tri block used for sale

Description Feeding mouth size: 420 x 160 mm Cutting chamber size: 430 x 180 mm Engine power: 1.5 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Production: 20-400 Kg/h Material extraction: drawer with extraction hole Machine never used, in like new condition

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

Description Feeding Mouth Size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine Power: 3 Kw Rotating Blades: 3 Fixed Blades: 2 Grid Hole Size: 5 mm Indicative Production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

grinding diameter:3 - 150 mm grinding length:200 mm total power requirement:380V, 50Hz, 30 kW dimensions of the machine ca.:5 x 3 x 2,5 m

X-travel: 1000mm, y-travel: 1100mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-14,000/min, weight: 16t, operational hours counter controls/ machine/ spindle: 16,337/ 74,372/ 37,827.

X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h.

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

Output: 200kg/h, motor power: 11kW, with instruction manual.

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022.

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

Used sticks packaging machine, new 2004, 2007, 2007. Capacity 180 pcs/min.

TRIA GRANULATOR 42-20 BLT, infeed 340 x 200 mm., grinding surface 420 x 200 mm., 4 kw drive, n.3 rotating knives, n.2 still knives, 5 mm screen holes (or bespoke), extraction with drawer

Line for filling PET bottles with volume 5 liters with still water. Line capacity: 1800 bph Year of Build: 2007 The line consists of the following elements: 1) Triblok SPOMASZ 8/12/4 (8 rinsing handles, 12 pouring heads, 4 screw heads) 2) LABTECH labeling machine for cold STRETCH SLEEVE labels (foil labels from the sleeve) 3) Plate and roller belt conveyors of the 5.0L bottle line - set. approx. 12 mb . We also offer blow molding machines for PET bottles 5 liters.

Manufacturer: Trittgitter, FREETEXT1: ca. 1.790 x 1.200 mm, FREETEXT2: 35 Stück,

photos taken before reconditioning, Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.2 screens Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)

SPECIFICATIONS: Rotating frame press for glulam Max. working length mm: 3000 Max. working width mm: 1200 Thickness mm: min 25 - max 90 12 charging stations Complete with "Clam Carrier" pusher

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 2900 rpm at 50Hz -Speed: 5620 rpm at 100Hz -Shaft diameter: 15 mm -Construction: B5 -Protection class: IP 55 -Weight: 12.5 kg

Brand: GME Triulzi Type: Washing Machine Horizontal Length mm: 6000 Width mm: 3800 Height mm: 5500 Transport size L x W x H: 6,0 x 3,8 x 1,4 Number of brushes: 4 brushes Condition machine : Working disassembled Remaining: Combi with: GME Bavelloni 2x Double Edger (23010)

Vertical machining center Depomill CUT 2012 Manufacturer: Trimill Year: 2005 Control Heidenhain ... TNC 530 Clamping table surface ... 2300 x 1600mm Axis X ... 2000mm Axis Y ... 1200mm Axis Z ... 800mm Spindle speed ... 30-12000/min. controlled axes ... 5 HSK 100 Magazine slots ... 10 Main engine power ... 25kW Max. spindle torque... 200Nm Machine weight ... 25000kg L x W x H ... 5000x4440x4435mm The machine is in good condition, possible to test under electricity.

For sale is a Trima K2 head machine with a Trima forming station. - approx. 6 min. relaxation time - Stüpfelstation ( Kaiser / Carinthian ) - Transverse discharge

Manufacturer: Trindade Model: Rosela 12/6 Speed = 3500 bottles/h Equipment in Working Conditions Safety Systems: Yes Technical Documentation: Available

x-travel: 3.000 mm y-travel: 1.600 mm z-travel: 1.200 mm control: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 ° C-axis (milling head rotation axis): +/- 240 ° feed and rapid traverse: : rapid feed Y,X,Z: 40.000 m/min Rapid traverse B- and C-Axis: 50 rpm Accelerations (X, Y and Z): 4 m/s² Machine table:: : Clamping surface: 3.500 x 1.750 mm T-slots: 27 x 22 mm H12 T-slot - distance: 125 mm max. workpiece load: 7.000 kg/m2 Max. distance table to spindle nose: 1.356 mm 2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1 Drive power (S1/S6):: 42/50 KW Torque (S1/S6):: 67/84 Nm Tool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mm max. tool-Ø adjacent slots free : 125 mm max. tool length: 300 mm max. tool weight: 12 kg coolant equipment: : tank capacity: 1.400 l connected load: voltage: 3x 40 V 50 Hz  ...

As pictured without cables. Shipping D-country without islands 9.-

Engine: 160.0 kW Rotor diameter: 800 mm Rotor width: 1200 mm

Year: 2011 - technically efficient, ready to work - after full service - for shaped/arched posts

TRIO-Technik belt conveyor GF 2530-940-840 RA1962 Technical data: Conveyor length (NL): 2530 mm stand width (NB): 940 mm Belt width (GuB): 840 mm Overall height (BH): 85 mm Adjusted height: 630 mm Support feet: 2 pieces Conveying speed (v m/s): 0,078 Electrical data: 50Hz V380-500, kW 0,18 / S1 Belt: Green, smooth Year of manufacture: 10/1997 Optionally available: Frequency converter Features: Construction year: 1997 condition: good (used) Conveying length in mm: 2530 Nominal / outside width in mm: 940 Belt width in mm: 840 Driven: YES KW: 0,97 Conveyor speed m / s: 0,078 scope of delivery: including supports and side guides For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Son ...

Triade Turned Drilling Machine Number of spindles: 3 Spindle system: Rights 3kw Left 3kw Side 0.75kw Pneumatic control Pneumatic Component Clamp

(machine offered totally reconditioned - photos taken before reconditioning), TRIA PRR100 GRANULATOR, rotor width 1.000 mm., closed rotor diam.650 mm., n.5 rotating knioves, n.2 still knives, 110 kw drive, hopper mm.600 x 1.000, The machine is offered TOTALLY RECONDITIONED, NEW control panel, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)

TRIA GRANULATOR 100-65DN, (machine offered totally reconditioned - photos taken before reconditioning), Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, offered FULLY RECONDITIONED, INSTALLED POWER: 75 kw, rotor size: 1000x650 open

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), type XT 9042, 900 mm wide rotor, Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, screen 12 mm., prepared for extraction through blower, control panel, constructed in 2016, the machine is offered totally reconditioned, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber, are also widely used for an immediate and safe in-line grinding of film and trims. The rotary discs integral with the roto ...

TRIA GRANULATOR XT 100-80, (machine offered totally reconditioned - photos taken before reconditioning was completed), - Granulating chamber mm.1.040800 (40,9431,50”), - 110 kw drive, - New rotor, diam 620 mm (24,41”) 1.000 mm.wide (40), - N.5 Rotor knifes, - N.2 Fixed knifes, - Electrical hopper opening, - Blower and cyclone Included, - new electric panel, - rotor bearings, motor bearings replaced, - 12 mm dima. screen (or bespoke), - constructed in 2004, - see how we recondition at [Germanplasts](https://www.youtube/watch?v=BCW07AKu-F8), Power: 110 kw, width: 1.000 mm.(40), Knives: 5 R+2S

The TRIAGI is the only equipment that solves in an optimized way, the processes of heating, premixing, addition, emulsion and dispersion, deaeration and cooling of the product, without transfers or intermediate manipulations to which are always at odds with manufacturing costs, productivity and cross contamination risks. It offers the following advantages, derived from its careful design and construction: ·There are no dead zones. ·The self-adjusting scrapers sweep the surface corresponding to the useful volume. ·The sealing system guarantees a perfect closure even when operating under vacuum. ·Possibility of interchange of high speed homogenizing turbines.

Obráběcí centrum SPEED 1110 je v dobrém technickém stavu, po dohodě možné vidět pod proudem. Obrobková probe Heidenhain TS740. Automatická výměna nástrojů - 10 pozic, chlezení středem (pouze vzduch). Hmotnost stroje: 15000 kg Podélný pohyb stolu - osa x: 1100 mm Příčný pohyb stolu - osa z: 700 mm Svislý pohyb stolu - bear and: 1000 mm Kužel vřetena: HSK A80 Otáčky vřetena: 30 - 14000 ot / min Rozměry stroje d x š x v: 4400x5500x3810 mm

Used vertical multi-row machine for filling loose products (instant coffee, etc.) into stick sachets by Triapex model HNXB6. New 2007. Machine description: - 6-row machine (forms 6 sticks simultaneously). - machine equipped with tubes with a diameter of 25mm - forms sachets with a width of 40mm (possibility to order tubes with diameters from 10 to 50mm from the producer) - adjustment of sachet length from 30 to 180mm - output of 30 cycles per minute (for sachet length 150mm); 30 cycles x 6 = 180 sticks per minute - screw dispensers with servo motors - regulation of the amount of dispensed product by changing the speed of the screw - film reel parameters: maximum reel diameter 600mm (the reels used by us have a diameter of 450mm); inner diameter of the reel (thimble) is 76mm - power supply parameters: input power 4.5kVA, 3 x 400V, 50Hz; air pressure 0.5 - 0.8MPa, maximum air con ...

Description: Jaw width: 120 mm Approx. Onsite Dimension. (l x w x h): 250 x 180 x 120 mm, weight approx.: 50 kg

Description: Jaw width: 120 mm Approx. Onsite Dimension. (l x w x h): 250 x 180 x 120 mm, weight approx.: 50 kg

Paint line for parquet working width 450 mm Varnishing machine 2 positions with dosing and application roller 2nd position with reverse station 3 x motor 0,25 kW, 1 x 0,37kW feed rate: 5 - 20 m/min 3 rubber application rollers 40? Shore available and 1 moose gummi roller Polishing conveyor Suitable for distribution of oil, stain, UV/LED products over the parquet board Conveyor belt: 6000 x 450 mm The machine is equipped with 1 pad unit and 3 brush units 1 x motor 0,75kW, 3 x motor 0,55 kW 4 brushes available Cleaning machine for 3 brushes

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

I am happy to offer a small glass washing machine TRIULZI, model TOSCANA SPL 800, built in 2007 in very neat condition. max. glass width 800 mm, 4 brushes, the glass thickness: 2 - 8 mm, min. glass dimensions: 100 x 50 mm,

Internal cylindrical grinding machine, Tripet Swiss, 1991, Grinding slide. 0.5 - 30mm, Grinding Depth: 50, Center Height: 102, Axes: Z , Y, U, B, V, , autom. Chuck...

Separating drum/ model ATS Year of construction 2008 Dimensions: LxWxH = 1.40 x 0.68 x 1.35m

General SKU026N542 LocationBarneveld MakeTria (It) Type400/ELR No.33.0441.85 Main Features Motor15 KW Inlet diameter400 mm Width420 mm Specified Features - Granulator Granulatorcheck Rotor width420mm Rotor diameter400mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 With hoppercheck Inlet500x300mm Hinged topcheck Motor15 KW, 380 Volt MaterialMild steel Information Mounted on framecheck With switchgearcheck Floorspace1,9x1,2 m Total height2,2 m Weight1300 kg Extra Specifications- OVERHAULED - Sieves included: 10 mm, 12 mm, 16 mm GranulatorsTriaMills > GranulatorsBrand > Tria What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

Description: serial number: 2312 control: HEIDENHAIN ,iTNC 530 working hours: approx. 68649 h spindle hours: approx. 40638 h  , number of axes: 5 travels: X-axis: 2300 mm Y-axis: 1300 mm Z-axis: 1000 mm C-axis: 150° (+60/-90) B-axis: 370° (+/-185) table dimensions: 1800 x 1800 mm max. table load: 18000 kg feed rate: 20 mm/min.  , spindle power: 25 ,kW spindle speed range: 10 - 10000 rpm  , toolchanger positions: 10 toolholder: HSK-A100 max. tool diameter: 110 mm max. tool length: 450 mm max. tool weight: 12 kg  , coolant through spindle lubrication unit chip conveyor swivable head  , tables and cabinet in front of/next to the machine are not included in the scope of delivery please also take a look at the PDF document ,of this machine z-motion: 1,000 mm, x-motion: 2,300 mm, y-motion: 1,300 mm, control: HEIDENHAI ...

Description: Lot consisting of: 1 TRIAG vise model TB 15-0585_A Machining support accessories weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 300 x 300 x 250 mm

Type 40-20/ BL-T infeed 400 x 200 mm Granulation chamber 400 x 200 mm including towing unit n.3+2 knives screen 5 mm extraction drawer, prepared for pneumatic extraction (not included) construction year 1994, machine offered reconditioned

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.