tunnel furnace used for sale

We offer: Chamber furnace, 1 m³ maximum temperature: 1420° Atmosphere: reducing or oxidizing (both can be used) with CO Analyzer Fiber lining in TOP condition. Including cabinets with rod control (can also in a Siemens control system be converted). The plant is in a very good condition. Offer price: Including delivery free House Germany, installation and commissioning.

Shrink Wrap Shrink tunnels

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Demonstration device. Powder coating plant mini - for beginners The spark / ROMER® powder coating plant mini - consists of: SLS-9 small powder furnace (Indoor: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 p Powder hand plant AP 400 Shipping costs will be calculated individually. (also, pickup) Payment conditions: 30% deposit and the balance of 70% with notification of readiness for dispatch.

Wiesheu B4 M Hot air oven with fermentation oven used shop oven Wiesheu for 4 sheets 60x40 cm with exhaust hood. The oven is made with a fermentation cabinet from 2005. The furnace is with fixed water connection for swelling and is movable on wheels. We have a wide selection of shop ovens in the warehouse to visit at any time. You can visit this and theothere ovens. Payment and shipping on request. Wiesheu circulating air oven Type: B4 E2 IS600 for 4 sheets 60x40 sheets with fermentation chamber / built 2005 with IS500 control 2x10 editions for 60x40 sheets Control IS 600 Hood completely stainless steel clad Door stop left Furnace built in 2005 Technical data furnace: 400V - 50Hz - 13A - 8.4 kW Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 95 cm

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

Fully automatic shrink machine for containers BVM 6030 W banding machine About 3000 mm length infeed conveyor- Adding links Shrink tunnel SC 6030 with steel net mesh bracelet band-width 600 mm - clearance of 300 mm heated zone 1000 mm All in very good condition The machine can be visited at any time! Individual prices: Products - 4.800,00 Shrink tunnels - 2800.00 Infeed conveyor - 1.500,00

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Pester Pewo-pack 450SN bundle packer for single and multiple cartons with infeed conveyor (1.5m long), turning wheel and PEWO-therm III 450 E shrink tunnel Infeed width from 82 - 205mm Infeed length from 84.5 - 245 mm Infeed height from 59 - 87 mm Maximum collation width 450 mm Suitable for film types PE, PP & PP stretched, film width from 50 mm up to 450 mm, film thickness from 0.025 to 0.100 mm, roll diameter max. 300 mm, roll core diameter 70/76 mm, connection voltage 3 x 400 V + N + PE / 50-60 Hz, Power consumption 9.0 kW / 14.5 A, operating pressure 5 bar, machine base area approx. 4930 x 1230 mm(LxW), infeed height 900 mm, outfeed height 900-950 mm, machine net weight approx. 1,350 kg, output up to 24 cycles per minute

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Used deck baking oven MIWE, type: Ideal R - In the bakery State baking surface: 18 m² Number of cookers: 5 units Hearth size: 1,800 x 2,000 mm -With gas burners -Oil burner according to customer requirements - computer control - hood with fan - completely assembled the furnace is located in the State of the bakery and is immediately ready for use. Delivery and installation available on request. We like to overtake even the oven for you. Request

Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each)  ...

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Electrically heated furnaces with conveyor belt (for non-explosive substances) TECHNICAL DATA temperature max.: 420°C working temperature: approx. 350°C total power consumption: 60 kVA heating power: 48 kW drive: 0,55 kW air circulators: 2 x 4 kW number of control groups: 2 external dimensions (approx.): length: 8500 mm width: 1800 mm height: 2625 mm useable dimensions: conveyor belt width: 900 mm clear height: 150 mm heated length: approx. 7200 mm

Steel platform with ladder, steel construction, machine platform, steel scaffolding used Manufacturer: EHINGER IMPIANTI Height to platform approx. 4.2 m + 1.1 m railing Pedestal 1.7 x 1.9 m Ladder with back protection Dimensions total approx. 1.7 x 2.7 x 5.3 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Pester PEWO-Pack 450SN collator bundler for cartons, with right angle infeed stacking/collation unit (cartons are collated on their narrow side), max. collation size 270 x 400 x 150 mm (LxWxH), up to 35 bundles per minute. With PEWO-Therm shrink tunnel (tunnel entrance approx. 420 x 150mm) and packing table with cross-pusher.

Food Pack machinery / flow pack machine. The machine is designed for wrapping various products for food industry products or other non-food products in film. Manufacturer: Food Pack Machinery SRL Italy Type: Leonardo 700 Year of production: 2010 Control from the color touch screen panel Max film width 700 mm Dimensions: Length 6160 mm, Width 1390 mm, Height 1860 mm Weight: 600 kg Electricity: 380 v., 50 Hz, 6.4 kW Without need: 6 bar Packaging film: Polyethylene The width of the machine's packaging tunnel can be changed according to the width of the wrapper (film) with a handwheel and a digital display. The height adjustment works the same way. The machine is in good condition and clean.

Biomass Plant, 5 MWel, 50 Hz, yoc 2002, in operation Boiler • Technical data: - Fuel tank capacity: approx. 1 .300 m 3 - Exhaust gas volume 29,000 Nm3/h - Average combustion temperature of 900°C (850 for 2 s.) - Thermal power of the furnace 13 MW - 2 add. Burners 5 MW each - Average calorific value Hu 12,500 kJ/kg - Throughput capacity 3,991 kg/h - Boiler working pressure 41 bar - Superheated steam temperature 420°C - designed amount of steam 14 t/h - Fuels: RDF, wood chips, straw, remains of chipboard, choiceed waste Hours of operation of the entire plant appr. 120,000 hours Steam turbine - TWIN steam turbine KKK, type: CFR 3 / AFA 6 GTA - Generator AvK, type DIG 140 k/4W - Gearbox Renk, type: ELCO W-shape can be inspected in operation this week, - SGS can be ordered for inspection.

Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace

Description Brand GPG TECHNICAS DE PANIFICACION SL Model GFH-60 ID TR296 Status Active Price 1.300 € + VAT Year of manufacture 2009 Fuel Altele Location Oradea (RO) Gas heat generator for baking ovens GPG GFH-60, 2009, designed for STATIC furnaces from the same manufacturer. Heat exchange is based on thermal fluid (Marlotherm SH). Heat output: max. 80,000 kcal / h, fuel: gas, operating mode: automatic, direct monitoring, max. operating pressure: 4 bars, maximum temperature: 3500C, thermal efficiency: 85-90%. Connection type: DN-50 / PN-16 DIN 2633. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 )  ...

Nitrogen tunnel 600 mm wide x 7000 mm long. Excelent condition. New SS belt. 3x 380 V

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Bosch Turbo Scara SR8 Robot + Control IQ200 Manufacturer: Bosch Order No. 3842999836 Serial No.3810198 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg + Control IQ 200 (Changes and errors in the technical data, information reserved!) Panning area see picture Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Deck baking oven W & P, type: Matador MD 101 - In the bakery State - 5 floors - 2 thermal circuits (upper 2 burners and bottom 3 flock) - oil burner weishaupt - 1 stone slab broken but spare available - regular maintenance - last 2016 - in one piece (mounted) -in the bakery condition - condition: good baking surface: 9.6 m2 Hearth size: B T 1.60 x 1.20 m The furnace is located in the bakery. An application is possible in one piece and can be applied on request, like us.

Bosch Turbo Scara SR 800EC robot + control IQ 150 + handheld control unit PHG 2000 Manufacturer: Bosch Order No. 3842506428 Series No. 764840020 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Bosch Scara SR 800 swivel arm robot incl. control Manufacturer: Bosch Maximum load on the gripper flange: 5 kg Stroke 3rd axis 480 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram, incl. complete control consists of Bosch MP 30 control panel + TR12-R + equipped plug-in card module Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 wo ...

Shrink packer film only Gampack type 50 P with shrink tunnel, bottles infeed right Built in 2006, Siemens S7 control, up to 40 cycles per minute, Machine suitable for PET bottles in 3 x 2 packs. Was in production until end of January 2019. Dismantled and stored See video link. Available immediately.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

CP-Citopac FKS-10 CP suppository filling, cooling and sealing line for pre-formed plastic casings, comprising: SFD-10 CP filling machine for pre-formed plastic suppository casings, output up to 10,500 per hour, with 2 filling stations for 0.5 - 3.5ml dosing range. Includes mobile electrically heated and stirred 30 litre product supply vessel. KTE-10 CP continuous cooling tunnel for up to 10,500 per hour, approx. 25 meters cooling length (about 1,450 suppositories) including evaporator with fan. U-shape layout. BST-10 CP sealing machine, for sealing the openings, with cutting and trimming station, coding station, and cutting station for the required count of strips. Designed for suppository casings with a distance of 17.35mm between each casing and a reel height of 45-51mm The line has been fully overhauled mechanically and electronically in 2019 and is as new.

Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Miwe DS control panel for stikken furnaces Control panel for Stikkenofen Miwe static

Kiener Straffbanderolier Auto Skinetta 450 with slinging chain strap and shrink tunnel with bar chain strap and hot air blower sideways and from above. Siemens Control Film width 40-450 mm

with hood including fan with Gaer schrank 4 herds each 60x80cm long ago any stove with stone slab manual control with fixed water connection for each floor separately Each floor with separate swath box Fermentation chamber control manually Each floor with viewing glass Each floor with lighting Connection per stove 4.65 kW 400 Volt 3/N/PE 50 Hz Furnace is mobile on wheels checked and cleaned The furnace is fully assembled ready for loading in stock.

Workpiece diameter: 4300 mm Distance between centers: 0 mm Number of rolls: 0   Field off application of the machine; Tank ends, silo tunnels, fume hoods, rocket and prime mover components, large containers and flanged & profiled parts for tanks, vessels for the chemical and the aircraft industry Max. workpiece:           4000Ø Maximum sheet thickness:  13mm Max. dishing radius:      100mm Min. product Ø:           800Ø Min. plate thickness:     2mm Max height on dishing side:40mm Power:                    20kW Length:                   5.000 mm  Width:                    1.000 mm  Height:      &n ...

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...