tunnel furnace used for sale

specifications: - Nominal /permanent temperature can be selected up to approx. 1150 ° - digital temperature setting - Timer - Interior size approx. W 250 x H 190 x D 400 mm - Loading by front door - Opening width of the front door B 240 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg

Gas-heated conveyor belt furnace

3 EMOD electric motors are for sale for Degussa chamber furnaces type GKU ... 2 type 132S / 6 unused with the following performance parameters: Power: 2.2 KW Speed: 970 Flange: d = 250mm Protection class: IP 54 1 pc.type 132S / 4 unused with the following performance parameters: Power: 4 KW Speed: 1.430 Flange: d = 250mm Protection class: IP 54 Sold without warranty or guarantee!

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Ceramic furnace,Gravers Bjerre type C-R,5,5 kW,max. temp. 1150°C

Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1150 Grad size of opening: 260 x 160 mm depth of chamber: 450 mm total power requirement: 8 kW weight of the machine ca.: t Hardening furnace The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

type: gas-fired rotary hearth furnace with central recuperator and air preheating max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

max. temperature: 420 Grad size of opening: 200 mm depth of chamber: 350 mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electroventilated heating furnace Idrocalor mod MOD: EVE Year of construction 2017

max. temperature: 750 Grad size of opening: 600x600 mm depth of chamber: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...

Key data: 650 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

Key data: 850 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

Key data: 300 mm, 1200 , 670

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

Glasbeek Finish Gas Poederwand Chamber Oven 250°C Glasbeek Finish Gas Poederwand Chamber Furnace Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V YOC 2003 Approximate internal dimensions (W1200mm x D3100mm x H1400mm) with loading trolley L2800 x W1020mm Approximate external dimensions LxWxH approx. 320x240x250 cm

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

Water-cooled high-frequency induction continuous furnace for inductive local heating, activation of getters, hardening & starting and much more

Key data: 260 mm, 1900 , 1430

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available With safety system for solvent-based substances according to DIN 1539 -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Capacity 1500 liters -Tmax 260°C -Controller P570/ 50 programs each 40 segments freely programmable -NtLog for controller recording the data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connected load 39 KW -Weight 1150 kg -incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment.

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Key data: 800 mm, 1400 , 2700

in stock, as good as new, with 12 months warranty -max. temperature 800 °C -Application temperature 750 °C -Heating time from 15 °C to 700 °C approx. 3-5 hours -Insert mass complete 2600 kg -Connected load heating 4 x 47.25 kW = 189 kW -2 compact fans -Furnace circulation capacity approx. 3,000 x per hour -Control zones 4 pieces -Program control IMAGO 500 -Touch panel TP 700 Color -Overtemperature controller -Thermocouple regulator 4 x NiCr/Ni type K; Class 1 -Thermocouple overtemperature 2 x NiCr/Ni type K; Class 1 Furnace volume 6.0 m³ Internal dimensions: Width (clear) approx. 1400 mm Depth (clearance) approx. 2700 mm Height (clearance) approx. 1600 mm Height of furnace base approx. 585 mm External dimensions: Width (without switchgear) 2300 mm plus switchgear approx. 500 mm Depth 3300 mm Height (with lifting door) 4200 mm (transport height 3100 mm)  ...

High temperature furnace, make GERO type: ULO 40/10- 2G heating: electrical useable space: ø400 x 600 mm temperature: max. 1.000°C room conditions: ventilation / exhaustion voltage: 400V connected load: 25 kVA control: MODCON with Modvis 2000

El. heated chamber furnace, make VEI type: VEI_KO_EB max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

El. heated roller sintering furnace, make Riedhammer condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

Technical data Max. temperature: 500 °C

DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h

DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h

Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air

Technical data Max. temperature: 950 °C Working space: Width: 100 mm Height: 100 mm depth: 300 mm Total installed power: 3 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg External dimensions: Length: 1000 mm Width: 700 mm Height: 1100 mm Various accessories: Protective furnace gas device

Key data: 260 mm, 1250 , 1250

We constantly have new and used convection chamber furnaces on offer. Give us a call! Convection chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and drive-in channels and exhaust fan Demo unit, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs each 20 segments freely programmable -NtLog for controller recording the data via USB stick -Temp. uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air flow rate 125m³/h -Auxiliary: Controlled cooling (exhaust fan) Entry rails Bushing 40 mm -Connected load 27 KW -Weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We ar ...

Key data: 450 mm

We always have convection chamber furnaces on offer. Give us a call! Very good condition, 12 months warranty -free-standing, on base -Temperature max.: 450 °C -Volume of furnace chamber: 250 liters -Exterior: 1002+225 x 1636 x 1860 mm(W x D x H) -Furnace chamber: 600 x 750 x 600 mm (W x D x H) -Controller C280, 9 programs each with 4 segments -Temperature uniformity: ± 6°C according to DIN 17052-1 -strong air circulation, air guide box for optimal air flow -Supply and exhaust air flap manual -Connection flange for supply air fan under furnace -Permissible batch weight: 125 kg with distributed load per rack -1 bottom plate incl. -2 slide-in plates additionally available on request -Connected load: max 13 KW -3phase -Documentation -Weight 610 kg Viewing in our warehouse by appointment.

Key data: 850 mm

We always have convection chamber furnaces on offer. Give us a call! it 12 months warranty, from 2023, original packaging, in stock -500 liters -Max temperature: 850°C -with controller P570 ( 50 programs with 40 segments each ) - Process documentation on the customer's USB stick -Furnace chamber: W x D x H 750 x 1000 x 750 mm -Temp. uniformity +/- 5 °C according to DIN 17052-1 in the empty furnace room -Max 125 kg charging weight opt. Tray (not included) -Connected load approx. 28 KW -not suitable for solvent-based substances - Documentation, CE declaration Auxiliary: Controlled cooling (exhaust fan) Viewing in our warehouse by appointment. We stock new and used industrial furnaces. Get in touch with us!

Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

Ingot dimensions: 830x830x250mm, max. load: 400kg, max. operating temperature: 1570°C.

Max. operating temperature: 1100°C, nominal power: 53kW, weight: 1.2t.

Max. operating temperature: 300°C, nominal power: 8.55kW, connected load: 9.1kVA, weight: 500kg.

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

There are two identical Chamber Furnaces GFO available, operating temperature: 50-250°C, heating output: 7.8kW, usable space dimensions: 1000x580x760mm, length: 1000mm, width: 1500mm, height: 1900mm, without control cabinet.

Max. operating temperature: 700°C, connected load: 24kW.

Rehm Thermal Systems Nitrogen-control Reflow Oven Nitrogen Melting Furnace Type: V8.1 Nitro 3.2 B Year of construction: 07/2008 Voltage: 3 x 400 V 50 Hz Power: 76 kW Cooling: 20l/min.; 2 bar min Nitrogen: 20m³/h Exhaust air: 400m³/h Dimensions: approx. 6000 mm x 1500 mm x 1700 mm Functional: not tested Condition: used The technical data can be found in the type plate. The offer includes only the parts shown in the photos. If you have any questions, inquiries or the like, please send us an e-mail.

Inner dimensions: 440x540x700mm, max. operating temperature: 1050°C, connected load: 21kW, weight: 490kg, including spare parts, accessories and documentation, available in August 2023.

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.