trough used for sale

5 s/s smoke trolleys for salmon, 15 floors, floor dimensions: (15x) 870 mm x 1000 mm, distance between floors: 100 mm, total dimensions: (6x) 1000 mm x 940 mm x 200 mm.

A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.

Ventilation system FABRIKat TROGES Vienna, different size, 4,000m3/h, 5,000m3/h, 7,500m3/h, 12,500m3/h, 26,000m3/h. All ventilation system sid equipped with 4 connections for: supply air, exhaust air, fresh air, exhaust air and heat recovery, cross heat exchanger, connections for hot water and cold water. More info. 0043-6641838175 or info@frigocom.at

General SKU381X955 LocationBarneveld MakeK-Tron TypeK-T-80 No.0708592 Main Features MaterialStainless steel Motor2 KW Inlet diameter300 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck (Twin-Screw Feeder) Screw diameter80 mm Pitch50 mm Shaft diameter40 mm Screw length700 mm With hoppercheck (± 460 Ltr.) Hopper sizesø 1000 x 1650 mm (500 mm CON) Inlet180 mm Outlet180 mm With DC motorcheck 2kW Information Floorspace1,6 x 0,55 m Total height2 m Weight150 kgMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

General SKU340X780 MakeK-Tron TypeK2m-T35 No.11240198/800890 Year of constructionunknown Main Features MaterialStainless steel Motor0.45 KW Inlet diameter220 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter35 mm Pitch50 mm Shaft diameter15 mm Screw length250 mm InletDia. 220 mm OutletDia. 110 mm With DC motor0,45kW, 200V, 2000RPM Without controlcheck Screw speed120-600rpm With breaking/mixing shaftcheck Information LocationBarneveld Floorspace0,85x0,45 m Total height0,4 m Weight50 kg CEcheckMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The  ...

General SKU381X957 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter2x 35 mm Pitch10 mm Shaft diameter40 mm Screw length400 mm With hoppercheck Capacity± 50 l. Hopper sizesø 200/400x880 mm Inletø 150 mm Outletø 100 mm With DC motorcheck 0,45 kW, 200 volt, 2000 rpm, With breaking/mixing shaftcheck Information TypeK-ML-KT35 Atex No.310358/MO-73640 Floorspace1,10 x 0,70 m Total height1,30 m Extra SpecificationsWith LWF D5 platform scaleMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU392U1285 LocationBarneveld MakeK-tron / Burgener TypeK-PH-MV-KT20 / AFS002 No.1102400/M-984900 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Metering screws Metering screwcheck Screw diameter± 25 mm (2x) Pitch± 10 mm Screw length300 mm With hoppercheck Hopper sizesdia. 200x220 mm Inletdia. 200 mm OutletDN40 With motor0,75 kW Screw speedmax. ± 460 rpm: With breaking/mixing shaftcheck (max. ± 21 rpm) Motor0,75 kW Information Year of construction2011 Mounted on framecheck Mounted on legscheck Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,4x0,8 m Total height2,4 m ATEX compatiblecheck Extra SpecificationsThe filling plant allows for the semi-automatic filling of biologically highly active, hygroscopic,  ...

-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.

This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with a power range of 30–120 W and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information.

General SKU204U055 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter100 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter38 mm (2x) Pitch20 mm Shaft diameter22 mm Screw length350 mm With hoppercheck Capacity40 l InletDia. 100 mm Outlet2 x Dia. 38 mm With motorcheck With DC motor0.45 kW, 200 volt, 2000 rpm Screw speed120-600rpm With breaking/mixing shaftcheck Motorcheck Information TypeK2-ML-T35-DR-PU No.609481/913774 Year of construction9-2015 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,8 x 1,4 m Total height1,7 m Weight170 kg Extra Specifications- Scale LWF D5-S - Serial number # 11138195/267980 - Type WMOD -1200N-SFT - The control system has been removed from the enclosure. The machine is ...

General SKU354T975 LocationBarneveld MakeK-tron Main Features MaterialStainless steel Motor0.37 KW Inlet diameter145 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameterdia. 35 mm Screw length2x 240 mm With hoppercheck Capacity± 165 Ltr. Hopper sizesdia. 650/200x1070 mm Inlet145 mm Outletdia. 70x40 mm With motor0,37 kW, 200 volt With DC motorcheck Without controlcheck(as is) Screw speed2000 rpm With breaking/mixing shaftcheck With vibro motorcheck Information TypeK2M-T35 No.10224295/263120 Year of constructionUnknown Mounted on framecheck Floorspace1,3x1,1 m Total height1,8 m Weight420 kgMetering screwsK-tronDosing units > Metering screwsBrand > K-tron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Plate filters/layers filter on role Manufacturer: KTM Troxler Type: FP 430 30 filter plates made of plastic DN 25 outlet with valve bottom Filter plate size: 40 cm x 40 cm In very good condition!

Depositor "Tromp" Type : 180.02.076 all stainless steel for liquid and semi-liquid products with hopper with servo-engins 2-head-outfeed programmable EN - DE – NL passage Max. 15 mm cylinder max. 500 cc digital - touchscreen mobile dimensions (l x w x h) : 1.400 x 800 x 1.500 mm y.o.c. 2000

Sheet filter, Plate Filter Type FP 430 on rolls for beer, wine, juice etc. Manufacturer: KTM-Troxler Type: FP 430 30 plastic filter plates DN 25 outlet at bottom with butterfly valve Filter plate size: 40 cm x 40 cm – with fittings complete

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Machine name: Dry goods doser Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year of construction: Unknown Speed: Mixer Speed: 5.6rpm Content: 75 litres Drive motor: 0.25 kW. - Mixer drive 0.25 kW Dimensions: length 800 mm x width 700mm x height 1200mm Empty weight: 100 kg Tech. Documentation: No Remark: mixed drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: F-Tron -Type: 2498219.1 -Art. No .: 881-01026 -Number: 1x control cards available -Price: per piece -Dimensions: 270/220/H45 mm -Weight: 1.4 kg

90s cold feed extruder, GE 90 x 16 D Vac, make Troester, with large hose / profile spray head, drive 52 KW Siemens AC, 4 TCU Siengle

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,

Manufacturer: Hackemack 2 Lampen UV Trockner, Year: 2000-2008, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Working widht max mm: 1400, Number of lamps: 2, kW power 1 lamp: 25, Lampenlänge mm: 1400, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Conveyor: Band, Exhaust air diameter mm: 2 X 200, Year :2000-2008

Manufacturer: 3 Lampen Purete UV-Trockner PRT-U3113e 120 Watt elektronische Leistungregelung 1300 mm, Type: PRT-U3113e, Year: neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 3, kW power 1 lamp: ca. 11,2, kW power all lamps: ca. 39, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: no, Lamps inclined installation: yes, Abluftmenge cbm/h: Stange, Feeding speed m/min: yes, Heating battery: 2.300 x 1.850 x 1.700, Year :neu

Various machines and peripheral equipment for metalworking are available. 1) Troma TC 300. 2) Sigloch and Schrieder Boromat 14 4. 3) Glaser. 4) Renard DM1-R. On-site inspection is possible.

A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible.

General SKU354T1034 LocationBarneveld MakeKtron TypeS-400 No.240-739 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter370 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Metering screws Metering screwcheck Screw diameter42mm Pitch31mm Screw length700 With hoppercheck Hopper sizes370x370x370 Inlet370x370mm Outlet44mm With motorcheck With DC motorcheck 0,55kW, 180Volt, 1800rpm With breaking/mixing shaftcheck Motorcheck 0,37kW, 220/380Volt, 1390rpm Information Year of constructionunknown Mounted on framecheck With switchgearcheck(as is) Floorspace1,15x0,65m Total height1,8m Weight200kg Extra Specificationsktron features additional transport/mixing screw. screw Dia: 77mm screw Dia: 50mm screw Length: 480mm screw Shaft Dia: 22mm product Exhaust: 80x80mm motor data: 1.1kW, 220/380Volt, 28 ...

Two gravimetric belt weighfeeders K-Tron are available. Load cell measuring range: 60N, belt width: 300mm, throughput: 650kg/h, max. grain size: 10mm. Machine dimensions X/Y/Z: approx. 1400mm/750mm/450mm, weight: approx. 150kg. The machine control was overhauled recently. Documentation available. An on-site inspection is possible.

Silo plant Tropper, consisting of 3 pcs. with usable capacity 40 m³ and 1 pc. 33 m³. Disassembly by the buyer. Condition Top, as it is set up indoors.

Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Year of Manufacture: 2012 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS = 0.3 bar - Flow ...

Manufacturer: Trockenkammer Lauber /Mühlböck Model: OLSF-2x1,20-3x1,20-13,00 Year of Manufacture: 2004 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS =  ...

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Manufacturer: Trotec Model: Rayjet Type of Machine : CO₂ laser cutting and engraving machine Find more here - / Contact us at -

This 3-axis CO₂ laser cutting and engraving machine manufactured in 2016 features a robust 80W laser, capable of handling materials like wood, acrylic, and leather. It includes the Atmos Duo Plus extractor and JobControl Vision software, enhancing operational efficiency and precision. Ideal for both cutting and engraving, the Trotec Speedy 360 machine we have for sale represents a significant opportunity for quality and versatility. Contact us for further details regarding this laser engraving machine.

WALTHER TROWAL - Type CA 340 -Speed range 800 - 1500 rpm -7.5 KW - Drive power -Separation facility -Soundproof cover -Control / Start / Stop / Timer / Separate Dimensions: LxWxH: 1.8x1.6x1.8 meters / Weight 1300Kg

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

Object: Rayjet Laser 30W/230/50/AA Manufacturer: Trotec Laser Deutschland GmbH Technical data: • 30 watts • 230 volts • 50 / 60 Hertz • Rulers in mm • With Slash • Standard plug Accessories: • Atmos Cube Rayjet 230 V • Suction connection cable beige 9po • Cutting table MM and inch 8015 • Power cord 20A • Wooden packaging Year of Make: 2021 Price: We ask for your binding offer Release date: 05/04/2026 Terms of delivery: ex site – EXW Wismar Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley type CT-8 -Load capacity: 12000 kg -Rollers: 8 polyurethane rollers -Number: 4x transport rollers available -Price: per piece -Dimensions: 480/200/H100 mm -Weight: 25 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley Type CT-12 -Load capacity: 18000 kg -Rollers: 12 polyurethane rollers -Number: 4x transport rollers available -Price: per piece -Dimensions: 480/310/H100 mm -Weight: 36 kg/piece

roll surface width: 450 mm roll diam. toproll: 203 mm roll diam. bottom roll: 203 mm output: 8,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: für Extruder 90 mm screw length:: -- screw speedl:: -- U/min drive power:: 13,6 kW Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These systems are mainly used for processing sausage meat using stuffing machines. But other high-viscosity products from the food industry, such as marzipan, can also be tested with these devices for very fine metallic residues. The high-strength product tubes can withstand pressures of up to 55 bar. RD80/HP screw fittings are used for connection. The whole unit is height adjustable and movable, so it can be connected to all standard chargers. Optionally, the units are available with a connecting gear for direct connection to the calibrator. Suitable ejector valves are available for emptying the metal! Special features Compatible with all standard filling devices Optional ejector and/or connecting gear Protection class IP69K for all components All components in hygienic design Height adjustable via maintenance-free spindle drive M-Pulse2 controller 4 quadra ...