137,847 used machines on RESALE, but how to find them? Machine Search
Used, untested. Including additional tools. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-3
Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-50084-161
Electric profile roller with - 5 set of rolls 2x for round material 20mm and 30mm, 1x for flat material 1x for square material - Foot switch with emergency stop Round material 30 x 1 mm Square material 30 x 30 x 1 mm Round material solid 16 mm Square material solid 30 x 10 mm Speeds: 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Dimensions approx. 0.82 x 0.60 x 1.26 m Condition: never used / new (5) Auction-ID: A7-50084-61
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Digital display - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Angle steel 20 x 20 x 4 mm Flat steel 25 x 6 mm Axle diameter 20 mm Working speed 11 rpm Total power requirement 0.2 kW Machine weight approx. 80 kg Space requirements approx. 0.6 x 0.6 x 1.5 m Auction-ID: A7-50084-77
Sheet metal bending machine 3 rollers - 2 driven rollers - Footswitch - Emergency stop facility Sheet width 2100 mm Sheet thickness 2.0 mm Stand width 2150 mm Roller diameter 90 mm Total power requirement 1.5 KW Machine weight approx. 0.7 t Space requirement approx. 2.5 x 0.7 x 1.3 mm Auction-ID: A7-50084-84
Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50084-203
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven Round material solid 35 mm Square material solid 35 mm Gross diameter max. 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Axle diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Dimensions approx. 0.9 x 0.95 x 1.4 m Condition: never used / new (5) Auction-ID: A7-50084-133
Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-50084-206
Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5) Auction-ID: A7-50084-191
Electric profile roller - Choice of horizontal or vertical work - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1\" - Instruction manual - Footswitch left/right and EMERGENCY STOP Round material solid 30 / 900 mm Square material solid 30 / 900 mm Angle steel 35X35X5 / 600 mm T - Steel - Bridge to the outside 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roll diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Condition: never used / new (5) Auction-ID: A7-50084-50
Mobile base, External control panel, Control panel Auction-ID: A1-50085-6
Flat steel bending machine The following bending tools are included: 1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" Bending tools diameter 1\" to 3\" mm Wall thickness max. 16 mm Machine weight approx. 26 kg Package size max. 0.6 x 0.3 x 0.3 m Condition: never used / new (5) Auction-ID: A7-50084-171
Used, untested. Documentation and instruction manual available. Equipped with automatic stop. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-12
Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out upper roller - Safety device emergency exit line - Documentation - 400V Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Top roller diameter 95 mm Total power requirement 1.1 KW Machine weight approx. 0.37 t Dimensions approx. 0.95 x 0.76 x 1.25 mm Auction-ID: A7-50084-68
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Mount: Shaft 50mm - With digital display - Hardened special steel shafts - 1 set of standard rollers - 2 driven rollers - Top roller can be hydraulically fed up and down - Horizontal and vertical operation - Motor with brake device Round material solid 35 (600) mm Square material solid 35 (900) mm Angle steel 50 x 50 x 5 (800) mm T - Steel - Bridge Outside 60 x 7 (600) mm Axle diameter 50 mm Working speed 4.5 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.1 x 0.8 x 1.5 m Condition: never used / new (5) Auction-ID: A7-50084-29
Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41
Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection -Max. working width: 2500 mm -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg
Incl. foot switch and the bending tool located on the machine. • hydraulic oil volume: 120 l
Additional technical specifications: • Walzendurchmesser jeweils: 100 mm
Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg
Sheet metal bending machine 3 rollers - 2 driven rollers - Emergency stop facility Sheet width 2040 mm Sheet thickness 6.0 mm Stand width 2100 mm Roller diameter - top 180 mm Roller diameter - bottom 160 mm Total power requirement KW Machine weight approx. 2.4 t Dimensions approx. 3.5 x 0.85 x 1.75 mm Auction-ID: A7-50084-92
Folding machine - Manual back gauge max. 830mm - Bending angle preselection via limit switch Sheet width 2000 mm Sheet thickness 3.5 mm Stand width 2050 mm Opening width 355 mm Total power requirement kW Machine weight approx. 2.8 t Space requirement approx. 3.5 x 1.5 x 1.5 m Auction-ID: A7-50084-90
Pressure approx. 10 t Stroke 380 mm Table size 800 x 700 mm Total power requirement 4.0 kW Cylinder diameter 90 mm Weight 2.5 t Dimensions 2.2 x 1.4 x 1.6 mm Auction-ID: A7-50084-222
pressure: 135 t chamfer lenght: 3600 mm distance between columns: 3150 mm stroke of upper beam: 200 mm ajustment speed: 70.0 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec : 315 bar dayligth: 400 mm table height: 915 mm column arm: 250 mm engine output: 15.0 kW weight: 8800 kg range L-W-H: 4200 x 1700 x 2600 mm Equipment: - Electro-hydraulic press brake with torsion bar - HACO NC control (Model ATL 550) for X and Y axes Computer-controlled multi-axis NC press Backgauge position pre-selection (electric backgauge) Backgauge retraction for Z-bends Bending depth pre-selection Electric depth adjustment Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized gooseneck (swan-neck) upper tools - 1x rotatable MULTI-V die block - Re ...
sheet width: 2050 mm plate thickness: 8.0 mm pre-bending capacity: 6.0 mm upper roll diameter: 190 mm lower roll diameter: 180 mm bending speed: 5.2 m/min work height max.: ca. 980 mm total power requirement: 5.5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital position display of the ...
pressure: 10 t stroke: 380 mm table-size: 800 x 700 mm working speed:: mm/ sec. return speed: mm/sec work height max.: mm total power requirement: 4,0 kW : 90 mm weight: 2,5 t dimensions: 2,2 x 1,4 x 1,6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 48 mm bending radius max.: 90 ° total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3, 42.4, 33.7, 1/2 - mandrel length: 4500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: gebraucht : 2015 : 080242 : prompt, Zwischenverkauf v : Türkei : 38900 € : 175 to : 3050 mm : 4 : 265 mm : 2600 mm : 410 mm : hydraulisch : 120 mm/s : 10 mm/s : 100 mm/s : 18.5 kW : 4250 mm : 1850 mm : 2770 mm : 10520 kg 4 axes (Y1, Y2, X, and R-axis) Cybelec DNC 880 S CNC control - 2D graphic display - User-friendly conversational programming - Automatic bending sequence calculation - Automatic calculation of developed length for blank cutting - Product and tool memory - Correction capability - USB ports for backup and program storage CNC-controlled backgauge on linear guide and ball screws Backgauge finger blocks on linear guide CNC-controlled crowning New upper tool 1010/A/75°/0.8/105, sectional and gooseneck New lower tool 2009/85° (V = 16, 22, 35, and 50 mm), sectional Fiessler AKAS laser safety device mounted on the upper beam 2 sheet support arms on linear guides Foot pedal ...
GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.
tube diameter: 50 mm bending angle max. +/-: 180 ° bending radius max.: 350 mm bending speed: 3 U/min motor speeds:: 2815 U/min bending radius max.: 350 mm bending angle max. +/-: 180 ° tool taper: Sechskant 40 mm total power requirement: 2,2 kW weight of the machine ca.: 0,1 t Machine Type Electric Bending Machine Model 6000-S Power Connection 3-phase 400 V Control System JUTEC electronic, programmable bending control with display and membrane keypad Operation Foot switch for clockwise/counterclockwise rotation and bending operation Design Mobile machine on swivel casters The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: ca. 60 mm tool taper: Sechskant 40 mm bending device: horizontal bending speed: 3 U/min weight of the machine ca.: 120 kg total power requirement: 2,2 kW Electronic bend angle control Digital display and keypad Operated via dual foot switches Mandrel-less bending Mobile machine base Pipe diameter range likely up to Ø 60 mm Tool mounting via hexagonal shank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 9 mm pre-bending: 6 mm diameter of upper rolls: 220 mm diameter of lower rolls: 200 mm side roll diameter: 170 mm min. dia.: 250 mm roll speed: 6 m/min total power requirement: 10,3 kW weight of the machine ca.: 4651 kg dimensions of the machine ca.: 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics ...
Control Conventional Drive Hydraulic Power [kW] 2.2 Max. sheet thickness [mm] 2 Max. working width [mm] 6020 Max. opening [mm] 150 Max. bending angle [°] 135 Options Long press brake Auction-ID: A1-40982-5
Control Conventional Drive Hydraulic Number of rolls [pcs.] 3 Number of driven rollers [pcs.] 3 Shaft diameter [mm] 75 Diameter upper roller [mm] 225 Capacity diameter round [mm] 60 Auction-ID: A1-40982-35
On metal column With round steel handle length approx. 147 cm Auction-ID: A1-50251-200
: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...
sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working length: 1270 mm Roller Ø: 120 mm Max. sheet thickness: 4.5 mm Sheet thickness at bending: 4 mm electr. Connection: 400 V, 2.2 kW Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm
brewing length: 2050 mm; size L: 2750 mm; size W: 950 mm; dimension H: 1500 mm; Auction-ID: A1-50090-230
Hand bending machine flat bar max. 16 mm square steel 16 mm round steel 16 mm Weight 45 Kg bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50523-892
Hand bending machine flat bar 30 x 8 mm square steel 12 mm round steel 15 mm Weight 0.025 t Pack size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-50523-881
Flat bar bending machine Flat steel 100 x 5 mm Square steel 16 x 16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 Kg Auction-ID: A7-50523-869
plate width: 370 mm plate thickness: 3 mm no. of straightening rolls: 12 roll diameter: 62 mm Roller diameter 60 mm Workable strip thickness from 0.6 to 3.00 mm Roller configuration: 2+9+2 tempered and ground Double input and output drive rollers pressed by 2+2 pneumatic cylinders Infeed and outfeed belt guide with 4 self-centering rollers Hydraulic opening of the head for pilot release. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Description Fully automated robotic press brake bending cell manufactured by AMADA , model ASTRO II 100 NT / HDS 1030 . Designed for automated sheet-metal bending with robotic workpiece loading, positioning, manipulation and unloading. The system combines an AMADA HDS 1030 press brake with the ASTRO 100 NT robotic handling system. Technical Details Manufacturer: AMADA Model: ASTRO II 100 NT / HDS 1030 Machine type: Robotic press brake bending cell Year: 2007 Serial number: 20306066 Press capacity: 100 t / approx. 980 kN Bending length: Approx. 3,000–3,110 mm Distance between uprights: 2,700 mm Stroke: 200 mm Throat depth: 415 mm Control: AMADA AMNC PC / AMNC II generation Robot: Yaskawa Motoman YR-HP20-A63 / ASTRO 100 NT system Robot payload: 20 kg Robot manufacture: November 2007 Automatic workpiece loading and handling Automatic multi-stage bending Automa ...
Key data: 130 t, 3000 mm
Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.
maximum number of results exceeded
please refine your search
2.250 € 
