tur 50 2000 used for sale

Precision ball screw drive, KGT 50mm, Gewindelg 2670mm, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw /ball screw with nut - Thread nominal diameter 50mm, pitch 10mm, 4 turns, that means 40mm travel per turn of the nut, - Total length: 2930mm, - ball screw length: 2670mm Shaft end 1: 165mm lg - D32 x 35mm lg, thread M35 x 1,5 x 25mm lg, D35 x 85mm lg, D42 x 20mm lg Shaft end 2: 95mm lg - thread M25 x 1,5 x 28mm lg, D35 x 53mm lg, D42 x 14mm lg Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarante ...

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 99/64/H64 mm -Weight: 0.8 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 500 mm -Taper holder short taper: 6 -Inside diameter: 95 mm -Hole circle: Ø 133 mm -Weight: 82 kg

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm -Weight: 4.8 kg/piece

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-80-500-PPV-A -Piston diameter: 80 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 730/155/H95 mm -Weight: 6.9 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

USED STERLING SIHI GMBH ZTNC 50200 AA 002 1B 2 CENTRIFUGAL PUMP

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

Motor centering flange, motor flange, pump flange, motor centering bell, clutch bell, bellhousing for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -Large recess: Ø 115 mm -Dimensions: Ø 180/H41 mm -Weight: 0.5 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm -End position cushioning: adjustable on both sides -Price: per piece -Number: 4 pieces -Dimension: Ø 38/218 mm -Weight: 0.55 kg/piece

Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 500 mm -Dimensions: Ø 25 x 500 mm -Weight: 1.5 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P -Weight: 23 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Interior diameter: 51 mm -Weight: 32 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Inside diameter: 127 mm -ENR.625 EK-30/3-M-KE -Price: per piece -Number: 3 pieces -Weight: 27 kg

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

Surface grinding machine Make: LECHLER Model: 500 x 150

Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Drive from forklift: Still type EFG 1.0 / 5002 -Motor: 24 V -Power: 4 kW -Pole circle: O 270 mm M16 -Dimensions: 740/405 / H375 mm -Weight: 157 kg

V-belt pulley, belt pulley -Diameter: 508 mm -Total width: 120 mm -Straps: 6 -V-belt width: 17 mm -Socket: Ø 59 mm -Pulley: balanced -Weight: 46 kg -other pulleys: in stock

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -stable tool cabinet -2x shelves: extendable -Dimensions: 500/600/H830 mm -Weight: 36 kg

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -large recess: Ø 115 mm -Quantity: 1 available -Price: per piece -Dimensions: Ø 180/H71 mm -Weight: 0.6 kg

Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives