tur 50 2000 used for sale

This 3-axis Nicolas Correa Euro 2000 was manufactured in 1997. It features a Siemens 840 D control system and a Ganfior electro-spindle capable of reaching 10,000 rpm. The working envelope is 2000 × 1250 × 700 mm with a spindle taper of SK40. It supports a maximum table load of 4,000 kg and weighs 13,000 kg. If you are looking to get high quality milling capabilities consider the Nicolas Correa Euro 2000 machine we have for sale.Contact us for more information.

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

x-travel: 1250 mm y-travel: 1000 mm z-travel: 1000 mm taper ISO: 50 Table dimensions: 650 x 1000 mm spindle speeds: 32-1600 voltage: 380 V Control: Philips total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

swing over bed - 500 mm distance between centers - 2000 mm accesories DRO Heidenhain

plate width: 5000 mm plate depth: 2000 mm plate height: 400 mm total power requirement: kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: ap ...

- Complete machining with twin spindel, upper and lower turrets - Kitagawa 3 chuck left and right - Tool holders with driven tools axial and radial - Large jaws cabinet with inserts - OGL Gantry loader with ca 10 Kg load capacity - Chip conveyor - Paper Filtration Pressure Tank

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

- Spindle SK 40 - Speeds 8000 Rpm with 165 Nm - Workload 2000 Kg - ATC 56 Positions - Hours spindle 10.304 - Closed housing with automatic top door - IKZ Coolant system - LTA Air Cleaning

turning length: 2000 mm greates pass round over bed: 630 mm swing diameter over slide rest: 350 mm control: Monforts Control System K bed width: 550 mm turning speed range: 2 - 1800 U/min spindle diameter in front bearing: 120 mm spindle head DIN 55027 - Size: 8 tool taper: RD2 PARAT quill stroke: 210 mm spindle bore: 71 mm total power requirement: 30 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,90 x 2,10 x 2,00 m Three-jaw chuck / key bar / Ø250mm Four-jaw chuck 3-jaw chuck for tailstock 4-station tool post head PARAT Fixed steady rest, Ø small Fixed steady rest, Ø large Various chuck jaws, live centers, live centers, tool holders Chip conveyor with coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis HEDELIUS RS 60 K - 2000 was manufactured in 2005. It features a generous X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine can accommodate a maximum workpiece weight of 1000 kg on the fixed table. If you are looking to get high-quality machining capabilities, consider the HEDELIUS RS 60 K - 2000 vertical machining centre we have for sale. Contact us for further details.

Hanging cabinet HS 2000 with sliding door with intermediate floor Used device cleaned Dimensions: 2000 x 400 x 600 mm, WxDxH

Anchorage Rego SM 2000 M The machine when it comes to striking! Stirring machine with automatic timer Working Shaft/Agitator Shaft NEW Connection 400V, 16A-CEE plug Used machine overhauled with warranty

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate and feet, desludge tank, control panel (original Westfalia), water valves, all inlet/outlet pipes with manometer / flowindicator and service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 4.700 rpm, Motor power: 37 kW - 380 V - 72 A - 1.475 rpm - 50 Hz - 3 Ph, Weight: 2.200 kg, Dimensions: 190 x 130 x 225 cm

CNC vertical machining center Type: Mill 2000 Manufacturer: Chiron Year: 2013 Control: Siemens Sinumerik 840D Hours: 17000 X: 2000 mm Y: 700 mm Z: 550 mm Spindle speed: 9000 rpm Spindle taper: HSK-A63 Table: 2600 x 710 mm Max table load: 1000 kg Weight: 10700 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Work table AT 2000 with beech wood top and sliding door Work table Baker's table mobile Beech wood worktop Used device cleaned Plate sanded & re-oiled

weight max. in kg: 2.000 kg table height: max. 1.010 mm table height: min. 190 mm table surface area: 800 x 1.300 mm engine: 0,75 kW The Unicraft SHT 2000 hydraulic scissor lift table (1300058) offers a reliable solution for your lifting projects, e.g., for manually feeding a planer or saw with entire stacks of wood. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and protecting the back of the machine operator. Drive: Electro-hydraulic Cable length: 3 m Safety standard: EN 1570 Condition: New with warranty The data for this ad was created with ModulMW ...

Work table AT 2000 with beech wood top and flour trolley Work table Baker's table Beech wood worktop 3 ingredient containers on the left Stainless steel flour trolley for 100 kg Used device

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Key data: 630 mm, 630 mm, 630 mm

General Manufacturer: Heller Type: H 2000 Year of Make: 2011 Control: Siemens 840D SL Travel X/Y/Z: X 630 mm Y 630 mm Z 630 mm Working spindle Spindle speed: 10,000 rpm (new since 12/2024) Tool holder: SK40 Tool changer: 160-fold Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: 6-compartment pallet storage Large IKZ plant Rotary table 360° Pallet size 500 x 400 mm Renishaw touch probe

Rego SM 2000 Automatic Stop Machine / Stirring Machine Product description: âœ" Condition: used, tested, baker's condition âœ" Manufacturer: RMT - Rego GmbH âœ" Type: SM 2000 âœ" Year of construction: 1996 âœ" Power (kW): 1.68 âœ" Volt: 400 âœ" Amp.: 8.13 âœ" incl. 1 stainless steel kettle and 1 whisk âœ" electrically driven height-adjustable kettle Details see pictures

Jelly spraying machine - is used - Manufacturer: Bakon - Model: Jelly 2000 M (G) - Year of construction 2004 - Exterior Dimensions W.: 48 cm, D.: 48 cm, H.: approx. 110 cm For details see pictures.

Model: 2000/600 Condition: Used Stock Number: 3297 Belt width: 600 mm Description: Variable speed Transport length 2000 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 2200 x 850 x 1200 mm

Separating clutch, adjustable gear motor, variable speed gear motor, electric motor -Spare part comes from a Heyligenstaedt type Heycop 3UN / 2000 -Rapid traverse: for lathe -Gearbox manufacturer: SEW -Motor manufacturer: SEW type DFW80K-2BS -Motor power: 0.75 kW 2760 rpm -Gear output speed: 1480 rpm -Brake and clutch: 24 V -Hollow shaft: Ø 25 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 615/350/H240 mm -Weight: 56 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 2000 mm -Length: 4000 mm -Height: 255 mm -Plate thickness: 95 mm -Plate: with support ribs -Groove width: 42 mm -Groove spacing: 700 mm -Number: 2 clamping plates available -Price: per piece -Weight: 6600 kg/piece

Frequency converter, frequency converter, drive converter, controller, variable speed drive, solar cable -Manufacturer: Aurora, PV inverter unused from stock liquidation ovp -Type: PVI-2000-OUTD-DE -Max. Continuous output power: 2000 W -Price per piece -Quantity: 26 pieces -Dimensions: 420 x 310 x 144 mm -Weight: 12kg/pcs

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Roller conveyor, roller track, roller conveyor, roller conveyor, conveyor belt, roller track -Handover: in its current condition as inspected -Condition: Belt missing, geared motor present -Roller width: 640 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Roller conveyor height: 1140 mm -Intermediate dimension at the top: 820 mm -Roller diameter at the top: 50 x 45 -Dimensions: 1100/2120/H1140 mm -Weight: 120 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer: with 1-axle turntable steering -Platform: 2000 x 1000 mm, height 525 mm -Load capacity: 3000 kg -Tires: solid rubber -Trailer coupling: for industrial trailers -Dimensions: 3515/1000/H525 mm -Weight: 264 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 D23 Ø 20.0 PTFE VA -Connection: DN20 PN16 -Number: 2x valve available -Price per piece -Dimension: 220/100/H90 mm -Weight: 1.4 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 40,0 PTFE VA -Connection: DN40 PN16 -Dimension: 260/103/H250 mm -Weight: 3,3 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Handover in the current condition as seen -Flatness: see photos (slip not included) -Clamping plate: with supporting ribs and heating device -Length: 2000mm -Width: 1510mm -Plate thickness: 60 mm -Plate: with support ribs -Transport dimension: 2000/1510/H880 mm -Weight: 1640 kg/pc

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 2500mm -Width: 2000mm -Plate thickness: 40 mm -Plate: with support ribs - Flatness: see photos (guideline not included) -Transport dimension: 2500/2000/H875 mm -Weight: 3110 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Handover in the current condition as seen -Flatness: see photos (slip not included) -Clamping plate: Steel plate on a solid base -Length: 1500mm -Width: 1200mm -Plate thickness: 42 mm -Plate: with support ribs -Transport dimension: 1500/1200/H900 mm -Weight: 750 kg

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: shelf with roller conveyor, mobile, height-adjustable -Plate: 2000 x 1000mm, thickness 3mm -Height: 980 to 1160 mm -Cut-out: 250 x 250 mm -Steel frame: solid with castors -Total dimensions: 2000/1000/H980 mm -Weight: 90 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece -Dimensions: 240/155/H275 mm -Weight: 14 kg