trowal used for sale

Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

0: 415 l 0: 280 mm weight of the machine ca.: 1,5 t total power requirement: kW dimensions of the machine ca.: m charge load: : for excavate machine without flywheel drive motor and frequenzy regulator gross working tank volume: 600 liters useful volume: 415 liters largest possible workpiece dimension (measured diagonally): 280mm total weight: 1140kg drive power at 1500 rpm: 4kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

: 1250 mm tank diameter / tank height: 1000 / 350 mm turning speed range: 920 / 1415 U/min voltage: 380 V volumn: 125 Liter power requirement: 1,9 kW weight of the machine ca.: 600 kg dimensions: 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

: 1500 mm tank diameter / tank height: 1500 / 500 mm turning speed range: 1500 U/min voltage: 380 V power requirement: 18 kW volumn: 300 Liter weight of the machine ca.: 1,2 t dimensions: 1,5 x 1,6 x 1,6 m Vibration dryer See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible.

Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg

A Walther Trowal mass finishing system is available. 1) Walther Trowal G 100-C vibration dryer, year of manufacture: 2001, usable volume: 70l, max. heating capacity: 3kW, max. workpiece diagonal: 160mm, bowl diameter: 980mm, discharge height range: 730mm-1030mm, feed height range: 765mm-1065mm, top edge of work bowl height range: 885mm-1185mm. 2) Walther Trowal CD 110 circular vibratory finisher, year of manufacture: 2001, gross volume: 110l, usable volume: 73l, max. workpiece diagonal: 160mm, screen area: 1632cm², speed: 1000rpm, max. centrifugal force: 17540N, weight: 450kg. Including various finishing media. Documentation available. An on-site inspection is possible.

charge load: . Diameter: . mm Diameter: Bechälter 1400 mm volt: 400 V ampere: 9 A KA NR.:: 23126958/393194 face:: 2CM5.0040/51.002.018 output: 50 Hz Operating hours: 26065 h The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: . Diameter: . mm Diameter: . mm volt: 400 V ampere: 9 A KA NR.:: 23141991/395526 face:: 2CM5.0040/51.002.018 output: 50 Hz Number of working hours: 27076 h The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CD 300 ist ein Vibrator (Barrel-polishing machine / Vibrating) ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Außendurchmesser 1305 mm, Volumen 350 l (Nutzvolumen 170 l), maximaler Werkstückdurchmesser 220 mm, Längen ab 220 mm; Drehzahlen 1000–1500 t/min. Anschluss 50 Hz 3x 400 Volt, Antriebsleistung 2.6 kW, Maschinengewicht ca. 730 kg, Abmessungen L2600×B1415×H1305 mm. Zubehör: Satz Gleitschliffsteine. Erreicht enge Toleranzen; typische Anwendungen: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Trowalization system 2-fold Connection 400V (Opening see sketch)

Trowalisier diameter: 1200 mm Reference: Lebendigig - Lot 40 Auction-ID: A7-49056-219

Trowalisier diameter: 1000 mm Operating voltage: 380 V Frequency: 50 Hz Reference: Living - Lot 42 Auction-ID: A7-49056-220