136,460 used machines on RESALE, but how to find them? Machine Search
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 9 sets -Jaw width: 25 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 65/60/H52 mm -Weight/set: 1.4 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 7 sets -Jaw width: 25 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 80/75/H55 mm -Weight/set: 2.2 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chucks, 4 sets -Jaw width: 26 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 110/80/H67 mm -Weight/set: 4.0 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, 3 sets -Jaw width: 26 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 110/105/H67 mm -Total weight: 5.4 kg/set
This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details.
BINDER KB-53 incubator/refrigerated oven with forced convection 100°C Model: KB53 refrigerated and ventilated Capacity: 53 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 1 shelf Cable routing: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Interior dimensions: 40 x 40 x 33 cm Overall dimensions: 64 x 84 x 58 cm Weight: 72 kg Year of manufacture: 2005 Tested at 37°C and -5°C
BOY 35 E injection molding machine in good condition Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 Tons Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : a laminar flow and carrot peck
Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.
Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table
Inspection system for detecting damaged and soiled bottles., Additional title: Residual liquid, bottom, mouth, sidewall control, Capacity: 32000 bottles/h, Power: 3,6 kW, Voltage: 400 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 2,5 m, Width: 1 m, Height: 2,5 m, Weight: 1700 kg, Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles, Running direction: right-left, Operation / Control: Heuft, Features: residual liquid, bottom, body, mouth, side wall
- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...
Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.
Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch
Horizontal, heatable and insulated stainless steel tank with pressure gauge, safety valve, level indicator, cleaning line and valves., Additional title: horizontal, insulated, for liquid sugar, Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: stainless steel, Position: horizontal, Features: insulation pressure gauge, safety valve, fill level indicator, cleaning pipes, valves
miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector
Labelling machine for neck, body and back labelling of glass bottles., Additional title: neck-, body- and back labeling, Capacity: 40000 Fl/h, Length: 2600 mm, Width: 2800 mm, Height: 2700 mm, Formats: various label tables 0.5L NRW, 0.33L Vichy, 0.33L Euro, Running direction: left -> right, Operation / Control: Simatic OP7-Panel, Krones KES 5, Position: free standing
Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible.
Control unit for checking beer crates for completeness. Also checks the bottle caps, including a conveyor stop in the event of problems., Additional title: with cap detection, Current: 4 A, Voltage: 230 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 0,7 m, Width: 0,74 m, Height: 2,1 m, Running direction: Crosswise, Features: inspection over closure detection, with integrated conveyor stopp
Manufacturer: ARBURG Model: ALLROUNDER 370 C 800-250 Type of machine: Injection molding machine Year of manufacture: January 2005 Weight: 3180 kg Clamping force: 800 kN Operating voltage: 400V, 3-phase, 50Hz Heating: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW with Multilift handling for inserts Find more here - .ucymachines/ Contact us at - sales@ucymachines
It is a used fully automatic KOMA fully automatic proofing machine type SDCC-PW for sale. The fully automatic proofer are available now. The fully automatic proofer is specially designed for separating plates or trays. Key highlights: Plug & Play: Integrated compressor and condenser K-Control Control: Precise control of temperature, humidity and time Temperatures: Adjustable from -20° C to +35° C (for freezing, cooling, resting and proofing) Flexibility: dough pieces can be cooled/frozen for up to three days and are then ready for baking at exactly the desired time Price on request.
Used TMG DV 04 Divider Inserter 2005 The TMG DV 04 Divider Inserter is a highly efficient and reliable machine that was manufactured by TMG in 2005. It is designed to handle a variety of containers, including glass and PET, and has a speed of 35 cases per hour. This makes it an excellent choice for businesses that need to process large volumes of products quickly and accurately. In addition to its impressive processing capabilities, the TMG Divider Inserter also comes equipped with a range of safety features. This to ensure that it can be used safely and efficiently in any production environment. These features, combined with the availability of comprehensive manuals, make this machine easy to use and maintain, even for operators with limited experience. Currently, the TMG Divider Inserter is in production, meaning that it is actively being used to process and package products for busine ...
Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through: – traditional commands (push button panel) – PC hardware (video, keyboard and mouse) Traditional commands In order to allow quick and safe intervention by the operator, the controls have been provided of a traditional type; for example: – machine stop – machine running – etc. PC hardware The machine is equipped with the main hardware elements of the PC, such as: – video – keyboard – mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine, follow the values indicated: – storage temperature: from -10 to 60 ° C – ambient operating temperature from 10 to 45 ° C – temperature inside panels: Power electrical cabinet: – electrical power cabinet temperature: t.MAX.
Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.
Battenfeld Microsystem 50 Injection Moulding Machine 100 % working with no hidden defects
Description Item #8772 – POT FILLING LINE - Line Filling Chocolate Cream/Paste into Pot with Toy Currently producing 18gramme Pots. including: MONDINI Model A/C Tray/Pot Denesting System, LIVETECH Automatic System to insert spoon into pot, Model LSS, with PESCE GROUP MP10 Product Hopper & Elevator Feeder, SARG STM087 Automatic Toy Insertion Machine, to place toy into pot/tray. MONDINI Model VF/SPE Cream/Paste Dosing Unit into the pots MONDINI Model C/T Pot/Tray Lid Thermosealing Unit CICRESPI Model 1602056 Ink Jet Coding Unit LIVETECH Model LSS/LA19947 X-Ray Inspection machine End of Line Belts for packing. line will include the Mould for the Pot/Tray and the Mould for the Spoon
Overview The crate control was built in 2012 by the German manufacturer Syscona. The percentage of foreign bottles at which the crate is rejected can be set. Technical details Capacity: 3,800 crates/h Longitudinal run Previously used formats: 12x 1L PET bottles Inspection via camera Including pre-belt and line distributor 230V/ 50Hz
Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate.
Overview This fill level inspection machine was manufactured in 2017 and the label inspection machine in 2015 by German company Vision-Tec. The pusher was made by German company BBULL. It is designed for checking the fill height, closure and label of full bottles. The machine is until October 2025 in running production. Technical data Capacity: Adjustable Scope of Delivery Fill level inspection system | Vision Tec | 2017 Label inspection system | Vision Tec | 2015 Reject system | BBULL
Pick and place investor Sigma; good condition; serviced and inspected by after-sales service; Format max.200x150mm, min.50x50mm; Material thickness 0.1-6mm; Speed up to 15000 hours; Encoders; Compressor. Pick and place feeder Sigma; good condition; checked by the support of Sigma; size max.200x150mm, min.50x50mm; Thikness 0.1-6mm; speed up to 15.000/h; rotary encoder; compressor.
Used injection molding machine HyPET 120 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights.Manufacturer: HuskyModel: HyPET120 P85/95 E85Year of manufacture: 2009Clamping force: 120 tonsCavities: 32Hot runner system: Husky 32-cavity hot runner, common across supplied moldsNeck finishes: 29/25 mm primary; additional parts for 30/25 mmPreform weight ...
for medium frequency of use in offices 3,500 inserts per hour, depending on the application EMC Certification FCC Certification CB Certification UL Listed test mark according to UL-IEC 60950, file according to According to NEN-EN-IEC 60950 and derivatives
Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12 color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details.
Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic Sys ...
used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.
Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details.
Manufacturer: Krones Model / Type: Linatronic 735 M2 Type of Machine: Empty bottle inspector Year of Manufacture: 2007 CAPACITY - Capacity: 39,600 bottles per hour ADDITIONAL EQUIPMENT - Glideliner, Akkutable, and some conveyor belts may be available Find more here - .ucymachines/ Contact us at - sales@ucymachines
SACMI rotary compression molding machine. Equiped with 64 cavities and mold for 37mm caps.
Cat No.: 26-0064 Features Volume 1000 L Material No. V2A Exterior Surface IIID Surface inside IIID Total height 1845 mm Cylinder height 1250 mm Diameter 1130 mm Weight 184 kg Description Topsoil: Clapper bottom Threaded Socket DN50 Manhole CIP Connector Airlock connection DN50 Cylinder: Cooling jacket Insulation Level indicator Sample tap DN25 Dip Shaft Sleeve for Thermometer Underbody: Forward-drawn residual drain pipe with disc valve DN50 4 feet
Description Device Type: Automatic Filter Integrity Tester Item number: CS 001 Serial Number: 17076418 Supply voltage 12–24 V DC Country of manufacture: Germany Product Description The Palltronic® Compact Star is a fully automatic, portable integrity test device for membrane filters. The device enables fast, reliable and non-destructive verification of filter integrity by means of pressure maintenance methods. By automatically performing and evaluating the tests, it supports quality assurance in the food, beverage and process industries.
Used Bag in Box Filling Line (Manual Operation.) Filling volume 5-20ltr. Pre-made bags with sealing plugs Manual bag feeding, automatic removal of the sealing plug and re-insertion after filling. Capacity: 400-500 Bags/ shift (8 h) Year of construction. 2013, out of service since May 2025 Included: - Syrup tank 6,000 ltr. - CIP preparation - Hot glue auton ́mat with glue guns - Ink-jet encoder - Various pipelines, valves, conveyor belts and platforms. Disassembly by the buyer.
A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible.
Key data: 4200 kN, 527 g/PS, 70 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: KRAUSS MAFFEI Type: KM420-1900C2 Year of Make: 2006 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 70 mm Max. displacement: 1,047 cm³ Moulded part weight: 853 g/hp Control: MC5 Equipment: 2 pcs core train Robot SEPRO, type: SR4030 S3 VISUAL 12-way hot zone channel control Interface temperature control unit
B&A REF: 9228 TON: 320 SCREW DIAMETER: 70MM SHOT WEIGHT: 1266 STROKE VOLUME: 1346CM3 INJECTION PRESSURE: 1660AR PLATEN SIZES: 990 X 990MM DBTB: 680 X 680MM MIN MOULD HEIGHT: 260MM MAX MOULD HEIGHT: 680MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 1330MM EJECTOR STROKE: 180MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 45 HEATING CAPACITY: 18.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Key data: 8000 kN, 90 mm
ENGEL DUO 5550/800 – 800 T Year: 2006 Operating hours: 20,600 h Clamping force: 800 t Screw diameter: 90 mm Distance between tiebars: 1,170 × 1,000 mm Opening stroke: 1,600 mm Mold height (min./max.): 500 / 1,100 mm Injection volume: 2,740 cm³ Injection pressure: 2,180 bar Options: Bi-metallic screw 2 hydraulic core pulls Robot interface Overhaul performed by ENGEL New pump
KRAUSS MAFFEI 150 T type 150-520 C2 Force de fermeture : 150 T Année : 2003 31000 heures de fonctionnement Diamètre vis : 40 mm + 1 ensemble vis fourreau 50 mm Volume injectable : 217 cm3 / 340 cm3 Pression d’injection : 2377 bars Distance entre colonnes : 500 x 560 mm Dimensions des plateaux : 780 x 840 mm Epaisseur mini moule : 300 mm Course d'ouverture : 600 mm Interface euromap Noyaux hydrauliques Poids : 6 400 kg
Key data: 10000 , 110
DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2003 Type: 1000/1400 - 8000 NC4 Clamping Force: 1000 T Screw Diameter: 110 mm Theoretical Injection Volume: 4372 cm³ Injection weight. : 3930 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Oil Capacity: 1300 L Dimensions: 11,90 x 3,20 x 2,90 m Weight: 63 tons
Key data: 3500 kN, 65 mm
Manufacturer: Woojin Selex Model: TH 350S Condition: Used Stock number: 9348 Hours: 62800 h Clamping force: 350 t Screw diameter: 65 mm Injection capacity: 863 cc Injection speed: 102 mm/s Equipment: Robotic arm GIGA-10/20
maximum number of results exceeded
please refine your search
