tur 50 2000 used for sale

Centrax 501 KB57 DLE Gas Turbine-Generator Package engine overhaul in 2017 at 24 000 hours 372 start service hours 23 000

table load: 500 Kg table load capacity: 250 kg. vertikal table diameter: 550 mm swivelling range: 135 (-45 - +90) Grad turning speeds: 0 - 5 stufenlos U/min connected load frequency: 230 V total power requirement: 0,8 KW weight of the machine ca.: 0,255 t dimensions of the machine ca.: 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mm table load: 0,5/0,25 t swivelling range: 0 - 90 motorisch Grad turning speeds: 0,2 - 2,5 U/min spindle bore: 100 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt weight: 290 kg Dimensions (LxWxH): 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

NC Lathe Gildemeister Nef 500 BJ 1996

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Mori Seiki SL250 b 500 High-performance CNC lathe with bar feed (Kupa 2 m) Collet chuck Passage 65 mm Year of construction 1998 Control Fanuc 16l Block Recording Switch-on hours approx. 88875 Spindle hours 19,000 Miscellaneous accessories:

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC turning diameter over slide: 880 mm turning diameter over bed: 1220 mm tail stock: M80 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm spindle turning speed - stepless: 0 - 1000 U/min spindle motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m complete retrofit in 2020 - CNC Control Fagor 8055 TC - Tool holder turret:SAUTER model 0.5.320.025, vertical axis - Chip Conveyor - 4-jaw chuck Ø1000 mm - 3-jaw chuck Ø500 mm - Steady Ø500 mm - Movable bezel Ø250 mm - Special bar for machining very long interiors - Coolant RETROFITTING IN 2020 • Grinding of carriage guides on the X and Z axes • Preloading of X and Z axis ball screw nuts • New Turcite placed on the X and Z axis carriages • General review and disassembly of the engine and head regula ...

Turbine Control Woodward 505 Turbine control, built in 2007 of 2600 KW Condensation turbine with 0 operating hours 1 available. 3.3 KV / 100 V, 50 Hz, 626 A Price: 6,900 €, plus VAT, FCA-free. Turbine Control Woodward 505 Manufacturer: Woodward Type: Turbine Control Rated power [KVA]: 3,575 Voltage [V]: 3.3 KV / 100 V Frequency [Hz]: 50 Operating voltage [V]: 24 Rated voltage [A]: 626 Year of Make: 2007 Dimensions [m]: 1.60 x 0.60 x 2.00 Weight [kg]: 500

Key data: 900 mm, 5000 mm

Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system

CORE GAS TURBINE SAMC POD FOR TRANSPORT INCLUDED

Inv. Num. : 6136 Type: CTX alpha 500 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Switch-on hours: 22803 h Hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Feeder CNC Spacesaver SS 2500 (2018)

Key data: 260 mm, 500 mm

Turning-milling centre Manufacturer: Mori Seiki Type NL1500SY/500 Year of construction 2007 In operation 03/2008 Control MSX-850-III Y and C axis All 12 turret stations are powered Max. turning length 500mm max. turning diameter 260mm Spindle Passage 50mm Speed of the driven tools 6,000 rpm Feeds X Z B 30,000 Y 10,000 with LNS rod loading magazine, length 1000mm, max D 65mm reducer sleeves. Machine is sold with all accessories, steel holders, AGWs (all still very good) collets, chuck, pick-up chuck, documentation, extraction system. Machine only ran in single-shift operation.

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This BIGLIA B 501 MB (1997) Lathe machine was manufactured in 1997. This machine has a tank capacity of 200 liters and a pump flow rate of 100 liters per minute, driven by a pump motor with 0.5 kW power. Regarding its axis specifications, the x-axis has a travel distance of 210+5 mm and moves at a speed of 20 meters per minute, while the z-axis travels a distance of 500+10 mm at the same speed. Contact us anytime for further information.

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information.

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

This Takisawa EX-508 was manufactured in 2006. A horizontal turning machine featuring a turning diameter of 300 mm, length of 380 mm, and a robust 12-position turret. It includes a Fanuc 18 i TB control, ensuring precision and ease of operation. Ideal for detailed turning tasks, it also boasts a spindle motor power of 11/18.5 kW for demanding operations. For more information about this machine, please reach out to us.

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.

FOR SALE CORE TURBINE CENTRAX 501 KB5 I don't have any more information since the factory has closed LOADED NOW IN FRANCE GOOD PRICE

spindle passage: 80 mm max. turning diameter: 460 mm Max. Turning length: 1.000 mm control: System TX 8F max. Spindle speed: 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details.

This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.

Key data: 5000 mm, 17000 mm, 4000 mm

5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.

This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us.

turning diameter: 390 mm turning length: 2250 mm control: Sinumerik 840D swing diameter: 610 mm cross movement. (x-axis): 605 mm longitudinal traverse (z-axis): 1.870 mm y-axis: 210 mm b-axis: 240 ° Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mm Longitudinal travel (Z3): 1.840 mm main spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: max 82 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 82 mm Diameter in front bearing: 180 mm Counter spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: 92 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 104 mm Diameter in front bearing: 180 mm Main spindle drives left and right: - power requirement: 45/47 kW speed area: 20 - 3.200 1/min Buckling speed: 650 1/min torque: 650/ 1.080 Nm C-axis speed: 3.200 1/min Torque C-axis: 660 1/min Partial  ...

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

CORMAK CKT 500x850 CNC turning center was built in 2016 in Poland by CORMAK. The machine is designed for the precision machining of metal workpieces with a maximum diameter of 500 mm and a length of 850 mm. It enables a wide range of advanced operations, such as drilling holes, threading, and turning of cylindrical, conical and spherical surfaces. Thanks to its wide range of machining capabilities, the machine is ideal for the production of precise and repeatable parts used in various industries. The CORMAK CKT 500x850 features a rigid design that ensures stable operation even during intensive use. Workpieces clamped in a 10-inch manual chuck are machined by means of a spindle reaching a maximum speed of 2000 rpm and cutting tools placed in a 6-position turret. Precise positioning and support of the workpiece during the process is ensured by the tailstock. All machining parameters are ...

turning diameter: 820 mm turning length: 5000 mm turning diameter over slide: 460 mm control: B2T max. torque on the spindle: 3400 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mm steady: 525 mm steady: 335 mm main drive motor: 50 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...

table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Leadwell LTC-50CL CNC Drehmaschine (10/2006) Hersteller: Leadwell Typ: LTC-50CL CNC Drehmaschine Baujahr: 10/2006 Zustand: gebraucht, gut, in Produktion Optional mit Zubehör Weitere Informationen folgen

Used machine NLX2000SY with loading magazine Machine Type: Turning Center Model No.:NLX2000SY Manufacturer: DMGMORI Control: CELOS Year of construction/IB: 2021/2022 Location:: Germany - Main spindle 15/11 KW - Chuck for main spindle - Automatic path control of the clamping cylinder for the main spindle. - Sub-spindle 11/7.5kw - Chuck for sub-spindle - Automatic path control of the clamping cylinder for the sub-spindle - Double footswitch for HSp and GSp - Coolant shower on lining - Spindle 2 tailstock specification - 20 Station turret - Milling drive for all stations 10,000 min-1 - Direct position measuring system X-Y-Z axis - Y-axis - Chip conveyors - Coolant pump 8bar - Bar feeder IF - Parts catcher conveyor belt for parts - Irco Bar Loading Magazine MUK 7012 III - Workpiece ejector (headstock 2) - Oil separator - Alternating speed - Spindle orientation ...

Baumann BSW2-500L Pile Turner Age: 2004 Format: 55 x 75 cm Capacity: 500 kg With Ventilation System

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...

faceplate diameter: 5000 mm swing diameter: 5500 mm turning height: 3500 mm max. ram stroke: 1800 mm faceplate turning speed range: 0,5 - 50 U/min workpiece weight: 20 t feed per revolution: 0,056 - 4,25 mm rapid traverse: 2 m/min Control: Sentrol total power requirement: - kW weight of the machine ca.: - t - Sentrol CNC control system - Faceplate - 2 vertical ram supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately