50 Hz - Phase Number: 3 - Number of Poles: 4 - Rated Current: 398.8A - Power Factor: 0.80 - Rated Speed: 1,500 rpm - Spin Speed: 1,800 rpm - Insulation Heat Resistance Class: F - Ambient Temperature: 40°C - Moment of Inertia of the Rotor: 118.75 kgm² - Winding Connection: Star - Excitation Voltage Rating: 41.2/158.3V - Rated Excitation Current: 54.2/152.3A - Operation Mode: Continuous - Protection Class: IP 4 - Cooling Water Quantity: 660 l/min - Cooling Water Inlet Temperature: 40°C - Cooling Water Inlet Pressure: 4 bar - Air Inlet Temperature: 45°C - Bearing Type: Rolling bearing - Bearing A-side: EMZLB18-200 - Bearing B-side: EMZLQ18-200 - Min. Clearance Shaft/Bearing: 0.267mm - Max. Clearance S ...

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart

MAZAK QUICK TURN NEXUS 100MS CNC lathe was built in 2005 in Japan by YAMAZAKI MAZAK CORP. The machine, designed for precision machining of workpieces with a maximum diameter of 280 mm, is distinguished by the use of reliable components with excellent technical parameters, such as two spindles (main spindle and sub-spindle) and a 12-position turret. The machining process is performed inside a large, fully illuminated workspace by means of a powerful spindle with an integrated motor design that minimises vibrations at high speeds. This is all complemented by an intelligent CNC control that simplifies daily work by allowing even the most advanced machining programmes to be created in just a few steps. The MAZAK QTN-100MS CNC turning center weighs 4100 kg. Technical specifications of the MAZAK QUICK TURN NEXUS 100MS metal lathe - CNC control: MAZATROL 640T NEXUS - maximum turning diamet ...