tube in tube used for sale

Reel incl. coil turner is for sale

turning diameter: 500 mm turning length: 1000 mm control: Mazatrol Smooth G number of spindle speeds: 5000 U/min spindle motor: 11/7,5 kW axis stroke (X,Y,Z): 450, 200, 960 mm travel -w axis: 950 mm b-axis: -30 / +210 ° c-axis: 360, 0,0001 ° bar material dia.: 65 mm milling spindle: spindle bore: 76 mm spindle turning speed range: 12000 U/min spindle motor: 7,5 / 5,5 kW tool taper: HSK A 63 rapid travel x/y/z: 40000 mm/min weight of the machine ca.: 9.5 t dimensions of the machine ca.: 3900 x 2600 x 2400 mm equipped with: - CNC control Mazak Smooth G - Main and counter spindle - milling spindle - Y-axis - Tool holder: HSK A 63 - Tool magazine: 72 places - Tool Eye - Mazak monitoring system B (RMP 60) - Coolant and compressed air (1.5 MPA) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 545 mm turning length: 753 mm control: Mazatrol Matrix 2 Main Spindle:: c-axis: 0,0001 ° spindle motor: 11 kW spindle turning speed range: 6000 U/min x-axis: 410 mm z-axis: 805 mm y-axis: 140 mm w-axis: 903 mm b-axis: 225 ° bar material dia.: 61 mm Rapid Travel X / Y / Z-Achse: 30/26/30 m/min 2nd Spindle:: c-axis: 0,0001 ° power capacity: 11 kW spindle turning speed range: 5000 U/min milling spindle: spindle turning speed range: 12000 U/min spindle motor: 5,5 kW total power requirement: 45,6 kVA weight of the machine ca.: 7,7 t dimensions of the machine ca.: 3,1 x 2,495 x 2,5 m 5-axis simultaneous machining - CNC control Mazatrol Matrix 2 - Main & counter spindle - 9-position tool turret - Tool changer (20-fold) - Capto C6 milling spindle - Coolant system IKZ 20bar - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech ...

turning diameter: 658 mm workpiece length - max.: 1519 mm control: Mazatrol Matrix 2 swing diameter: 658 mm clamping range for bar work: 102 mm workpiece weight: 1000 kg ------------ MAIN SPINDLE ------------: turning speeds: 35 - 3300 U/min passage of spindle: 112 mm c-axis: 0,0001 spindle motor: 30/22 kW spindle nose: A2-8 milling spindle: spindle motor: 22 / 15 kW milling head speed: 12000 U/min b-axis: -30 / +210 ° travel -x axis: 615 mm travel -y axis: 260 mm travel -z axis: 1585 mm rapid travel x/y/z: 50 / 40 / 50 m/min 2nd Spindle:: spindle turning speed range: 4000 U/min spindle motor: 26 / 22 kW spindle nose: A2-8 spindle passage: 91 mm w-axis: 1539 mm total power requirement: 108,53 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 5,2 x 2,8 x 2,75 m - CNC control Mazatrol Matrix 2 - Main & counter spindle - Milling spindle (Capto C6) - 36-position tool cha ...

Reference Num.: 4203 Brand: Hewlett Packard Type: Indigo 7500 Construction year: 2011 Impressions: 49 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4204 Brand: Hewlett Packard Type: Indigo 7500 Construction year: 2011 Impressions: 71 mio Available: directly Status: Not in production Location: Deutschland

Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg

Mixing and homogenizing plant 300L, incl. heating and cooling, as good as new, never been in operation

Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines

Second Hand Screw Compressor Ingersoll Rand R37IE-A 37 kW, 7.6 bar at 6.46 m3/min. Built in 2013 with only 18,254 hours

Key data: 50 mm

We offer you a EREMA extruder for sale, which has been fully refurbished in-house. It is an INTAREMA® 605K, the machine is completely mechanically and electrically reconditioned by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please contact us! Tags: EREMA, UMAC, refurbished, pelletizer, extruder, regranulating machine,

4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.

Offer 73066 Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable - separate mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Space requirement para. approx. W 750 x H 1250 x D 750 mm - Weight approx. 180 kg

Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Knoll Chip Conveyor Knoll coolant system with paper belt filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air blowing device on the upper turret Milling spindle synchronized threading ...

For sale is a used HP Multi Jet Fusion 540 3D printer. The HP Jet Fusion 540 is known for its reliability, efficiency, and high-precision results. Its ideal for small to medium production runs and is perfect for prototyping, functional parts, or complex design requirements., The device was purchased for R&D purposes to print prototypes during development. Throughout its lifetime, it was used only lightly—on average, about once a week. The printer is therefore in very good condition., Special features:, • Efficient material utilization: Up to 80% of the material can be reused, reducing printing costs. The machine automatically mixes the old and new materials., ● High precision: Ideal for industrial applications where precision detail and dimensional accuracy are required., ● Easy to use: User-friendly interface and software simplify the workflow., Condition and maintenance:, ● L ...

Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Knoll Chip Conveyor Knoll coolant system with paper belt filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air blowing device on the upper turret Milling spindle synchronized threading ...

Year of construction 2017 Commissioning 06-2017 Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 24 kW (oil-air lubrication) Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Mayfran Consep 2000 II Chip Conveyor, Double Switching Filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air bl ...

Height=1.31 m, Overall length= 0.64 m, Overall width= 1.11 m, Net weight= 178 kg,

Height=1.3 m, Overall length= 2.25 m, Overall width= 1.2 m, Net weight= 1000 kg,

Height=1.1 m, Overall length= 1.5 m, Overall width= 0.9 m, Net weight= 300 kg,

Height=1.33 m, Overall length= 0.8 m, Overall width= 0.73 m, Net weight= 120 kg,

Height=2.27 m, Overall length= 1.9 m, Overall width= 2.25 m, Net weight= 1400 kg,

Height=1.73 m, Overall length= 1.85 m, Overall width= 1.02 m, Net weight= 725 kg,

Height=1.35 m, Overall length= 1.05 m, Overall width= 1.6 m, Net weight= 435 kg,

Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 287 kg,

Mazak Integrex 200 Y, 20 tool positions, x,y,z = 530,140,1065. 30 kW spindle motor, 35-4500 rpm, chuck size 210 mm, through-hole diameter 61 mm, under power

This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset uni ...

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm tool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/min feeds: 0 - 10.000 mm/min quill stroke: 90.0 mm table-size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control: TNC 410 CA spindle: ein ~ 126 Std. engine output: 11.0 kW weight: 1300 kg dimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ...

: 4 St. : 2 St. Plate thickness: 45 mm table length: 2000 mm range L-W-H: 2000 x 700 x 900 mm weight: 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of  ...

plate thickness: 8.0 mm ST plate thickness: 5.0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60.0 l engine output: 4.0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foo ...

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60.0 ltr. table:: 1000 x 800 mm total power requirement: 2.62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mazatrol Matrix Control Max. turning diameter 530 mm Max. machining length 500 mm Max. bar passage 52 mm Travel X/Y/Z 450/200/550 mm Main spindle max. speed 5,000 rpm C-axis Milling spindle max. speed 12,000 rpm B-axis -30°-190°, 1° indexing Capto C6 Tool Holder Tool magazine with 72 tool positions Max. tool diameter 90 mm Max. tool diameter with free secondary positions 125 mm Max. tool length 210 mm Tailstock MK5 Automatic Parts Catcher (D:65 x L:120 x 2.5KG) Automatic Tooleye Conveyor Cooling by the spindle, 70 bar Coolant system with 70 bar high-pressure pump and paper belt filter Milling spindle synchronized threading Rapid traverse stylus angle of inclination during movement Cylinder (G07) + Polar Interpolation (G12.1) Signal lamp 1 pcs Irco Bar Feeder ILS-MUK-7012 -Max. rod length: 1,200 mm 1 pc oil mist extraction

GEA-INTEDAS vertical tank made of AISI 304L stainless steel. On legs. Capacity: 6000l. 4 lower outputs and 1 upper entrance. With aeration valve and top manhole cover. Atmospheric. Design temperature: 90º. Previous use: mains water. Series No.: 10D100. Dimensions: Diameter: 1500mm. Height 5280mm.

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: left. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: right. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

Used 3D printer: HP Jet Fusion 580 – industrial-grade color multijet technology, Immediately available and ready for use. Installation service, commissioning, and training available., For sale is a used HP Jet Fusion 580 3D printer in very good condition. The machine is fully functional, regularly serviced and is ideal for professional applications in prototyping, design, product development and small series production – especially where Color parts with high strength and precision are required., ---------------------------------------------------------------, Highlights of the HP Jet Fusion 580:, - Color 3D printing: Print functional components in Full color (CMYK) – ideal for illustrative prototypes and visualization., - High level of detail: Finest resolution for delicate geometries and complex structures., - Fast printing process: HP Multi Jet Fusion technology for short produc ...

1 of used medium-speed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-M, new 2013. Operating side: left. Used for 500 ml PET bottles in various collations at a maximum speed of 70 cycles per minute (depending on format). Siemens S7 PLC with MI-servo controls. Electrically heated shrinktunnel.

Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.

Used microfiltration made by Intermasz type MF 1137231178 UNT. New 2013. Milk and whey microfiltration installation. Capacity: 10,000 l/h. Filtration area: 13 m³. Weight: 950 kg.

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...

Manufacturer: ELITechGroup Model: InGenius Type of Machine : PCR machine ELITe InGenius® is an easy-to-use sample-to-result solution dedicated to Molecular Diagnostics which integrates extraction, amplification and result interpretation with an unprecedented flexibility and assay menu possibility. ELITe InGenius® processes 1 to 12 samples in parallel and independent tracks. It features a universal extraction process with multiple and independent PCR enabling the laboratories to create and run custom panels of assays on demand. ELITe InGenius® offers laboratories an unlimited menu capability, combining the largest CE-IVD infectious disease menu available on a sample-to-result instrument, with a real open capability. Benefits - Full Automation - Bench-top instrument integrating all the steps of molecular diagnostics: automated nucleic acid extraction, real-time PCR amplification, a ...

Manufacturer: Index Model:MS 25 M Year of Manufacture: 1990 Type of Machine : Lathe, 6 Spindles - Main spindle: 25 mm - Drive: Mechanical - Features & Equipment: - Bar loader (IEMCA) - Pallet changer - Chip conveyor - Driven tools - Additional accessories included Condition: Used, in good working order. Find more here - / Contact us at -

Tool milling machine Manufacturer: INFRATIREA, Type: FUS-32, built in 1988 Specifications: Table 950 x 450 mm Travel X / Y / Z: 500 / 320 / 400 mm Spindle speeds 25 - 2000 rpm with digital display

Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller DDS02.2-W100-BE12-01-FW Indramat Digital AC Servo Controller 100A Cooling Type: Air More items - new and used - can be found in our shop! International shipping costs on request!

1x INDEX ER25 (built in 1974) with milling device (IRCO bar feeder with weight feed) 3x INDEX 25 (model years 1973-76) 4x INDEX C29 (years 1970-81) 3x INDEX DG12 (years 1972-75) 1x INDEX DG20 (built in 1972/73)

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Height=0.96 m, Overall length= 1.2 m, Overall width= 1.2 m, Net weight= 120 kg,