127,277 used machines on RESALE, but how to find them? Machine Search
This TONGTAI HA-500II Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.
used
Manufacturer: Trumpf Model:TC 500 Machine type: Punching machine Find more here - / Contact us at -
Transnorm Rising falling Incline belt conveyor with arch GF 2900-8100-600-500 RA2464 Technical data: Conveyor length (NL): 11000 mm ( 2900 mm arch + 8100 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 11000 ( 2900 + 8100 ) Nominal / outside width in mm: 600 Belt width in ...
Transnorm conveyor belt GF 14000-600-500 RA2463 Technical data: Conveyor length (NL): 14000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller 1: Ø = 81 mm Belt return roller 2: Ø = 40 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor spe ...
greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Brand: SILMISA - Model No.: MSIT-500/2 - With cutting chamber: 720 x 540 - Open rotor - Engine: 50 hp (37 KW) - With electrical panel
Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 ...
General SKU280W437 MakeJöst TypeSMZ-500x1000 No.98.70286 Year of construction1998 LocationBarneveld Main Features MaterialStainless steel Surface0.4 m2 Size length940 mm Sizes width410 mm Specified Features - Vibro sieve MaterialPlastic, Stainless steel 1.4552 Vibro sievecheck Sieve surface0,4m² Number of sieve decks:2 Sieve sizes940x410 mm Inlet300 mm Outlet300mm x100mm, 500mm x60mm, 130mmx140mm, Dia. 170mm Drive vibro motorcheck Motor4 kW, 380-400 volt Sieve perforation30 mm 6mm Information Mounted on mild steel framecheck Mounted on stainl. st. framecheck Floor space2,60x0,90 m Total height1,10 m Weight680 kg Extra Specifications-cap. 4 t/h. -with extra vibro motor Vibro sievesJöstSieves > Vibro sievesBrand > Jöst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any desti ...
Cutting length: 4300mm, cutting height: 2200mm, cutting depth: 80mm, saw blade diameter: 30mm, bore: 30mm, speed: 4000rpm, machine dimensions X/Y/Z: approx. 5400mm/2900mm/1700mm, weight: approx. 1100kg. On site inspection is possible.
A CNC drilling and milling center Morbidelli is available. Travel X/Y/Z: 2600mm/800mm/55mm, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2200mm, weight: approx. 3300kg. An on-site inspection is possible. Available from May 2026.
Transnorm conveyor belt GF 1240-600-500 RA2466 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 500 mm, 600 mm with motor belt width (GuB): 400 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.10 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 Conveyor speed m / s: 1,1 scope of delivery: without supports and side guides Für eine ...
Transnorm conveyor belt GF 800-600-500 RA2431 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 1,42 scope of delivery: without supports and s ...
Transnorm conveyor belt GF 1240-600-500 RA2465 Technical data: Conveyor length (NL): 1240 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.10 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1240 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 Conveyor speed m / s: 1,1 scope of delivery: without supports and side guides Für eine ...
: 6 St. : 70/100 kg : ca. 820 x 740x 560 mm weight: ca.110 kg drawer measurements: 450 x 600 mm Colour: 7035/5012 RAL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Round profile pliers Z50 2.500kg 300-800mm North Griffin Load handling devices NP >2.5000€ like new, not used
sheet width: 3050 mm plate thickness: 6 mm rear stop: 10-1000 mm cutting angle: 0,5 - 2,5 ° down holder: 20 Stk no. of strokes: 14 - 23 Hub/min work height max.: 900 mm oil volume: 140 l total power requirement: 11 kW dimensions of the machine ca.: 4000 x 2150 x 1900 mm weight: 7800 kg Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - Angle stop 0 - 180 - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)
A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.
Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm
Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm
General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
General SKU400X1189 LocationBarneveld CEcheck MakeGross Type500 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume640 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck (Bioreactor) Capacity500 Ltr. (640 Ltr.) Vessel sizesø 1000 x 1140 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (7,7 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.7855 Year of construction2005 Mounted on legscheck and wheels Floorspace1,40 x 1 ...
Transnorm belt conveyor GF 3450-600-500 RA2469 Technical data: Conveyor length (NL): 3450 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3450 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of ...
Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you ...
Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm
Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg
Key data: 750 mm, 650 mm, 60 A
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU413X1251 MakeCelsius LocationBarneveld CEcheck TypeCWR500 Pressure Working pressure2.6 Bar Working pressure jacket2.6 Bar Technical specs Max. temperature140 °C Main Features MaterialStainless steel Motor9.2 KW Specified Features - Continuous dryer Screw dryercheck (screw heat exchanger) Double shaftcheck Continuouscheck Capacity1500 kg/h Product inletDN150 Manhole440 x 330 mm Product outlet250x700 mm With jacketcheck 25 l. Shaft can be heatedcheck Max. temperature140 °C Motor9,2 kW, 400/690 volt, Screw speed6.4 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.610269.C Year of construction2011 Mounted on framecheck With switchcheck Floorspace9,027x1,10 m Total height1,90 m Weight6210 kg Extra Specificationsinternal volume 2x 550 l., , steam heated Continuous dryersNew arrivalsCelsiusDryers > Continuous dryersNew ...
General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...
General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
This 4-axis Yida MH-500 horizontal machining center was manufactured in 2009. It features a spindle speed of up to 10,000 rpm, a pallet size of 500 Ã 500 mm, and a tool magazine with a 40-tool capacity. Ideal for high-precision machining with its LM linear guideways and rapid traverse rates. If you are looking to get high-quality milling capabilities, consider the Yida MH-500 machine we have for sale. Contact us for more information about this machine.
This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ã700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine.
This 5-axis Mazak VARIAXIS J-500 was manufactured in 2017. It features a Mazatrol Matrix Nexus 2 control, a Φ500 mm à 400 mm table, and can handle a maximum load of 200 kg. The spindle supports a BT40 tool shank and reaches up to 12,000 rpm. Dimensions are 2,565 mm à 3,225 mm à 2,840 mm, and it includes a chip conveyor and through-spindle coolant. Consider the opportunity to buy this Mazak VARIAXIS J-500 vertical machining centre. Contact us for more information.
This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information.
General SKU438X1385 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel Information MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Year of construction2013 Floorspace1.00 x 0,41 m Total height2,10 mStirrersYstralMixers > StirrersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information.
This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine.
This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ã500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.
General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...
This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 Ã 540 mm and axis travels of 1020 Ã 540 Ã 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information.
General SKU312X501 MakeJ. Engelsmann TypeVib speed 500 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Surface0.5 m2 Size length1000 mm Sizes width500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:1 Sieve sizes1000x500 mm With covercheck InletDia. 195/100 mm Outlet2x 165 mm Drive vibro motorcheck 2x Motor0,30 kW, 230/400 volt, 1500 rpm Sieve perforation0,315 mm With ball cleaningcheck MaterialStainless steel 1.4305 (303) Information Mounted on stainl. st. framecheck With switchcheck Floor space1,80x1,20 m Total height2,00 m Weight350 kgVibro sievesEngelsmannSieves > Vibro sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...
This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 Ã 2700 Ã 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.
This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine.
This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 â 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine.
General SKU397X1148 LocationBarneveld CEcheck MakeDe Dietrich TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume499 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 1000 x 1060 mm Dished bottomcheck Dished top sidecheck Manhole300x400 mm Top connectionscheck Outletcheck With jacketcheck (135 Ltr.) Max. temperature— 10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.54020 / 71431 Year of construction1982 / 2011 Mounted on legscheck Floorspace1,3 x 1,3 m Total height2,74 m Weight2000 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is ...
This 3-axis DOOSAN DNM 500 vertical machining center was manufactured in 2010. It features a large table size of 1200x540mm, capable of handling loads up to 800 kg. The machine operates with a speed of 36 m/min and includes a BT40 tool holder. Ideal for robust milling operations, the DOOSAN DNM 500 machine we have for sale represents a significant opportunity. Contact us for more information.
General SKU397X1149 MakeDe Dietrich LocationBarneveld TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 800 x 1060 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 With jacketcheck (135 Ltr.) Max. temperature—10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.58632 Year of construction1991 Mounted on legscheck Floorspace1,1 x Total height1,06 m Weight1600 kg Technical specs Extra information135 Ltr. 6 bar —10 / 200 °CGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth ...
This 3-axis +GF+ MIKRON MILL S 500 was manufactured in 2017. It features a stroke of 600mm x 450mm x 360mm, spindle speed up to 42,000 rpm, and a worktable size of 590x450mm. It supports a maximum workpiece weight of 200kg. Ideal for detailed and precise machining tasks. Contact us for more information.
This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
