tunnel furnace used for sale

• Heating tunnel INFID: • Year: 2009 • Producer: INFID • Speed (BPH): 7.000 bph • Used Heating tunnel INFID composed of: • 8.5 m2 internal heating tunnel. • No. 2 centrifugal pump for hot water recirculation. • No. 2 recovery tanks with water heating by steam. • Suitable for heating approximately 7,000 bph of 0.750 liters of sparkling wine. • Dimensions: - Length 5,500 mm X width 2,800 mm. • All in stainless steel. • 2-way belt for bottle entry. • 3-way output belt. • Safety protections. • Code Y 10

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs

Used tunnel with bulk wrapping machine and wrapper in shrink wrap.

Ecopack 650 is a semi-automatic machine specialized in LDPE shrink wrapping. These machines are extremely versatile and easy to operate. A simple and inexpensive way to pack a variety of products (bottles, vases, jars, boxes) The film is applied from one roll (located at the bottom of the machine). The worker manually wraps the product and cuts off the foil with a resistive wire (impulse sealing). After cutting the foil, the product moves to the tunnel where the shrinkage of the foil takes place. Machine dimensions: 1900 x 1100 x H 1700mm Entrance: 680 x 440mm Tunnel length: 1150mm max. product dimensions: 350 x 350mm Weight: 250kg Sealing width: 650mm Efficiency: up to 8 cycles/min

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Product number: 1948 Type: COO 1350x6000 Serial number: 3-000015705 Year of construction: 2015 Belt width: 1350 mm Tiers: 3 pcs .Belt speed: 2.4 - 18 m/min .Heating: thermal oi lCooking length: 1 or 3 x 6000 mm Power: 3 x 400V, 50Hz, 18.6kW Dimensions: 8100 x 2850 x 2900 mm Flexibility in tiers: 1 linear or 3 multi-tierWith With NOVAtech dew point measurement With Clean In Place system (CIP) Provisur / Marvu infeed belt Project number: 140347200 Type: 390 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Infeed height: 1200 mm Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 2300 x 2100 x 1900 mm Weight: 700 kg Provisur / Marvu outfeedbelt Project number: 140347300 Type: 614 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions; 2350 x 1700 x 1200 mm Weight: 330 kg Adjustable in height and lengt ...

Sleevit Shrink tunnel Model: Shrinkmaster 750 Stainless machine on variable speed stainless slat chain conveyor, belt width 120mm, max product height 250mm, overall length 3000mm, 3Ph

working hours 18'685 at the customer's request, we will send photos and a video

Standard

Belt: app. 880m long x 48,9cm wide with 12,5 cm clearance between levels Drum drives: 3 drives (2 x 1.1 kW + 1 x 1.5 kW) Tensioner drive: 0.37 kW Cooling: 3 x 5.5 kW fans Cooling agent: Ice Water app. 2C. Inlet temperature: 60-80C Outlet temperature: 20C Holding time: 60-120 min adjustable. Capacity: app. 2.5-3 tons per hour Manual: Available Spare parts: 1 x main bearing, 2 x drum transmission Condition: Good, disconnected from operation in May 2019

Beck MP240F Year of construction: 1993 Item no. 493 16 Rated current: 5A Rated voltage: 230/400V 3~50Hz incl. shrink tunnel type HV 400 Year of construction: 1993 Item no. 493 1324 Rated current: 13A Rated voltage: 230/400 V 3~50Hz incl. conveyor technology (1 piece inlet, 1 piece transverse thrust in the outlet)

Passage height 220 mm Belt inlet 500 mm width Dimensions 1800 x 1150 x 1200 mm

M. No.: 12091 Equipment / Additional information: DESCRIPTION: The sealers Pactur thanks to their production concepts, can be easily transported. The electronical control grants good performances and user friendly functioning. Although they have a limited foot print, are equipped with a real shrink tunnel, which grants high packaging perfomances and excellent results. The machine has two conveyor belt movement cycles, choiceable from the control panel: forward-forward and forward-reverse. Forward-Forward, with product outflow from the side opposite the load, for greater productivity. Forward-Backward, with product return to the operator, for fragile products or logistical needs. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Semi-automatic sealer with shrinking tunnel Pactur type Lady Pack 45/SL 2 includ ...

Shrink tunnel,Elwis type 14-S-065,15.000 W,max. unit size: H 400 x W 650 mm.

Shrink tunnel,Flodab type K-52+TRM70,W 550 x H 400 mm

Drying tunnel,stainless steel,Tinofix type 725

HugoBeck films packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items have been packed: Item size: 150 x 80 x 240mm – these in one pack 4 rows x 9 individual bottles with the dimension 730 x 600 x 245mm HugoBeck automatic film packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items were packet: Item size: 150 x 80 x 240mm - these in a pack of 4 rows x 9 individual bottles with the dimensions 730 x 600 x 245mm Envasadora automática de film HugoBeck con túnel retráctil - Año de construcción 2015 - Aprox.81.000 horas de funcionamiento (total) - Los siguientes artículos fueron embalados: Tamaño del artículo: 150 x 80 x 240mm - estos en un paquete de 4 filas x 9 botellas individuales con las dimensiones 730 x 600 x 245mm

IWM Sanitiser tunnel Model: SAN100E Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph

IWM Sanitiser tunnel Model: SAN100E Serial: 1281-S1E 2014, Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph

Reversible tunnel pasteurizer capacity up to 2.500 bph/cph 500 ml For beer, CSD, and juice

Automated shrink packaging machinery with conveyor belt heat tunnel including a pallet of shrink wrap rolls and an infrared sterilizer that we have available in stock can also be added, purchased machinery transported through customs and never used

shrink tunnel Useful product dimensions: 450 x h200mm Voltage 380V Power: 7kW

Two Ulma Ovens with retractable inlet and outlet openings, built in stainless steel. 1 works, the second oven has a thermostat failure and the fan contactors would have to be changed.

AM60 VACUUM PUMP SPA MONOBLOCK WRAPPING MACHINE SEMIAUTOMATIC WITH ELECTROMECHANICAL OPERATION LOADING SHOVEL PASSAGE OF THE OVEN 600X420 mm OVEN TEMPERATURE ADJUSTABLE UP TO 240 C ° COOLING UNIT AT THE OVEN OUTLET. WEIGHT Kg 600 VOLT 380 Hz 50

Graham Z3271 Steam tunnel Stainless frame and stainless mesh belt 3000mm x 380mm belt Variable speed With Hydromatik steam generator

Shrink packaging FL5545TB L sealer and shrink tunnel, 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed

Stainless sanitiser with plastic intralox belt, belt dimensions 2450mm x 700mm, max product height 500mm, with recirculation tank and pump, 3Ph

Line consisting of an FBM Maestria coating machine and its SOLLICH MK 420 cooling tunnel

Belt width: 3,000mm; Belt length: 24,000mm; Number of burner towers: 1; Band Type: Stone Slabs; Analog control; Dismantled

REF-827 SLEEVE WRAPPER AND SHRINK WRAPPING MACHINE MEURER CM SB60-B The Meurer CM/SB-B sleeve wrapping machine produces sleeve-wrapped packages, with or without lateral shrink wrapping. The film is stretched lengthwise, for which reason it fits any product to perfection. Manufacturer: Meurer Model: CM/SB60-B Year: 2010 Product dimensions min/max: Length 40-400mm; width 50-600mm; height: 40-350mm Sealing jaw width: 600mm Film reel diameter: 400mm Overall dimensions: Length 1,520mm; width 1,430mm; height 2,090-2,140mm. Performance: up to 50 cycles/min depending on product and film specifications 400/230V + N + PE. Power: 3kW (without side shrinking), 11kW (with side shrinking unit) Air connection: 6 Bar, 1/2" Sealing system: permanently heated sealing tool with sealing blade and electronic temperature control. Easy access due to an open construction. Quick, tool-less ...

Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation.

Connected load: 12kW.

Opening width/ height: 600/ 300mm.

Connected load: 18kVA.

Connected load: 13kW.

Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible.

Mobile heat tunnel for shrinking of film bundles with film overhang

Steam shrinkage tunnel incl. steam generator (without transport conveyor)

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995

1 BECK shrink tunnel type HV601, working width 60 cm, year 1999

Large shrinking tunnel for PE or PVC wrapped products. Suitable to be combined with all SLEEVEshrink machines (single ones/except S10 and S6). - Specifications: power: 380V, 24kW | max. speed : 0-13m/min | max. product size: W450xH350mm | machine dimensions: L2800xW900xH1720mm | weight: 550/600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

PRO-version shrink tunnel to heat shrink very large products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XXL (vertical) PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW800xH300mm | tunnel size: L2400xW850xH400mm | machine dimensions: L2400xW1320xH1750mm | power consumption: 380V, 24kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are availabl ...

PRO-version shrink tunnel to heat shrink very large and wide products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper SIDEshrink W60XXXL PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)x1100xH230mm | tunnel size: L2400xW1200xH280mm | machine dimensions: L2400xW1600xH1260mm | power consumption: 380V, 28kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available  ...

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XL (vertical) PRO-version and AMTEC Shrink wrapper SIDEshrink W60XXL PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended also for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW700xH300mm | tunnel size: L1700xW790xH350mm | machine dimensions: L2200xW1400xH1230mm | power consumption: 380V, 21kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample ...

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40L (vertical) PRO-version and AMTEC Shrink Wrapper SIDEshrink W60XL PRO-version. Conveyor speed: 0-30m/min. Adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L(unlimited)xW400xH300mm | tunnel size: L1700xW450xH350mm | machine dimensions: L2200xW1000xH1330mm | power consumption: 380V, 16kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. ...

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40M (vertical) PRO-version, AMTEC Shrink Wrapper FLOWshrink W100-L High speed PRO-Version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW300xH230mm | tunnel size: L1200xW350xH380mm | machine dimensions: L2200xW900xH1160mm | power consumption: 380V, 14kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sampl ...

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W15 4XL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 24kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W940xH250 | machine dimensions (mm): L2800xW1460xH1280 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.