triple used for sale

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

Rotation autoclave, four-cage autoclave, full water system with rotation, autoclave diameter: 1100 mm, allowable operating pressure 6 bar, allowable operating temperature 200 degrees, content 3400 liters, with Siemens control and digital recorder Jumo., refurbished and inspected.

Shredder mill with blades brand: Trit, Model: TRIT-510, motor: 10 hp, new, cutting chamber: 330 x 250mm, with electrical panel.

Description AUTOMATED MIXING PLANT WITH PLC COMMANDO Nr. 4 vertical stainless steel mixers 13 mc each Nr.1 recever capacity 4,5 mc with load cells Controllbox recipe controll system with PC

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

Tricool 99 S2/50 chiller 50/S2/1617 stainless combi chiller on mobile skid, also with heating

TRIOGEN E-BOX ORC for sale. Model: E-BOX ORC Year: 2017 Hours: 0 Capacity: 170 kW Hz: 50 Voltage: 400 V Scope of supply: Complete ORC E-Box. The E-Box is primarily an E-Box 170kWe Power, but can be also an E-Box 170 CHP (Vario). General Information: E-Box 170 Power – this is when the working fluid condensing (cooling) temperature is at 55degC, this is specific to recovering hot gas at around 500degC (engine exhaust for example). To achieve full power (170kWe gross), the cooling water needs to operate at 55degC, this generating maximum power of 170kWe refer to graph given at cooling temp of 55degC = 170kWe. Price: £240,000 .

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM

Stock number: 3732 INTERNAL CYLINDRICAL GRINDING MACHINE Manufacturer: TRIPET HAUSER HTT CNC , Type: TST 100 CNC-4R Machine NO.: T1000256, Year of construction: 2002 Specifications: Grinding length 300 mm Size internal grinding diameter 0.5-75 mm Center height B axis- 130 mm C-ash main spindle 3" - 100 rpm degree Z ash 340 - 0.0005 mm mm B- Ashes Manuel -30/+60 degree X ash cross slide 50 mm Grinding spindle speeds 4 spindles - 25,000 - 45,000 2x 75000 rpm Resolution 0.0005 mm Tool spindle dock speeds B- axis 10-1500 rpm CNC control. Control Brüsch TPS 3000 Fabr. Accessories: Centering chuck PHM Heyn Pneumatic. 250 mm Ø Papir Filter Knoll Length: 2500 mm, Height: 2300 mm, Width: 2500 mm, Weight: 3500 kg

Brand: GME Triulzi Type: Washing Machine Horizontal Length mm: 6000 Width mm: 3800 Height mm: 5500 Transport size L x W x H: 6,0 x 3,8 x 1,4 Number of brushes: 4 brushes Condition machine : Working disassembled Remaining: Combi with: GME Bavelloni 2x Double Edger (23010)

TRIO-Technik belt conveyor GF 2530-940-840 RA1962 Technical data: Conveyor length (NL): 2530 mm stand width (NB): 940 mm Belt width (GuB): 840 mm Overall height (BH): 85 mm Adjusted height: 630 mm Support feet: 2 pieces Conveying speed (v m/s): 0,078 Electrical data: 50Hz V380-500, kW 0,18 / S1 Belt: Green, smooth Year of manufacture: 10/1997 Optionally available: Frequency converter Features: Construction year: 1997 condition: good (used) Conveying length in mm: 2530 Nominal / outside width in mm: 940 Belt width in mm: 840 Driven: YES KW: 0,97 Conveyor speed m / s: 0,078 scope of delivery: including supports and side guides For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Son ...

Used vertical multi-row machine for filling loose products (instant coffee, etc.) into stick sachets by Triapex model HNXB6. New 2007. Machine description: - 6-row machine (forms 6 sticks simultaneously). - machine equipped with tubes with a diameter of 25mm - forms sachets with a width of 40mm (possibility to order tubes with diameters from 10 to 50mm from the producer) - adjustment of sachet length from 30 to 180mm - output of 30 cycles per minute (for sachet length 150mm); 30 cycles x 6 = 180 sticks per minute - screw dispensers with servo motors - regulation of the amount of dispensed product by changing the speed of the screw - film reel parameters: maximum reel diameter 600mm (the reels used by us have a diameter of 450mm); inner diameter of the reel (thimble) is 76mm - power supply parameters: input power 4.5kVA, 3 x 400V, 50Hz; air pressure 0.5 - 0.8MPa, maximum air con ...

x-travel: 3.000 mm y-travel: 1.600 mm z-travel: 1.200 mm control: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 ° C-axis (milling head rotation axis): +/- 240 ° feed and rapid traverse: : Rapid traverse B- and C-Axis: 50 rpm rapid feed Y,X,Z: 40.000 m/min Accelerations (X, Y and Z): 4 m/s² Machine table:: : Clamping surface: 3.500 x 1.750 mm T-slots: 27 x 22 mm H12 T-slot - distance: 125 mm max. workpiece load: 7.000 kg/m2 Max. distance table to spindle nose: 1.356 mm 2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1 Drive power (S1/S6):: 42/50 KW Torque (S1/S6):: 67/84 Nm Tool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mm max. tool-Ø adjacent slots free : 125 mm max. tool length: 300 mm max. tool weight: 12 kg coolant equipment: : tank capacity: 1.400 l connected load: voltage: 3x 40 V 50 Hz  ...

drill chuck, keyed drill chuck, collet chuck -Manufacturer:Triangle Brand, Drill chuck keyed drill chuck holder MK2 -Type: JS16 -Clamping range: 2-16 mm -Dimensions: Ø 56 x 158 mm -Weight: 1.0 kg

Manufacturer: Trittgitter, FREETEXT1: ca. 1.790 x 1.200 mm, FREETEXT2: 35 Stück,

Description Tria Granulator Motor power 45 kW Rotor Diameter 450mm Granulation chamber 840 x 490mm Knives 3 + 2 Conveyor belt for loading nr.3 screens; nr.1 screen 9mm; nr.2 screens 15mm

Roll wrapping and settling Trima BA1000 - Manufacturer: Trima Triebeser Maschinenbau GmbH - Type: BA 1000 - Year of construction: 2014 - Voltage: 400 Volt / 50Hz - Fuse: 16A - Power: 1.9 kW - Weight: 680kg - External dimensions approx. 220x105x215cm WxDxH

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

Countertop sweeper TRILETY used condition, see pictures Type LKM Sweeping body for Multicar vehicle Year of construction 1998 Dimensions: 330/190/190 cm Negotiation price: € 2.590,- net Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

TRIA GRANULATOR 100-65DN, (machine offered totally reconditioned - photos taken before reconditioning), Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, offered FULLY RECONDITIONED, INSTALLED POWER: 75 kw, rotor size: 1000x650 open

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

Inv. Num. : 8573 Type: VC 1810 Producer: TRIMILL Created: 2015 Parameters: Control system: Heidenhain iTNC 530 HSCI Work table length: 2000 mm Work table width: 1370 mm Maximum table load (uniform): 10000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14000 1/min X-axis travel: 1800 mm Y-axis travel: 1000 mm Travel Z axis: 700 mm Maximum feed speed axis X: 30000 mm/min Maximum feed speed axis Y: 30000 mm/min Maximum feed speed axis Z: 30000 mm/min Cone: HSK – A80 Number of all tools: 10 pieces Maximum tool diameter: 110/125 mm Max. tool weight: 12 kg Machine weight: 18000 kg Equipment: Tools Thermal clamps

5-axis portal machining center Type: VU 2313 Manufacturer: Trimill Year: 2010 Control: Heidenhain iTNC 530 X: 2300 mm Y: 1300 mm Z: 1000 mm Machine in good condition, under power. Find more here - / Contact us at -

CNC vertical machining center Type: VC 1110 Manufacturer: Trimill Year: 2005 Control: Heidenhain iTNC 530 HSCI X: 1100 mm Y: 1000 mm Z: 550 mm Table: 1300 x 1370 mm Max table load: 8000 kg Chip conveyor Machine weight: 16000 kg In good condition, under power Find more here - / Contact us at -

Measuring range: 1.000 mm error limit 20°C +/- 1°C: 3 + L(mm) / 300 µm repeatability: 2sec: 2 µm Resolution: 0,01 / 0,001 mm adjustment speed: max. man. 1 m/s Power: 0,7 - 1,6 N temperature: +10 .. +40 °C total power requirement: 15 W weight of the machine ca.: 15,0 kg dimensions of the machine ca.: 0,4 x 0,4 x 1,30 m Documents: Transmission: RS 232 Height Measuring Device TRIMOS - V 1002+ - Application area: 1.235mm - Max. angularity deviation: 12µm - Autonomy with air cushion: 30h - Autonomy without air cushion: 100h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Steel Bracket Insert Fabr. Tripan, Type 431 Kj Uregwt Ucehyxkonb Please request the respective quantity individually.

Manufacturer: Triventec Type: Dry ice blasting machine (exact type not known) Number of units available: 2 pieces Condition: used Use: Cleaning and surface treatment by dry ice blasting Location: Bremen

Trimos TVM 602

Trimos V 604 +

Tripet TST201CNC nr 3520.17.137 BJ.1987

General SKU212W134 LocationBarneveld MakeTricom Frimafa SWM Typeschudbed VFB 10./3 No.00064-01 Year of construction2000 Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) Information Total height2,60 m Weight6170 kg Floorspace8,50x1,80 m Extra SpecificationsWith filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.Fluid bed dryers continuousTricom FrimafraDryer ...

General SKU379W1588 LocationBarneveld MakeTrivac TypeD65B Mach.No.11296 20200007866 Main Features MaterialStainless steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 230/400 volt, 1390/1695 rpm Information Year of construction2005 Total height0,40 m CEcheck Floorspace0,80x0,40 m Weight90 kgVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Control screening machine Tripette & Renaud model 21 M2 Conical strainer basket 300-360/ 800 Power 3 kw V-belt drive Wire covering MW 1.2 Outlet funnel is included Good condition

Internal cylindrical grinding machine, Tripet Swiss, 1991, Schleifdia. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...

This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine.

TRIA GRANULATOR XT 9042, (machine offered totally reconditioned - photos taken before reconditioning), 900 mm wide rotor, Infeed dimensions : 1000 x 550 mm., Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, now mounting a 12 mm.screen, prepared for extraction through blower, control panel, constructed in 2016, information given by previous owner, the machine is offered totally reconditioned with new knives and general reconditioning, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber ...

TRIA type 32-20 / JM granulator / crusher in excellent condition New engine installed last month Year: 2010 Shredding chamber dimensions: 320 x 200 mm Power: 4 kW / 5.5 hp Fixed blades: 2 Rotating blades: 3 Rotor diameter: 180 mm Hourly shredding capacity: 40 to 60 kg

General SKU026N542 MakeTria (It) Type400/ELR No.33.0441.85 Mounted on framecheck Main Features Motor15 KW Inlet diameter400 mm Width420 mm Specified Features - Granulator MaterialMild steel Granulatorcheck Rotor width420mm Rotor diameter400mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 With hoppercheck Inlet500x300mm Hinged topcheck Motor15 KW, 380 Volt Information LocationBarneveld With switchgearcheck Floorspace1,9x1,2 m Total height2,2 m Weight1300 kg Extra Specifications- OVERHAULED - Sieves included: 10 mm, 12 mm, 16 mm GranulatorsDiscountTriaMills > GranulatorsDiscountBrand > Tria What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU408X1220 LocationBarneveld CEcheck MakeTrivac Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 200/400 V 3~, 1450 rpm Hydraulic drivecheck MakeOerlikon TypeAR 40-65 Mach.No.18922 Year of construction2016 InletDN40 KF OutletDN40 KF Information TypeD65B Mach.No.31001371345 Year of construction2016 Floorspace0,80x0,50 m Total height0,50 mVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU408X1219 LocationBarneveld CEcheck MakeTrivac Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW (400 V, 1450 rpm) MakeOerlikon TypeAR 40-65 Mach.No.18922 Year of construction2016 InletDN40 KF OutletDN40 KF Information TypeD65B Mach.No.31001371346 Year of construction2016 Floorspace0,80x0,50 m Total height0,50 mVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

GT-5409 Water Blade Grinder Mill - Brand: TRIA - Model 32-30/CN - With cutting chamber: 310 x 320 - Rotor: Open - Engine: 10 hp (7.5 KW) - With centrifuge PREALPINA brand - Made of stainless steel - 1200 x 0.3 - 4 HP (3 KW) motor - 1200 x 0.3 - Electrical panel - Platform

GT-5410 Water Blade Crusher Mill - Brand: TRIA - Model 32-30/CN - With cutting chamber: 310 x 320 - Rotor: Open - Engine: 10 hp (7.5 KW) - With centrifuge PREALPINA brand - Made of stainless steel - 1200 x 0.3 - 4 HP (3 KW) motor - 1200 x 0.3 - Electrical panel - Platform