tur 50 2000 used for sale

General SKU234S116 MakeBühler RWK 501 TypeSRK-440 No.10226398 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia 35mm Outletdia. 35m Motor55 kW 380 Volt MaterialStainless steel Information Floorspace2,4x1,3 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S815 MakeR&M Tycon Technoglass Spa No.10887 Year of construction2004 Mounted on legscheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialGlass Volume576 Ltr. Pressure3.5 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Notified body(TuV) Capacity500 Ltr (576 Ltr) Vessel sizesdia.1000 x646mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN100, DN80 OutletDN50 Max. temperature-30/200 degr.C. Information LocationBarneveld Floorspace1,5x1,5 m Total height1,2 M Weight750 KG CEcheckPressure vesselsTycon ItalyTanks > Pressure vesselsBrand > Tycon Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 Item #: Usm-239 Category UHT Plants BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 TECHNICAL DATA: Tetra Pak Automated uht for high acid beverages. The heat treatment in the steriliser is base on plate heat exchanger. TEMPERATURE PROGRAM: FOR TEA: 5Brix Heating: 25°C to 140°C (4 seconds) Cooling: 140°C down to 25–80°C FOR JUICE: 12Brix Heating: 25°C to 120°C (30 seconds) Cooling: 120°C down to 25–80°C CONDITION: B

Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

General SKU241S146 MakeBühler Cobra 501 TypeSRK 440 No.10208704 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 Volt Information With switchgearcheck Floorspace2,2x1,5 M Total height2,8 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1133 MakePaul Schwingel GmbH (D) LocationBarneveld Type500 ltr Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor6.8 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Open stirring vesselcheck Capacity550 ltr (nett 500 ltr) Vessel sizesdia. 800x1100mm Dished bottomcheck Flat top sidecheck With cover700x240mm With jacket(150 ltr) Max. temperature200 degr. C With anchor stirrercheck With paddle stirrercheck Motor6,8 kW 220/380 volt (Ex) Speed mixing shaft62 rpm Information No.963340 Year of construction1997 Mounted on legscheck Floorspace1,3x1,2 M Total height3,3 M Weight900 Kg ATEX compatiblecheckStirring vesselsPaul SchwingelStirring vessels > Stirring vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working con ...

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

General SKU234S123 MakeBühler AG LocationBarneveld TypeRWK Cobra 501/SRK-440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 400/690 Volt Information No.10257153 Year of construction1995 With switchgearcheck Floorspace2,3x1,2 M Total height2,9 M Weight2850 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

centre distance: 2.500 mm centre height: 250 mm grinding wheel diameter: 600 mm Total travel of the grinding support: 320 mm spindle speeds: 50 - 450 mm tool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Impulse IP-175 piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. Whats more, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.220 kg, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-31 ...

Key data: 800 kN

Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...

Key data: 1100 kN

Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 40 mm Injection weight: approx. 225 g Spray pressure: 2029 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Sepro S5.15 robot Year of Make: 2016 5-axis robot: ...

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

Key data: 510 mm, 3000 mm, 4 St.

HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg

BINOVA WATER RING PELLETIZER, constructed in AISI 304 stainless steel, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: 5 weeks time, capacity: 1.500 kg/h, conditions: reconditioned

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150 , Powder outlet height (mm): 695

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815

Allgaier vibrating screen, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 230/400 V , Engine: Elektror Motor , Dimensions (mm): 1100x700 H 1200, Powder outlet height (mm): 765

General SKU224T201 LocationBarneveld MakeJorns Main Features MaterialStainless steel Volume5000 Ltr. Specified Features - Stirring vessel MaterialStainless steel Stirring vessels Horizontal tankcheck Capacity5000 Ltr. Sizes1420x1560x2620 mm Dished frontscheck Manholedia. 400 mm Top connectionsDN 65, DN 40 OutletDN 65 Max. temperature50 °C With propellor stirrercheck Motor2,6/7 kW 380 Volt Speed mixing shaft470/950 rpm. Information No.31959/1 Year of construction1983 Mounted on legscheck Floorspace1,5x2,7 m Total height2,2 m Weight600 kgStirring vesselsJornsStirring vessels > Stirring vesselsBrand > Jorns What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU334N528 LocationBarneveld MakeHenschel TypeHU-500 Main Features MaterialAluminium/Stainless steel Volume500 Ltr. Motor15 KW Specified Features - Universal mixer Universal mixercheck Capacity500 Ltr Vessel sizesdia.900mm x650mm With covermanual operated Pneumatic operated outlet 300x200mm With motor15,0 KW, 380 Volt Rotor speed134 rpm Information Mach.No.821197 Year of construction1976 Mounted on framecheck Floorspace2,4x1,8 M Total height3,0 M Weight1100 KGUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

Key data: 500 kN

Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...

Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Di ...

Arburg 320C 500-250 Year of Make: 2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 500 kN

Arburg 320S 500-60 Year of Make: 2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Dimensions: Weight: 2350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pumps/motor: 11 kW Heating power: 4 kW Total power: 15 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 320C 500-170 e² / Hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air Valve x 2 Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started by our service technicians before they are sold. It is possible to rec ...

Key data: 500 kN

Arburg 370S 500-70 Year of manufacture: 08.2010 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3170 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machi ...

Trumpf TruLaser 5030 with double tower storage system - laser cutting system - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of construction 2013 Facilities - Working area: 3000 x 1500 mm - Closed machine frame - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drive - Closed beam guidance via optical cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Trumpf Laser - LLK according to standard layout (laser right next to the machine) - Laser cooling unit (water-air) - Excitation ...

Used Used labeller P.E. 4.500 bph: Year: 1998 Condition: Good Used labeller P.E | 8T adhesive Year: 1998 Speed: 4.500 bph Direction: Counterclockwise 8 heads Nr.3 adhesive stations Nr. 2 cold glue stations Safety protections Code: EA 448 More details: https://bottlingscout.com

MD-0107 Overhead Cut to Water - Brand: BAUSANO - Model: TDF-500 - Year: 2015 - With 1.5 meter centrifuge - Made of stainless steel - 5.5 hp (4kw) - With water bath and electrical panel

TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z  ...

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details.

Certus Steam Boiler & Water Tank Type: Junior 500 CVE Manufacture Year: 2012 Please see photos for further specification and information. For more information and more available stock please visit us at - advancedbrewing.co.uk

This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.

For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

max. format 51 x 33 cm Year of construction 2012 Stacking delivery Palamides Alpha 500 Double benefit Automatic format recognition Waste Rejection Vibrating device Pressing station Roller table Delivery date: immediately from stock Price on request. Worldwide Delivery & Installation

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg

50 litre BCD mixing tank with Huber temperature control (0 to 65°C) With agitation, lid lift, tank lighting, 4 vents. 1 CIP ball All documentation is in English (including FAT) 1 tank of their 1 Huber temperature control system are available., Volume: 57 liters, Useful volume: 50 litres, Metal tank: 316L, Tank metal: 316L, Pressure +: ATM, Pressure -: -6.5 ATM, Elec: 400V 50Hz , Agitation type: Tri-blade / from above, Stirring speed variation: Yes, Engine: ABB, Engine power: 0,25kW, Cover diameter: 450mm, Tank bottom outlet: Yes / 25mm , Event: Yes, Mobile tank: Yes, Double envelope: Yes, Double envelope metal: 304L, Double envelope volume: 10 liters, Double envelope pressure: + 6.5 , Double envelope fluid: Gas Group 2, Metal of the double envelope: 304L, Dimensions (mm): 600 x 1250 mm H2000mm, Weight (kg): 438 / 505 kg, Temperature design: 0-150°C , Design temperature: 0-150°C