137,958 used machines on RESALE, but how to find them? Machine Search
- Volkswagen Polo Variant 1.9 SDI Diesel - Registration date: 02/2000 - Mileage: approx. 214,058 km - 1.9-liter SDI diesel engine - Manual transmission - Trailer hitch available - Vehicle not roadworthy - Engine runs and turns - Air conditioning not functional - General condition badly used, unkempt and in need of repair - Vehicle heavily soiled on the outside - Body with numerous signs of wear due to age and use - Various scratches, paint damage, abrasions and damage present - Bumper clearly scratched and damaged - Corrosion and rust build-up present in various areas of the vehicle - Engine compartment heavily soiled and with traces of corrosion - Interior heavily soiled and unkempt - Seats and upholstery with clear signs of dirt and wear - Footwell and floor mats heavily soiled - Dashboard, door panels and center console with clear signs of wear - In the area of the cente ...
Has N2 Nitrogen been in; Test pressure 16.5 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-196
Extra options : LED lighting , Blue spot , joy stick Auction-ID: A1-40407-4
Unused in the original packaging Compact and reliable inverter unit from JCB Continuous power of 1800 watts Maximum power of 2000 watts Suitable for construction, automotive and professional use Ideal for garages, workshops and mobile service Suitable for sensitive electronic equipment Reliable pull start 5.5 litre fuel tank Run time up to 8.5 hours at 50% load Clear and uncluttered LCD display European 230V socket 12V DC output USB-A and USB-C connection Suitable as a compact emergency power generator Low net weight of only 16 kg Compact and easy to transport Auction-ID: A1-40407-77
PVC cover 420 grams; rope to pull both ways; gate height 3.5M; Gate width 3.5M; door on the side Width x height 0.8x2M; Single truss system galvanized; Oval arch 60x1.8mm; arch space 2M; unused; in metal box; Please note tent is completely white; Auction-ID: A1-51256-34
Viewing by appointment Extra options: All-round lighting, fingertip control, blue spot, beacon Auction-ID: A1-40407-8
Tank capacity is 2000 liters; Lot is sold up to 1st flange coupling; equipped with lifting eyes Auction-ID: A1-50864-79
Hydraulic pump dimensions 1000x700x1450mm, hour position 190 hours. v.v. an additional reducer: Stiebel GmbH, 45,000Nm of 682 kg, bj. 2018. Please note! This lot is part of a combination lot. Namely lot 21. Auction-ID: A1-51255-1
Ilapak flowpacker, type: Delta 2000 LDR DX, serial number: D.260.03.041, year of construction: 03.2008, 400 V, 50/60 Hz, 5000 W, infeed chain conveyor, width: 180 mm, distance between dividers: 300 mm, divider height: 50 mm, belt width: 280 mm, seal width: 360 mm, total dimensions: 7000 mm x 1500 mm x 1900 mm.
Karpowicz cooled vacuum tumbler, model: MK-2000C, serial number: 5252, volume tumbler: 2000 liter, ZTP TEPRO vacuum pump, type pump: AT 40 A, serial number: 1293, year of construction: 2015, capacity: 38 m³/h, dimensions tumbler: 3500 mm x 1650 mm x 2050 mm, dimensions cooling unit: 970 mm x 580 mm x 940 mm.
for injection molding installation or for extruse still filled with CD polycarbonate Auction-ID: A1-50707-47
Mobile Plastering Machine 80 liters capacity Auction-ID: A1-50663-1540
Manufacturer: RIPPERT Anlagentechnik Type: RTS 3000 Year of Make: 2000 Order no.: 2000/058 Exhaust air volume: 10,800 m³/h Design as an extraction/spray wall for painting and coating work Large-area filter wall with multi-stage filter elements Integrated workplace lighting Extraction via upper exhaust connection Suitable for capturing and filtering paint mist and airborne particles in the work area Stationary industrial version CE marking available Auction-ID: A1-50373-80211
steel case; including car security system Bearlock; Auction-ID: A1-50707-287
Equipped with \"Maruzen\" drive unit with petrol engine Auction-ID: A1-50889-5
No papers Won't start, battery flat due to standstill abs cbs tcs Front bend damper still ok front brake discs OK Engine block put away while running Auction-ID: A3-46103-11334
Mannesmann Dematic AG electric chain hoist, model DKUN 2-250 K V1 F4, with lifting components and accessories in the basket. Year: 2000 Load capacity: 250 kg with 1/1 gearbox – 500 kg with 2/1 gearbox FEM: 2m Indicated hook travel: 4 m Lifting speed: 8/2 m/min Power supply: 380–400 V, three-phase, 50 Hz Motor power: 0.40 / 0.10 kW Protection: IP55 Insulation class: F Chain: 4.2 × 12.2 mm Auction-ID: A7-51362-71
Arm: approx. 6.30 m long. Auction-ID: A1-51321-4
Volvo FL6 Intercooler 4x2 equipped with a Multilift container carrier system. First put on service on 20/04/2000. 5,480 cc diesel engine developing 154 kW. GVW 11,000 kg. Curb weight 6,285 kg. Payload 4,640 kg. Mileage displayed: 331,554 km. Vehicle sold with one container mounted and 3 ADDITIONAL CONTAINERS. Numerous recent maintenance invoices. Certificate of conformity, registration certificate and identification report available. Auction-ID: A3-46109-37051
Car has Dutch license plate, export can be arranged by us with insurance complete 250 euros or without insurance you can also pay 100 euros Auction-ID: A3-46103-5950
Accessories included, Motor power P2: 1.45 kW Frequency: 50 Hz Speed: 2800 rpm Degree of protection: IP68 Maximum temperature: 40 °C Maximum immersion depth: 20 m Explosion protection: Ex db IIB T4 Auction-ID: A1-51285-424
Manufacturer: SCM Model No.: Tech 99L Machine Type: CNC Machining Center Year of Make: 2000 Machine weight: approx. 2,600 kg Electrical connection: 400 V / 3 phases / 50 Hz / 35 A Working range X: 3,000 mm, expandable to 3,800 mm Working range Y: 979 mm drilling / 1,200 mm milling Max. panel thickness: 180 mm Vertical spindles: 10 Horizontal spindles: 1+1 in X / 1 in Y Spindle speed: 4,000 rpm Drilling unit: 2.2 kW Z-stroke: 200 mm Feed axes: X/Y/Z 67 / 67 / 22.5 m/min Milling unit: ISO 30, 6.6 kW Tool changer: 4-fold, for tools up to Ø 120 mm Grooving and sawing unit: Ø 200 mm, bore 30 mm, 2.2 kW, 6,000 rpm 6 workpiece supports: 1,030 mm Vacuum pump: 100 cbm/h Working range X: 3,800 mm with roller conveyor according to equipment 4 positioning aids for heavy workpieces Control: PC-NUM 1040 Additional features: 10. ...
Suction plates with ø approx. 29 cm Auction-ID: A1-50663-1328
Auction-ID: A1-51285-279
TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts
GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz Total 2 nos.
Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...
Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...
Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...
Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. ...
Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C
Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one ...
Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...
used
Ladies and gentlemen, in the offer is an investment that could be suitable for an online mail order business. approximately 20,000 or more shipments per day. If you are interested, please contact us. Pictures and plans of the plant are available. Intermediate sale and error are excluded. Yours sincerely Trade & Translations
Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Damrow Double-0 5,000 litre cheesevat. Closed model, CIP cleanable. With Build-in wheydrain suitable for production from Mozerella, Gouda, Tilsit, cheddar, etc. 1x double walled no leaks 1x single wall In good condition. 2 pieces available.
Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...
used approx. 2.5 m³ / 2,500 litres polyester tank / GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 2.25 m; Ø = 1.30 m; H = 1.55 m (including bases) Aboveground, tank, incl. 2 steel bases, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...
Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use
Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
maximum number of results exceeded
please refine your search
520 € 
