trough used for sale

This 3-Axis vertical machine centre was manufactured in 2008. With travels of X1300-Y650-Z600 mm, and a 24-station tool magazine, it ensures efficient machining operations. Equipped with a CNC FANUC 18i-MB system and an electronic handwheel, precision is at the forefront. The 20-bar high-pressure hole trough spindle coolant and spindle cooler enhance performance. With visible operation under power and a set of 70 ER & Weldon collet holders included. Consider this WELE AA1365 machine for versatile machining capabilities. Contact us for further information.

General SKU423U1343 LocationBarneveld MakeLödige TypeFKM1600 D No.13879 Year of construction1996 Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor34 KW Specified Features - Powder turbo mixer Lödige mixercheck T-arms8x Capacity1600 ltr. Useful capacity400-1200 ltr. Trough sizesDia. 1100x1600 mm InletDia. 250 mm Inspection hatch2x Outlet300x250 mm With jacketcheck Volume 100 ltr Max. temperature110°C Glands air purgedcheck Motor25 kW, 400 V / 730 rpm, 34 kW, 690 V /1470 rpm Speed mixing shaft56/113 rpm With lump breaker2x Motor409/690 volt, 5.5 kW Speed lumpbreaker2900 rpm MaterialStainless steel 1.4552 Information Mounted on framecheck Total height1,70 m Weight3000 kg Floorspace4,0x1,6 mNew arrivalsPowder turbo mixersLoedigeNew arrivalsMixers > Powder turbo mixersBrand > Loedige What you can expect f ...

General SKU391U1098 LocationBarneveld MakeAlexanderwerk TypeTHU9301 No.308797 Main Features Motor1.1 KW Inlet diameter50 mm Width70 mm Specified Features - Granulator Roll granulatorcheck Roll sizesDia. 70x150 mm Ring diecheck Die sizesDia 70 mm x 150 mm(80 mm perforated) Number of dies available:6 Die perforationDia. 1 mm: 1,5 mm: 2,0 mm: 2,5 mm: 3,0 mm: 3,5 mm Number of press rolls1 Motor1.1 kW (1400 rpm, Exc) With variable speed drivecheck (Freq. controller) With pre-mixercheck Trough sizes25 l With hoppercheck Inlet50 x 70 mm OutletDia. 70 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace0,7 x 1,2 m Total height1,5 m Weight200 kg ATEX compatiblecheckNew arrivalsGranulatorsAlexanderwerkNew arrivalsCompactors > GranulatorsBran ...

General SKU243P345 LocationBarneveld Makeunknown manufacturer plate is missing Year of construction1995 Main Features MaterialStainless steel Volume3000 Ltr. Motor30 KW Specified Features - Ribbon blender Ribbon blendercheck Capacity± 3000 Ltr. Trough sizes1400x2000 mm Inlet2000x520 mm Interrupted ribboncheck With adjustable packing glandscheck Motor30 Kw 400/690 Speed mixing shaft19 rpm MaterialStainless steel Information Floor space3,2x1,9 M Total height2,5 MRibbon blenders-Mixers > Ribbon blendersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU231U211 LocationBarneveld MakeInterplast TypeMEX No.0151 Year of construction1992 Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck Double shaftSingle CapacityCa. 750 ltr Trough sizes1400x900mm With covercheck with funel Inlet600x600 mm Outlet200 mm Motor15 kW, 380 volt, 1455/125 rpm Speed mixing shaft25 rpm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck (mild steel) Total height2,56 mtr Weight1500 kg Floor space1,96x1,13 mtr Extra SpecificationsAx Dia 25mmRibbon blenders-Mixers > Ribbon blendersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...

General SKU055E203 LocationBarneveld MakeMoritz S.A. Chatou TypeTSI-1000 Pharma No.852 145B Year of construction1982 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor55 KW Specified Features - Paddle dryer Paddle dryercheck Turbo Sphere Dryer Capacitynetto 1000 Ltr. (bruto 1250 Ltr) Trough sizesDia. 1350mm ManholeDia. 750mm OutletDia. 200mm With jacketcheck 110Ltr. Motor55,0 KW, 380 Volt, Hydraulic driven With variable speed drivecheck Speed mixing shaft± 0-125 Rpm With lump breakercheck Motor9,0 KW, 220/380 Volt With vacuum pumpmake SIHI Motor7,5 KW, 220/380 Volt MaterialStainless steel 1.4404 (316L) Information Mounted on framecheck With switchgearcheck (as is) Floorspace2,9x2,2 m Total height3,1 mMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemi ...

General SKU244U284 LocationBarneveld MakeUnknown ( missing type plate) TypeUnknown Year of constructionunknown Main Features Length2590 mm Inlet diameter160 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter150 mm Length2590 mm Between inlet and outlet2190 mm Shaft diameter162 mm Pitch55mm and 235mm Inlet250x160 mm Outlet160x160 mm With jacketcheck Insulatedcheck Without motorcheck With coverscheck Information Floorspace2,85x0,41 m Total height0,40 m Weight200 kg Extra Specificationslid is fitted with spray tube/drip tube. Horizontal screw conveyors-Conveying systems > Horizontal screw conveyorsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...

A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer.

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...

Centrifugal grinding machine / sliding grinding machine for deburring, rounding, polishing of factory troughs. Machines with 18, 60 or 160 litre capacity. Machines incl. dosing pump, speed control and control cabinet - separian unit optional. Detailed offer on request;; New

Baguette tray 780x580 mm 7 longitudinal troughs NEW(5 pieces )Made of aluminium 1.15 mmExternal dimensions : W.: 780 mm, D.: 580 mm, H.: 40 mm For details see picture

Baguette tray 600x400 mm 5 longitudinal troughs NEW(5 pieces)Made of aluminium 1.15 mm with round cornersSilicone coatedExternal dimensions : W.: 600 mm, D.: 400 mm, H.: 35 mm For details see picture

Baguette tray 600x400 mm 5 longitudinal troughs NEWAus aluminium 1.15 mm with round cornersExternal dimensions : L.: 600 mm, D.: 400 mm, H.: 35 mm For details see picture

Baguette tray 780x580 mm 7 longitudinal troughs NEWAus aluminium 1.15 mm with round cornersExternal dimensions : W.: 780 mm, D.: 580 mm, H.: 35 mm See picture for details

Baguette tray 600x400 mm 5 longitudinal troughs NEW(5 pieces)Made of aluminium 1.15 mmExternal dimensions : W.: 600 mm, D.: 400 mm, H.: 40 mm For details see picture

Baguette tray 780x580 mm 8 longitudinal troughs NEW! Made of aluminiumExternal dimensions : W.: 780 mm, D.: 580 mm, H.: 40 mm See picture for details

Untha RS 100 HD four-shaft shredder. Very good condition. Cutting unit new! With control cabinet and insertion troughs. Drive power 2 x 55 kW. With new 30 mm perforated screen!

Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.

Size: 240 x 350 mm Equipments: length 115 cm power consumption 230 V, 50 Hz Height: Variable from 90 - 116 cm max. pass-trought width 24 cm width 50 cm Compatible with all 36 x 52 printing machines, regardless of the feeder system (stream feeder / single sheet feeder) Short set-up time, efficient use from 1000 envelopes serial no 20391212

Machine Details Stock-No. 1105-03850 Type of machine Machining Center - Vertical Make FEELER Type FV 1500 Year of manufacture 2000 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Price Technical details X-Travel 1500 mm Y-Travel 750 mm Z-Travel 750 mm tool taper BT 50 spindle drive 15 kW spindle turning speed range 6000 rpm tool change unit 32-speed BT 50 tool changing time 4 sec table-size 1700 x 750 mm table load capacity - central/maximum 1500 kp Rapid Travel X/Y/Z 24 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 40 kVA Weight of the machine approx. 11 t Additional information CNC control HEIDENHAIN TNC 426 A.T.C. for 30 tools BT 50 COOLING TROUGHT THE SPINDLE 20 BARS TABLE 1700 X 750 15 KW 6000 RPM

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

Machine Details Stock-No. 1105-03852 Type of machine milling machining centers - vertical Make DAH LIH SONGS Type LIEDER MCV 2600 Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis free loaded on truck, ex works Price Technical details X-Travel 2600 mm Y-Travel 870 mm Z-Travel 760 mm table surface area 2800 x 970 mm control HEIDENHAIN TNC 530 spindle turning speed range 12000 rpm spindle drive 15 kW tool adaptor BT 40 Internal Coolant System Feed 20 bar Feed 10 m/min Rapid Traverse 20/20/30 m/min total power requirement 25 kW Additional information used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - Spindle Oil Cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDLE 20 BAR ...

Machine Details Stock-No. 1105-03865 Type of machine Machining Center - Vertical Make FEELER Type FV 1000 Year of manufacture 1999 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1000 mm Y-Travel 500 mm Z-Travel 500 mm tool taper BT 40 spindle drive 7.5 kW spindle turning speed range 60 - 6000 rpm tool change unit 22-speed BT 40 tool changing time 4 sec table-size 1200 x 500 mm table load capacity - central/maximum 800 kp Rapid Travel X/Y/Z 48 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 18 kVA Weight of the machine approx. 5 t Additional information CNC control FANUC OM complete covering, A.T.C. for 22 tools BT 40 COOLING TROUGHT SPINDLE

Machine Details Stock-No. 1105-03866 Type of machine Machining Center - Vertical Make MAZAK Type VCS 530 C Year of manufacture 2016 Type of control CNC Storage location HAGUENAU FRANCE Country of origin JAPAN Delivery time immediately Freight basis EX WORKS Technical details x-travel 1050 mm Y-Travel 530 mm Z-Travel 510 mm control Mazatrol MATRIX Table dimensions 550 x 1300 mm distance spindle nose and table 180 - 690 mm distance spindle center to column: 610 mm table load 1200 kg Rapid Travel X/Y/Z 42 m/min feed range 1 - 8000 mm/min turning speed range: 40 - 12000 min-1 spindle taper CAT 40 tool magazine: 30 seats Tool diameter 80 mm Workpiece weight max. 8 kg tool length - max. 350 mm connected load 40 kVA voltage 400 / 50 V / Hz Additional information VERY NICE MACHINE WITH CONVOYER WITH CONTROL MAZAK MATRIX COOLING TROUGHT THE SPINDLE

achine-Details Stock-No. 1105-03801 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DNM 5700 Year of manufacture 2021 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 570 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min Weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 12000 kW turning speed range 8000 1/min tool taper BT 40 table surface area 1200 x 500 mm groove width 18 mm Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12000rpm spindle) SIEMENS 828D CONTROL LIKE NEW ONL ...

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 840 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 8000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 (15 min) kW tool change unit: 30 Pos. voltage: 380 V total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - CNC Control Siemens 840D - INTERFACE FOR 4 AXIS+ 4 AXIS NIKKEN - HP COOLING TROUGHT THE SPINDEL 20bar - CHIP CONVOYER The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-03904 Type of machine Machining Center - Vertical Make MAZAK Type VCS 530 C II Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EX WORKS Technical details X-Travel 1740 mm Y-Travel 530 mm Z-Travel 510 mm control MATRIX 2 Table dimensions 2 350 X 500 mm distance spindle nose and table 180 - 690 mm distance spindle center to column: 610 mm table load 1200 kg Rapid Travel X/Y/Z 42 m/min feed range 1 - 8000 mm/min turning speed range: 40 - 12000 min-1 spindle taper CAT 40 tool magazine: 30 seats Tool diameter 80 mm Workpiece weight max. 8 kg tool length - max. 350 mm connected load 40 kVA voltage 400 / 50 V / Hz Additional information VERY NICE MACHINE WITH CONVOYER WITH CONTROL MAZAK MATRIX 2 COOLING TROUGHT THE SPINDLE

Used tubular centrifuge Technical specification: Bowl – inner diameter 114 mm Speed 18000 obr/min Volume 7 L Solid holding volume 3-4 L G force 17000 G Diameter of nozzle 3, 7, 8 mm Max troughput based on water 1300 L/h Feeding pressure >0.05 MPa Motor power 3 kW, 380V 50HZ 3 phase Speed 2845 obr/min Weight 480 kg Size (LWH) 6009001600 mm All contact parts with AISI 316L Open type Explosion-proof motor VFD Control cabinet Rotation speed can be adjusted Feeding pump Frame covered by stainless steel AISI 304

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03920 Type of machine Machining Center - Vertical Make MORI SEIKI Type NV 5000 B / 40 Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time on request Freight basis ex location Technical details x-travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm Control FANUC MSG 501 turning speeds 12000 rpm tool change unit 30 table-size 1100x600 mm Drive 18,5/11 kW tool taper BT 40 transmission ratio 1 spindle diameter in front bearing 65 mm table load 1000 kg T-slots 6x18x100 mm distance spindle /table 150-660 mm max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool weight 8.0 kg Change-time tool to tool approx. 1.0 sec Change-time chip to chip approx. 2.6 sec Rapid Traverse 42 m/min feed speeds 1-6000 mm/min total power requirement 48 kVA Weight of the mac ...

Key data: 500 mm, 250 mm, 400 mm

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Baguette tray 600x400 mm 8 transverse troughs NEW(5 pieces )Made of aluminium 1.15 mmExternal dimensions : W.: 600 mm , D.: 400 mm , H.: 40 mm For details see picture

Baguette tray 780x580 mm 9 transverse troughs NEW(5 pieces)Made of aluminium 1.15 mm with round cornersExternal dimensions : W.: 780 mm, D.: 580 mm, H.: 35 mm For details see picture

Key data: 500 mm, 420 mm, 380 mm

Machine Details Stock-No. 1105-03960 Type of machine Machining Center - Universal Make LID MAHO DMG Type DMU 50 EVO linear 5-axis Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Technical details x-travel 500 mm y-travel 420 mm Z-Travel 380 mm control HEIDENHAIN 530 tool adaptor BT 40 Additional information NC round-swivelling table, coolant device,HP 40 BAR TROUGHT THE SPINDLE Cabin magasin 60 parts BT 40, Chip Convoyer HEIDENHAIN TNC 530 TOOLEYES WITH ROBOT SYSTEMS EROWA COMPACT 10

Key data: 1020 mm, 570 mm, 510 mm

Machine Details Stock number 1105-03801 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type DNM 5700 Year of construction 2021 CNC control type Location: HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight base ex-factory Technical details longitudinal 1020 mm transverse 570 mm vertical 510 mm Tool changer 30 pos. max. tool length 300 mm max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 130 mm Rapid traverse 36 m/min Machine weight approx. 7 t Drive power 100% ED 11 kW Drive power 40 % ED 12000 kW Speed range 8000 1/min Tool holder BT 40 Table surface 1200 x 500 mm Permissible load (center of table) 800 kg Groove width 18 mm Number of grooves 4 pcs. Information CNC SIEMENS 828D El. Handwheel Conveyor 12000 RPM RPM MAGAZINE 40-SPEED ATC BT 40 BIG PLUS RENISHAW OMP 60 IKZ 20 BARS COOLING TROUGHT ...

1 used bread roll line Manufacturer: König Maschinenbau Austria Type: Eco 5000 Machine completely readjusted! New Steam Cylinder! New UV disinfection! Belts and troughs in good condition! The machine has been cleaned and is ready for immediate use! Viewing and test run possible at any time! Sold only to professionals. Only the written purchase contract is binding! The brands and characteristics mentioned here are only used to describe the product. If you have any questions, please feel free to call or send an email at any time! The machine can be supplied by our own fleet of vehicles (at a cost), or sent via freight forwarder! It is also possible to organise a commissioning with a master baker! In accordance with EU law, we would like to point out that we do not assume any guarantee, warranty, liability for material defects or the like. This does  ...

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03974 Type of machine Machining Center - Vertical Make KITAMURA Type My center 4 XIF Year of manufacture 2007 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Technical details x-travel 1016 mm y-travel 510 mm Z-Travel 510 mm table surface area 1000 X 522 mm turning speeds 20000 rpm Feed 36 m/min Rapid traverse 50 m/min control FANUC 16 IMB workpiece tool changer 40 SPEED tool taper BT 40 Additional information FANUC 16 imb CONTROL Chip Convoyer hp cooland trought the spinel 20000 rpm bt 40

used fat baking appliance Jufeba, overhauled, for 48 Berliners, with cooking chamber and trolley for 10 tipping troughs, manual, 8 kW

Key data: 810 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03984 Type of machine milling machining centers - vertical Make HURON Type VX 8 Year of manufacture 2013 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details X-Travel 820 mm y-travel 510 mm Z-Travel 510 mm total power requirement 10/14 kW weight of the machine approx. 5.3 t Additional information CNC SIEMENS 840 D CHIP CONVOYEUR ctx trought spindle VERYU NICE MACHINE 10000 RPM 20 TOOLS MAGASIN ISO 40 includ 4 axis

General SKUR1082 LocationBarneveld MakeClyde TypeVacuum Conveyor Year of constructionunknown Main Features MaterialStainless steel Inlet diameter240 mm Specified Features - Miscellaneous transport MaterialStainless steel 1.4301 (304) Miscellaneous transport Capacity3180 ltr Information Floorspace2,4x1,3 M Total height4 M Weight1500 Kg Extra SpecificationsVacuum conveyor with vacuum fan, filters, cabinet, day bin. Bulk density 86 Kg/M3, material temperature 30 degr. C, Troughput rate 400 Kg/h, Vertical convey distance 20 M, Horizontal convey distance up to 100 M Miscellaneous transportClydeConveying systems > Miscellaneous transportBrand > Clyde What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

Stockpile conveyor 21 m Belt width 650 mm troughed Manufacturer: Polxmair Frame made of square tubing Drive 2.2 KW Can be dismantled, everything is screwed Camp Saxony-Anhalt Price ex farm

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

Fat baking device / fat baking station Model: Primus 2/48 Super W Automatic reversing with timer control 2 baskets for max. 48 pieces Lifting device, removal device Manual Proofer with 10 ALU tilting troughs Temperature controller with safety thermostat Steam lid, drip tray Output approx. 480 pieces/hour Stainless steel version, mobile Connection 400V, 7.5 kW, 16A-CEE plug Dimensions: 1300/2100 x 815 x 1335 mm, WxDxH Used equipment cleaned and inspected with 3 months warranty Many more TOP fat baking devices in stock!