triple used for sale

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Triple flour-collecting screw conveyor in steel design Total length 6.2 m, outlet at 5.2 m Screw diameter 150 mm 1 m counter-rotating thread, slope 105 cleaning flaps, Wooden lid with folding boxes, 2 intermediate bearings each, motor 1.5 kw

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Forklift front forklift in very good condition Manufacturer Jungheinrich Year of construction 2011 Payload 3.000kg Operating hours approx. 4,200 hours Triplex mast with full free lift Lifting height approx. 5m Three valves up to the mast Side shifters Own weight approx. 4,73to Height approx. 2250mm Total width approx. 1.300mm Turning radius approx. 2.37mm All information to the best of our knowledge, but without guarantee!

Posiweigh Triple200 Three lane linear weighing line Serial: 3054 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

Triplex Plunger Pump Unit KD825 URACA for Press Drive consisting of: Pump KD825 URACA Pressure Lubrication unit Water-Oil cooler Reduction bevel helical gear box (angular design) with couplings Base frame open type Discharge ball resonator (pulsation damper) Pressure safety valve, set pressure 360 bar Induction electric motor Process medium: water-oil emulsion Discharge pressure 325/320 bar Capacity 1,330 l/min Pump speed 340 min-1

1 of un-used power supply, Schroff MPS Triple, type MPS 022, Vin 110-230 VAC (3 A), 50-60 Hz., Vout 5 V DC (23 A) / 12 VDC (3,5 A) / 12 VDC (2 A). Also known as KHKS/Kisters part numbers: 003192946 / X003192946 / K003192946

CNC turning center SPINNER TTS 65-Triplex Year of construction 2019 Fanuc Series 31i Model B Travel: X1/X3: 180 mm X2: 180 mm Y1/Y3: 90 mm Z1/Z2: 620 mm Rapid traverse X,Y,Z: 30 m/min Main spindle 22 kW Max. speed: 5,000 rpm Max. bar passage: 65 mm Sub-spindle 22 kW Max. speed: 7,000 rpm 3 x 12-cavity tool turret 3 x 12 powered tool stations Max. speed: 8,000 rpm Separate coolant system with coolant filtration and high-pressure pumps Hyfra coolant temperature control Top Automazioni X-files Bar Feeders, Bars up to 3,000 mm Conveyor CE mark

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package  ...

Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...

turning diameter: 250 mm turning length: 600 mm control: FANUC Series 31i-Model A travel -x axis: 180 mm travel -y axis: +/-45 mm - - - - - Main spindle - - - - -: - - - - - - turning speeds: 0 - 5.000 U/min bar capacity: 65 mm --- Subspindle ---: - - - - - - turning speeds: 0 - 7.000 U/min bar capacity: 42 mm --- upper turret 1 ---: - - - - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X1 / Y1 / Z1 St. Tools speed: 8.000 U/min --- upper turret 2 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Tools speed: 8.000 U/min Number of axles: X3 /Y3 / Z3 St. --- lower turret 3 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X2 / Z2 St. Tools speed: 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axi ...

Laminator Triplex solventbased  Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min

System: diaphragm pump Type: LEWA G3H M511S Gr. 30 Description: with diaphragm pump head, material stainless steel Year of construction: 2002 / refurbished 2008 Stroke length: 30 mm Hubfreqquenz: 175 min1 Rod power: 16000 (N) Measuring current at pmax: 170 (ges. 510) l/h Max.Zul. working pressure: 250 bar at least. suction flange pressure: 1.0 bar Connections: Suction and pressure side DN 15 Pump body: Stainless steel 1.4571 Diaphragm: PTFE Guide / ball: 1.4581 / 1.4301 Speed: 1440 RPM Power: 7,5 kw Voltage: 230/400 Technical documents: Yes

Drive chain, triplex chain, roller chain -Size: 24B-2 1 1/2 x 1 inches -Length: 1.25 m -Number: 13x chains available á 1.25 m -Price: per chain -Weight: 26 kg/piece

Sprockets, triplex sprocket, sprocket -Sprocket pitch Triplex: 1 1/4 x 3/4 -Number of teeth: 45 teeth -Diameter: 470 mm -Total width: 140 mm -Tooth width: 18.5 mm -Hole: Ø 125 mm -Number: 4x sprockets available -Price: per piece -Weight: 103 kg / 106 kg -other sprockets in stock

Sprockets, triplex sprocket, sprocket, conveyor sprocket -Pitch triplex sprockets: 1x 17.02 mm -Number of teeth: 40 teeth -Diameter: 340mm -Total width: 105mm -Dimensions: see photos -Intake: Ø 75 - 76 mm -Total dimensions: Ø340 x 105 mm -Weight: 45.3 kg -other sprockets in stock

The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...

The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...

Triple Hydraulic Pump, Hydraulic Pump ORSTA C25 - 3L + C25 - 2L + A6.3L ( C25-3L+C25-2L+A6.3L ) TGL 10859 flange: 112 x 92 mm New ! Dimensions: 435 x 105 x 115 mm

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, triple hydraulic pump -Type: ZZ EP 0012 / 32 AP 0168 / TK11/11/6SF -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 2x pumps available -Price: per piece -Dimensions: 320/90/H115 mm -Weight: 9.1 kg/piece

Consists of: hydraulic lifting mast with 3-point suspension, side shift, hydraulic lifting cylinder, lifting capacity: approx. 1,600kg, lifting height: 1940mm, required hydraulics: double acting, forks 1200mm, Auction-ID: A1-40132-280

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qv_q8483Fcg - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 07/01/2020 48V 5PzS 625Ah, very good performance measured with 50.6V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat with lumbar support Auction-ID: A1-45449-217

Youtube function and status video: https://youtu.be/FsXly6DXa6c Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 80V 5PzS 625Ah, with very good performance; measured at 83.6V - Triplex mast with full free lift and adjustable lifting height limitation - 3rd + 4th valve; with sideshift - Facelift model with tilt angle display (practical for sensitive goods) - Electric lateral quick-change battery extension Auction-ID: A1-45449-56

Youtube function and status video: https://youtu.be/q0PF2kLWjA4 - Former Linde full-service device - current service valid until 01/2027 - Current UVV valid until 01/2027 - Triplex mast with full free lift - Foldable platform - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Battery: 05/2019 24V 375Ah, with weak power, measured at 25.4 volts Auction-ID: A1-45449-394

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/8N9y0Oahsuc - Former Linde full-service device - Service valid until 12/2026 - UVV valid until 12/2026 - Battery: 33/2021 48V 625Ah, good performance measured with 49.6V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Blue safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-45

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/TCmMUzOKe20 - Former Linde full-service device - Battery: 2021 regenerated by Linde 49/2025 capacity 95%, 48V 775Ah, very good performance measured with 50.3V - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - LED front work light - Blue Safety Light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-106

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/fhHgzyb32fo Former Linde full-service machine valid service until 12/2026 UVV valid until 12/2026 Battery: 206/11/2019 24V 3PzS 345Ah , with very good performance, measured at 25.0 volts - Triplex mast with full free lift Auction-ID: A1-45449-354

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/EpaP4ZF4VaY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 24/2019 48V 750Ah, very good performance measured with 51.2V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Windshield with windshield wiper - Roof pane - Side fall-out protection (can be easily dismantled) - white non-marking tires - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-135

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https: //youtu.be/tlFYOBXKgKc - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 03/2020 48V 5PzS 625Ah, very good performance measured with 50.59 V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - Roof pane - LED front work light - Blue safety light at the rear - Comfort seat Auction-ID: A1-45449-220

Youtube function and status video: https://youtu.be/lYqQRQ0mabk Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 11/10/2019 24V 5PzS 625Ah, with very good performance; measured with 25.03V - Trplex mast with full free lift - 3rd valve; Sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45449-192

Youtube function and status video: https://youtu.be/TfB-a20Mxmw Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 01/07/2020 24V 8PzS 920Ah, with very good performance; measured at 25.5V - Triplex mast with full free lift and adjustable lifting height limitation - 3rd + 4th valve; Fork adjuster with sideshift - Facelift model with tilt angle display (practical for sensitive goods) - White non-marking tires Auction-ID: A1-45449-68

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/s9ofFnvYyi4 - Former Linde full-service device - Service valid until 12/2026 - UVV valid until 12/2026 - Battery: , very good performance measured with V Auction-ID: A1-45449-158

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/LXsMjmBIZSE - Former Still full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 41/2025 48V 625Ah, very good performance measured at 50.7V - Triplex mast with full free lift - 3rd valve, sideshift - White non-marking tires - LED front work light - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-100

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/G2FozNiwWtA - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 12/2020 48V 625 Ah , very good performance measured with 50.2V - 3rd valve; with sideshift Auction-ID: A1-45449-119

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HIAR1MndnC0 - Former Still full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 12/12/2018 80V 5PzS 775Ah, very good performance measured with 84.1V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-37

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/loUV6qkRPGg Former Linde full-service machine valid service until 12/2026 UVV valid until 12/2026 Battery: 28/2020, 24V 3PzS 375Ah, with good performance, measured at 24.4 volts - Triplex mast with full free lift - Integrated charger Auction-ID: A1-45449-360

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/w9UGyjMu78U - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 16/2018 80V 5PZS 775Ah, very good performance measured with 84.5V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45449-93

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video:https://youtu.be/gn1RA5Puyho - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 80V/5PzS/575Ah, very good performance measured at 83.65V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift and mast position memory - 3rd + 4th valve; Fork adjuster with sideshift - Windshield with windshield wiper - LED front work light - LED work light at the rear - Blue safety light at the rear - Comfort seat Auction-ID: A1-45449-76

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/pshuqLuH7wA - Former Still full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery :07/2018 48V 775Ah, good performance measured with 49.3V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Safety light at the rear - Comfort seat with lumbar support Auction-ID: A1-45449-290

Youtube function and status video: https://youtu.be/rIF1lWT0Ck4 Former Linde service device Service valid until 01/2027 UVV valid until 02/2027 Battery: 23/2020 80V 775Ah, with good performance; measured at 82.3V - 3rd + 4th valve; Fork adjuster with sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45449-103

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/o86OKyfdcTY Former Linde service device Service valid until 21/2026 UVV valid until 21/2026 Battery 01/2021 48V 625 Ah, very good performance measured at 51.8 V - 3rd valve; with sideshift - Triplex mast with full free lift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45449-52

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/nhNNC63SvDI - Former Linde full-service device - valid service until 03/2027 - UVV valid until 03/2027 - Battery: 04/07/2019, 24V 3PzS 375Ah, very good performance measured with 24.6V - Integrated scale Auction-ID: A1-45449-380

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/husV0yeZqlM - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 11/08/2020 48V 5PzS 775Ah, very good performance measured with 51.5V - Triplex mast with full free lift - 3rd valve, sideshift - Roof pane - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45449-210

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/IinXrWHefgU - Former Linde full-service device - Battery: 28/2023 24V 3PzS 375Ah, very good performance measured with 25.4V - Attention: Initial stroke (additional stroke for second pallet) does not work Auction-ID: A1-45449-405

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/peaopTdiX9U - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 23/07/2018 24V 8PzS 1000Ah, very good performance measured with 25.7V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating - Integrated charger Auction-ID: A1-45449-88

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk A mast that is too high can be dismantled and loaded for transport on request. Youtube function and status video: https://youtu.be/Wvzf89TCjBM - Former Linde full-service device - Next service due in 401 operating hours - UVV valid until 02/2027 - 3rd valve, sideshift - Semi-cab with windshield wipers - LED front work light - Blue Safety at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-129

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/DH2wS9Fzpbs - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 30/06/2020 24V 375 Ah, very good performance measured with 25.1V - Triplex mast with full free lift - Integrated scale Auction-ID: A1-45449-358

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/vSnrGn6A6ug - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 05/2018 80V I5PzS 625Ah, very good performance measured with 83.1V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster 37-130 cm with sideshift - Windshield with windshield wiper - Roof pane - white non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45449-39

Youtube function and status video: https://youtu.be/2QSTngjtygo Service valid until 09/2026 UVV valid until 09/2026 3. Valve; Sideshift Triplex mast with full free lift Forks new 10/2025 Auction-ID: A1-45449-89