tur 50 2000 used for sale

table length: 500 mm table width: 250 mm ampere: 50 A x-axis: 290 mm y-axis: 200 mm z-axis: 300 mm total power requirement: 6 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: m CNC-Controlled Die Sinker The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 140 mm turning speeds: 50 - 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 580 kg range L-W-H: 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5000 mm high: 2185 mm weight of the machine ca.: 0,98 t dimensions: 1,72 x 0,8 x 2,2 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 kN stroke: 40 mm throat: 73 mm Working height from to: 60 - 150 mm table surface area: 115 x 70 mm weight of the machine ca.: 10 Kg .Toggle lever hand press SPECIAL OFFER! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 580 x 580 mm operating pressure: 2,2 - 8,0 bar dimensions: 1,22 x 0,93 x 1,70 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 855 mm table width: 500 mm stroke height: 900 mm : 340 mm weight max. in kg: 500 kg weight of the machine ca.: 0,085 t : 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 5000 mm Tube length: 5280 mm numbers of toolholders: 6 : Rohr Edelstahl dimensions: 5,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 172 kg length in width: 620 mm length in total: 5400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 140 kg length in width: 620 mm length in total: 5000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FRYER, TS TECHNIEK BV, MODEL: HOF-5000x600 Technical description: Serial number: 200939-00124 Power supply: 400 V, 3 Ph, 50 Hz, 3 kW Mesh widht: 600 mm - (Stainless steel) Dimensions: 5000 x 1800 x 2300 mm With internal heating coil

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display, Screen diameter: 500 mm, Enlargement: 50 and 100 times, Swivel range of the upper table: +/- 2 mm, Connected load approx.: 230 V / 50 Hz, Dimensions W x D x H approx.: 1200 x 700 x 1800 mm, Weight approx.: 400 kg, colour: Light grey

Key data: 630 mm, 620 mm, 710 mm

ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.

Double-Belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. - Specifications: 65 liter hopper | all product contacting parts in stainless steel (SS340) | frame in mild steel with painted surface | Accuracy (depending on product): 0,5-1,0% | pre-Set-Option for 10 programs | max. speed of the machine in neutral: 15 cycles/minute. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available  ...

Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 5-50kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW | machine dimensions: L3300xW3000xH4700mm (including 1400mm standing frame/can be customized) | weight: 1800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...

Fully automatic powder filling system, double auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pneumatics, HBM weighing sensor (Germany). 2 packaging modes: High Speed or High Accuracy | - Specifications: stainless steel (SS304) version | filling range: 10-5000g, accuracy: +/- 0.3-1% (high speed mode), +/- 1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 50-200, ...

Basic Automatic Linear Auger Filler with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: Hopper volume: 45 liter | filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 40 cycles/minute | power: 380V, 1.6kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 di ...

Basic Automatic DUAL Linear Auger Filler (two filling stations) with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: hopper volume: 85 liter | Filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 80 cycles/minute | power: 380V, 3.2kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packag ...

Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-80, height 60-180mm with different can feeding screws | max. speed of the machine in neutral: 60 cycles/min | power: 220V, 1.6kW | machine dimensions: L1450xW1230xH1800mm | weight: 190kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new p ...

Semi-automatic auger filler for 100-5000g. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres | filling weight: 10-5000g (change of dosing screws required) | stainless steel version AISI 304 | servo motor | packaging accuracy: 1-2% (depending on product and total weight) | max. speed of the machine in neutral: 50/minute | current: 1.5kW, 3P, 380V | machine dimensions: L600xW800xH1000mm | weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainles ...

Stand-alone Auger Filler with weight feedback via load cell and dual speed filling (fast volume filling and then slow accurracy top up), including pneumatic flap to stop product after filling and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: Hopper volume: 100 liter | filling weight: 1.000-50.000g | stainless steel version with servo motor | packing accuracy: 0-0.2% (at 1-20kg), 0-0.1% (at 20kg and more) (depending on product and total weight) | max. speed of the machine in neutral: 30 cycles/min | power: 380V, 3.2kW | machine dimensions: L1130xW950xH2800mm | weight: 500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 ...

Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 1.4kW | machine dimensions: L1150xW1000xH2100mm | weight: 200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for cus ...

Stand-alone Auger Filler with weight feedback via load cell. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover.- Specifications: packing accuracy: 0-1.5% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 40 cycles/minute | power: 220V, 1.4kW | machine dimensions: L1150xW1000xH2100mm | weight: 200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized ...

Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 0.95kW | machine dimensions: L800xW790xH1900mm | weight: 130kg. Please note that our new prices ar ...

Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 5000kg/h | power: 380V, 5.5kW | hopper diameter: 650mm | discharge diameter: 420mm | height of vacuum pump: 1800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possibl ...

Vertical packaging machine with piston pump for dosing liquids. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...

Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...

Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are availa ...

Vertikale Verpackungsmaschine mit Schneckendosiereinheit f?r Pulver. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L600xW720xH1590mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...

Vertikale Verpackungsmaschine mit Kolbenpumpe f?r das Dosieren von Fl?ssigkeiten. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1720mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differe ...

Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1600mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediatel ...

Powder filling system for pre-made large bags/sacks with subsequent sealing and/or sewing of the bag/sack. The system includes product feed (screw conveyor), screw feeder with weight feedback, conveyor belts to feed to the heat sealing machine and to the sewing machine. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed and filled into the bag. Then it is manually guided by conveyor belt to the heat-sealing or sewing module and sealed or sewn. - Specifications auger filler: weight range: 10-50kg (when changing the dosing screw) | accuracy: +/-0,5% | max. speed of the machine in neutral: 8 cycles/min | capacity of storage hopper: 100L | power: 380V, 50Hz, 3kW | stainless steel version AISI 304 | machine dimensions: L1150xW1000xH2550mm | weight: 450kg. Specifications screw conveyor: Capacity depending on the product: up to 5m?/h | capacity ...

Fully automatic vertical system: automatic weighing, automatic bag feeding, bag opening, filling, shifting and output. Guiding into automatic bag sewing machine where it is sewed. Completely unmanned packaging process. Easy touch screen operation, quick format change. - Specifications: measuring range: 10-50kg | packaging material: hard plastic woven bags | max. speed of the machine in neutral: 12 cycles/minute | compressed air: 6bar, 0.6m? | machine weight: 1.600kg | power supply: 5kW, 380V. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Complete Large Vertical Filling System for premade bags. - Weighing range: 2.000 - 50.000g, max. speed of the machine in neutral: 16 cycles/minute. The system includes product elevator, automatic weighing machine, belt conveyor and bag sealding OR sewing machine. - For granule products like seed, pet food, etc.. The premade bags are clamped manually into the pneumatic clamping device. The product will be dosed by weighing and filled into the bag. By using the belt conveyor the filled bag will be passed to the sealing or sewing machine. - Platform- and In-/Outfeed-dimensions can be customized: Technical Specifications do depend on the final layout/construction of the complete system. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel fre ...

Auto Dosing Machine to dose agricultural products (potatoes, onions, etc.) into knitted sleeves, boxes, pallets, bags or cases. The products shall be cleaned and sorted out to have a smooth and trouble free operation. - Specifications: min. - max. size of fruits (mm): 20-120 | 70-Liter hopper (~ 50kg potatoes with sizes of 70-90mm) | dosing weights: 3-50kg (in steps of 0.01kg) | 2 parallel feeding conveyors (one for main volume, one for final fine filling) | max. speed of the machine in neutral: 6 cycles/minute | machine dimensions: L2800xW790xH2232mm | weight: 380kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sam ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has two filling heads for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 500ml | number of filling heads: 2 | max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 33 bags/min) | current: 220V, 1.5kW | air pressure and consumption: 5-7bar, 0.65m? | machine dimensions LxWxH: 1990x1300x1980mm | weight: 1500kg. Please note that our new prices are ofte ...

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 10-5000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.25kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 3-500g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vibration Feeder (volume ca. 500 l), infeed container for product with vibrating mechnism to supply product to infeed conveyor, stainless steel, L1600xW880xH1100mm, 250/300kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg