tube in tube used for sale

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Vulcatherm Infra Red Oven 250degC max temp with control ID 320x130x2000mm

Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

Capacity: 150 l/min Motor: 1,5 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

Capacity: Motor: 1,6 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

Code: 0583 Brand: RAVNE Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

Inotec Sausage Cutter WT 97-R,

Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Drive Controller For sale is an Indramat / Bosch Rexroth RAC 3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, functional condition Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power approx. 55 kW Ambient temperature: +5 °C to +45 °C (operating), −30 °C to +85 °C (storage) Max. operating altitude: up to 1000 m above sea level Protection class: IP 10, humidity class "F" according to DIN 40 040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can  ...

20,000 liters tank with thermal insulation not used tanks

Qty. 1 Second-hand Sendzimir rolling mill Mfc.: INNSE Type: ZR-22- 49” Built: 1960’s Strip width: 1270 mm Thickness Entry: 5.0 mm Exit: 0.4 mm Mill motor: 1640 kW, 2200 HP Qty. 2 Reel motors: 932 kW, 1250 HP Rolling speed: 0 – 163/288 m/min. Max. coil dia.: 1574 mm Winder mandrel dia.: 610 mm Coil weight: 21 Tons Max. tension: 300 kN Max. roll separating force: 6000 kN Work rolls dia.: 48-61 mm

DATASHEET – RAMO TN20 CNC LATHE Manufacturer: RAMO Industrie SA Model: TN20 Numerical control: NUM 1060 (Telemechanical) Type: Inclined Bench CNC Lathe Condition: Good general condition, visible machine under power ⚙️ TECHNICAL SPECIFICATIONS Power supply: 3 × 400 V – 50 Hz Current rating: 63 A Control voltage: 110 V ~ Signaling voltage: 110 V ~ Lighting voltage: 220 V ~ Clutch voltage: 24 V = MECHANICAL CAPACITIES (TN20 standard) Turning diameter above the bed: 420 mm Turning diameter above carriage: 250 mm Length between toes: 500 mm Z-axis travel: 500 mm X-axis travel: 200 mm Spindle passage: Ø 40 mm Spindle speed: 30 to 4000 rpm Spindle Cone: Camlock D1-4 Spindle motor power: 7.5 kW Fast feeds: 10 m/min (X and Z axis) Tool Turret: 8 automatic positions DIMENSIONS AND WEIGHT Dimensions (W × D × H): app ...

Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, Scheuch, new -50% Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a manufacturing plant, has always been stored in a dry place, is new and fully functional. Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, new, Venturi nozzle for bag filters Pipe inner diameter 87 mm, Trumpet top outer diameter 125 mm, Flange outer diameter 185 mm, Height 212 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect  ...

Drive control system Weiss, EF1503A, EPZ10201 APPL + Inv 8200, Lenze, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Also suitable for controlling a Weiss rotary indexing table Includes documentation 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

• Designation:Infeed • Type / Model: 3738.0400 • Year of manufacture: 2019 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Power: 11 kW, 50/60 Hz 2930 rpm Connections Tri Clamp Condition very good Dimensions LWH: 1000 x 400 x 900 mm Weight: approx. 150 kg

Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR

MTU 12V396 SE TE94 INTERCOOLER NATO STOCK KODE 2930-12-A07-0048 ORIGINAL PART NUMBER 0030982820 DIDAR MAKINA PART NUMBER 2605710002

Lot of 180 roller bearings stamps, SKF, FAG, INA , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of €3.50 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 90 pieces in original cardboard packaging 2) Approx. 30 pieces in original foil packaging 3) Approx. 60 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this ...

Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good