tube in tube used for sale

intermediate table GUK ZT 520; cleaned and tested; Working width 520mm; height-adjustable; Speed adjustable; suitable for connection to GUK folding machines. Intermediate transport table GUK ZT 520; cleaned and checked; working width 520mm; adjustable in hight; adjustable in speed; used for GUK folding machines.

Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Caterpillar C7.1 - Unused - 250 HP - G9R

Caterpillar 3412C - Unused - 625 HP - 38S

Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...

FAG measuring instruments: PG-20/E-F, No. 15863 No.256 If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Caterpillar C18 - Unused - 539 HP - TXW

Sell a high-quality, robust liquid ring vacuum pump from the premium manufacturer Siemen & Hinsch (SIHI Sterling) in excellent, visually and technically well-maintained condition. This LEMA 425 model is an absolute workhorse in industrial technology, known for its extreme reliability, durability and ability to convey even wet gases or vapours without any problems. The pump is single-stage and is directly driven by a powerful 11 kW electric motor. Technical data (according to nameplate): • Manufacturer: Siemen & Hinsch mbH (SIHI), Itzehoe Germany • Type: LEMA 425 AZ AA14B0 SB • Pumping speed : 270 m³/h • Speed : 1450 1/min • Suction pressure : 33 mbar • Overpressure : 0 bar • Engine power : 11 kW • Year of construction: 1995 • Pump No.: D-5078023 • Certification: CE marking

Key data: 750 kN, 40 mm

Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

KUKA KR 240 R2900 ultra industrial robot The KUKA KR 240 R2900 ultra is a powerful 6-axis industrial robot from the well-known KR QUANTEC ultra series. It is characterized by a high payload of 240 kg and a maximum reach of 2896 mm. The model has been specially designed for demanding, heavy-duty automation tasks in industry. Technical core data Nominal load capacity: 240 kg Maximum total load: 290 kg Maximum reach: 2896 mm Number of axes: 6 Pose repeatability: ± 0.06mm Net weight: approx. 1145 kg Installation Position: Floor Degree of protection: IP65 (central hand IP67) Control: KUKA KRC4 Movement spectrum of the axes The axes offer a large range of motion for maximum flexibility in the working area: Axis 1 (A1): ± 185° Axis 2 (A2): -140° / -5° Axis 3 (A3): -120° / 155° Axis 4 (A4): ± 350° Axis 5 (A5): ± 122.5° Axis 6 (A6): ± 350° Thanks to i ...

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

KUKA KR 210 L150-2 2000 6-axis robot The KUKA KR 210 L150-2 2000 (2000 series) is a powerful 6-axis industrial robot that has been specially designed for an extended reach with a high payload. The abbreviation "L150" signals the arm extension (long version), which raises the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Main technical data Maximum reach: 3,100 mm Nominal load capacity: 150 kg Additional load (arm/swingarm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Net weight (without steering): approx. 1,285 kg Degree of protection: IP65 (standard) Mounting Position: Floor Axis data (range of motion & speed) The 2000 series is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): + ...

Machine Type: Pulse Arc Inverter Welding Machine Make MERKLE Type HighPULSE 452 DW Plant No.: 93.828 Connection voltage 3 x 400 volts Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 26 Fuse 32 Amps Dimensions L x W x H 1,100 x 490 x 1,000 mm Weight 140 kg Age 10 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer with 2 pressure gauges 1 piece spare parts box complete Equipped 18 months w ...

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 6.5 minutes Capacity: 1800 - 2000 pcs/h Number of vessels: 238 Container capacity: 100 - 1500 gr Dimensions: 1700 x 1700 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 700 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles Dimensions: LxWxH 2.8x1.5x1.8 meters / Weight 3500Kg

grinding diameter: 0/ mm grinding length: 960 mm feed in: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0/ m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Seidenader line for the visual inspection of vials, comprising a Seidenader DT1202 vial/bottle feeding turntable with a diameter of 1200 mm, 1 x 2 units. Seidenader V90-AVSB/30-LR + V90-AVSB/30-RL semi-automatic inspection machines for the visual inspection of cosmetic defects and particles in vials, etc., size range from 0.5 to 1000 ml, throughput of up to 150 objects per minute. The machine is used for the visual inspection of particles, glass defects and gross defects, cracks and hairline cracks. The machines are equipped with TYNDALL light from the top front for cap and glass defects (the light shines from above onto the caps of the containers; for lyophilisates, powders and emulsions, it also shines onto the product) and TYNDALL light from below at the front for non-clear liquids, emulsions, powders and lyophilisates (the light shines diagonally from below onto the base of the conta ...

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

Spiraleindrehmaschine - Spiral insertion machine Renz DPST Year 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

MITSUBISHI RV-70FM-D1-S15 robot was built in 2020 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine has worked a small number of hours and has not been used in production. The MITSUBISHI RV-70FM-D1-S15 is a state-of-the-art industrial robot designed to automate production processes in an industrial environment. With a payload of 70 kg and an arm reach of 2050 mm, it enables efficient operation in CNC machine handling, palletising, assembly and workpiece loading and unloading. All of the 6 axes are equipped with AC servo motors with brakes. This solution, combined with a position detection system based on absolute encoders, ensures high movement dynamics, precision and stable operation even during intensive use. The MITSUBISHI RV-70 robot arm cooperates with the CR760-70VD1-1-S15 controller, which is responsible for precise motion control and enables the expansion of the syst ...

Registerstanze - Index Cutter Hunkeler RE 320 Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chucks -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H65 mm -Total weight: 3.7 kg

Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 82 - 2 ME Baujahr / Year 1999 - Serial-No. 990418402 Arbeitsbreite / Working width max. 820mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Einlaufhöhe / Infeed high min. 400mm - max. 950mm Stream delivery with integrated pressing rollers Beschreibung / Description: Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter ASP 82-2 ME extension to four-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 70/90/H57 mm -Total weight: 1.7 kg