treatment used for sale

Treatment bath with cooling pipes. Belt discharge and drying blower

Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...

Water treatment plant Manufacturer BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 Water treatment plant BWT Osmotron plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production

SEKWANG Shot Machinery Co. Ltd SKHSS-4600 PRE-TREATMENT SYSTEM (2006) Including: -Main Pre-treatment system -Main control panels -Conveyor -Compressor -Dust and Fume Collector -Pre Heater -Shot blasting -Vacuum Recovery -Welding Machine -Blower -Mixing room Including an assortment of spare parts : Bearings Chain Belts Manganese Filter Sacks, etc. Make SEKWANG Shot Machinery Co. Ltd Model SKHSS-4600 Year 2006

Containerrised water treatment installation . consisting of three 20 FT offshore containers build onder DNV One for the power supply with a Scania engine type DI 16 55 M 532 KW 1800 rpm connected with a Leroy Somer generator type M 47.2L9C6S4 including switchboard with circuit breaker and fuel tank . Two containers with the Hatenboer water treatment installation capacity 200 M/ day photo's from the installation available . infoperfectmachinery.nl or +31 78 6158040 Whatsapp +31 6 53549259

WATER TREATMENT PLANT CONSISTING OF WELLMATE WATER SOFTENING & REVERSE OSMOSIS SYSTEM MERLIN RO-EASY 40 S. No.: RO-EASY40 – 151557/201 Equipment / Additional information: V 230 // Hz 50 // A 2,4 // KW 0,55 Permeate output at feed water temperature 15 ° C and 4 bar flow pressure: 40 I / h (incl. Pressure vessel 25 I)

Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.

Water treatment plant Manufacturer BWT Type Septron Line 40 VAL Year of construction 2013 Capacity: 900 L/h ultrapure water Inlet pressure: 6 bar(g), raw water pressure 4-6 bar, raw water flow 1300 l/h Maximum temperature: 50°C Various electrical individual connections

Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Description: condensate treatment device Approx. Onsite Dimension. (l x w x h): 570 x 300 x 340 mm, weight approx.: 10 kg

Nijhuis waste water treatment system, consisting of: Nijhuis scraper, Efcon cabinet for taking water samples, various pumps, pH meters and flowmeters, total dimensions: 4500 mm x 3000 mm x 2700 mm.

Grinding oil treatment plant, filter system, cooling system, cleaning system used; Manufacturer: TRANSOR Filter GmbH; Type: 3890-800A; Year of construction: 2002, rebuilt in 2010; only for low-viscosity abrasive oils; Filter capacity approx. 60-70 l/min; Filter fineness: 3-5 μm; dirty oil tank 400 l; clean oil tank 400 l; Max oil temperature: 60°C; Cooling capacity 6.1 kW; Dimensions: approx. 1700 x 1100 x 2400 mm; Fully automatic regeneration of the filter rods.; No filter aids (e.g. diatomaceous earth) are required for the system;

Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

M. Number: 405198 Item: 381021 Power supply: 230V / 50Hz Power: 0.55KW Max pump pressure: 14 bar Max operating pressure: 14 bar Mediumstem min / max: 5/35 C Min concentrate flow: 84l / h Permeate Max: 250l / h Permeat backpressure max: 0.3 bar

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

1 - Aerzen GM7L - Rotary lobe blower unit Delta Blower generation 5. Positive pressure. Suction pressure: 0,613 bar Discharge pressure: 1.013 bar Power : 7.5 kW Flow rate: 420 m3/h Oil free ATEX classification Weight : 381 kg Equipment sold with original filter + a new one. Blower with silencer, frame integrating a resonance absorber, machine feet, connection to the body with silencer for non-return valve, safety valve, vaccuostat with pressure gauge. 2 - Infastaub MKR 0-1/20 - Secondary safety filter Temperature: 0?C/+40?C Filter surface: 20 m2 Volume: 360 m3/h Structural resistance: - 500 mbar Filter quality: H14 Filter body : Stainless steel ATEX classification Equipment sold with original filter + a new one.

Was used for cleaning perforated metal sheets, including documentation, without accessories or spare parts.

Output: 2000l/h, efficiency/yield: 70%, feed water pressure: 3-6bar, operating temperature 5-35°C, length: 850mm, width: 2450mm, height: 1950mm, with documentation, without storage tank, inspection is possible.

Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.

Working width: 2500mm, with controls.

With High-Voltage Generator Tantec HV2002, connected load: 1100W.

Manufacturer: Infastaub GmbH Model: Infa-mat AM 451 S Year: 2015 Type: bag / pocket filter Filtration area: 45 m2 Air volume: 4020 m3/h Housing resistance: up to +/- 35 mbar Fan power : 5,5 KW Soundproof housing Automatic and mechanical cleaning of the filters after the process by a vibratory drive Dust collection: bucket

Inv. Num. : 6043 Type: PRETREATmaker IV Producer: SCHULZE Generated: 2020 Parameters: Printer accessories for digital textile printing

Wastewater cleaning system, drilling water cleaning, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -with: conveyor belt filter -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Description: For sale is a complete Hardening Shop with three Gas Carburising furnaces , two Tempering Air Circulation Furnaces , a Quenching Basin and a Washing Machine . For an overall impression, please take a look at the 3D tour. In the tour you can explore the hall over two floors: LINK TO THE HARDENING PLANT Brief description of the system components 3 x GAS COOLING FURNACE TYPE VCE 200/200 as electrically heated shaft furnace Furnace temperature max.: 1000° C Batch temperature max.: 950° C Batch weight max.: 18 tonnes Useful diameter: 2000 mm Effective height: 2000 mm Clearance diameter of guide cylinder: 2000 mm Oven housing diameter x height: 3450 x 3230 mm Oven connected load: 4 zones of 80 kW each = 320 kW 2 x AIR CIRCULATION FURNACE / TEMPERING FURNACE TYPE LUO 200/200 as electrically heated shaft furnace Oven temperature max.: 750° C Batch temperatu ...

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Used Bottle Washing Machine KLINGER S16 2 90 speed 7000 BPH Model S 16 2 90 Year 1993 Production capacity 7 000 BPH with 2 L bottles Basket plastic with the possibility of washing bottles with max diameter of 95 mm Type of wash suitable for washing glass bottles through caustic baths Dimensions and weight L 9 x W 3 30 x H 3 05 m 19 000 kg Material stainless steel Description of the washing cycle 1st wash Capacity 45 L Maximum allowed operating temperature 150 C Maximum allowed operating pressure 5 bar 2nd wash Capacity 150 L Maximum allowed operating temperature 110 C Maximum allowed operating pressure 2 bar Technical data Nominal capacity 7000 BPH Range of control 4000 8000 BPH Total washing time 7 1 min Time of cycle 8 2 sec Scheduled execution time 16 min Bottles per row 16 Total rows 117 Housings 1600 Loaded rows 100 Preheating Total time 3 min Effective treatment time 2 6 min Sodium ...

Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...

Hyperbaric oxygen therapy (HBOT) is a vital treatment modality used in various medical conditions, including wound healing, decompression sickness, and more. These hyperbaric chambers offer a controlled environment for delivering high-concentration oxygen under increased atmospheric pressure. The 2019 and 2021 models cater to the diverse needs of patients and healthcare professionals, providing top-quality treatment and comfort. Key Technical Specifications: Chamber Dimensions: Both chambers are 90cm in diameter, providing ample space for patients while ensuring efficient pressurization. Software Operation: The 2021 model boasts the latest software operation, offering enhanced control and precision in treatment. TV Systems: Equipped with TV systems, patients can comfortably pass the time during treatment sessions. Oxygen Concentrators: Included oxygen concentrators ensure a stea ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

Wing Mixer Wing Wheel Low Speed Mixer Propeller Agitator Propeller Mixer Xylems Flygt Banana SR Agitator used Low speed, highest efficiency Slow-running Flygt agitators are used when large amounts of liquid need to be stirred effectively and optimally during the treatment process. The result is outstanding efficiency. Manufacturer: FLYGT Type: M18-11-4AL / Banana SR agitator Propeller diameter approx. 1800 mm Wing/propeller length approx. 850 mm Wing/propeller width approx. 420 mm Diving motor Flygt 4430.010 690/400 V; 4.8/8.3 A; 50 Hz; IP68 4.0 kW; 1405 rpm Slow running submersible motor agitators Application: - Activated sludge treatment, conventional treatment, oxidation trench - Water reservoirs - Ice-free keeping - Oxygenation in lakes and ports - Biogas production tanks - Wastewater agitator Total approx. 1800 x 1300 x 600 mm Weight approx. 290  ...

Pad printing package: Machine 1: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 2000 Flame treatment plans: Arcotec FTS 101 P Year: 2000 incl. Cable, burner, connections, devices and wall bracket Machine 2: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 1997 Flame treatment plans: Arcotec FTS 051 D Year: 2001 including cables, torches and connections, devices and wall bracket Equipment: Closed system 4-fold: cliché size 200mm x 100mm Pot diameter 90mm 4 ceramic pots 8 squeegee cups 50mm high 5 squeegee cups 20mm high 3 magnetic holding plates Drying belt: In length, including ceramic heating Flame treatment system (new, unused): HILL WF 10-0 Year: 2004 incl. cable, adapter, connections, burner Ink basin open 4-fold, cliché size 150mm x 450mm, ink squeegee 4 x 90mm Ink basin open, cl ...

Cleaning plant for die casting emulsion, process wastewater treatment, waste water treatment used Manufacturer: VIBROCHEMICA / ROOS & Co Type: 1000 CA/1 Built: 2006 Power requirement: 1 kW Dimensions: approx. M The system includes the cloth belt filter / gravity filter with slitting system and tank, oil skimmer, collection tank with agitator and liquid detectors. The plant is used for the treatment of die-cast emulsion waste water and was in operation until the production site was completely dismantled.

Oven 650C inner1.5x1.5x2m t max 650 Celsius could be various inner size and temperature range PLC Top quality Wärmebehandlungs Kammeröfen Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haub ...

Overview This complete brewhouse was manufactured in 2016 by the German manufacturer Sudhausbau. The plant can be visited and tested at any time, as everything is still connected and in operation. Components Grist mill 1 piece grist mill 2 foot stands with rubber bumpers 1 additional larger hopper Throughput up to 200 Kg/h Brewhouse in stainless steel Cast wort/ brew 2 units steam heated Control system with automatic mashing Switch and control cabinet Completely wired and ready for connection Control cabinet assembly with: 1 x control via touch screen Siemens 9 1 x contactor circuit 0,37 KW agitator 1 x contactor circuit 0,37 KW chipper 1 x contactor circuit 230V/16A steam valve 2 x 24VDC outlet temperature sensor 2 x temperature measurement Analog input 4-20 Hardware and software The control unit with automatic mashing is designed for the connection of the agitator, chopper and 2 temper ...

Enoberg Bottle Filling Monoblock for still water This used Bottle Filling Monoblock model EVF 24 24 6 N S comes with an integrated rinsing filling and capping system and consists of A rotary rinser with 24 nozzles for the rinsing of bottles A rotary filler with 24 valves for the electronic volumetric filling A capper with 6 heads for the application of plastic screw caps or pressure caps Monoblock Bottling with a machine pitch of 150 72 mm Counterclockwise machine Neck Handling bottle conveying system Key features The Enoberg Filling Monoblock for still water distinguishes itself with its compact frame which considerably simplifies operations to manage clean and maintain the machine and ensures substantial savings on space Filling module equipped with electronic meters to ensure precision The working space of the machine is entirely made of stainless steel and glass ensuring a high stand ...

New Filling Monoblock Bertolaso 30 30 4 PET Glass up to 6500 bph Notice Brand NEW Bertolaso monoblock never used Zero working hours Pristine condition The perfect opportunity to purchase a new monoblock at a used price This new Bertolaso 30 30 4 monoblock emerges as an advanced technological solution specifically designed to optimize filling operations for syrups filling system Manufacturer and Model Produced by Bertolaso a benchmark name in the industry this monoblock stands out for its performance and build quality The model specification 30 30 4 combined with its production year 2021 provides crucial information on its current relevance in the bottling solution landscape Speed and Capacity With a speed of 6500 BPH this filling monoblock Bertolaso can handle both PET and glass containers ensuring accuracy and consistency in the filling process Rinser The rinser is equipped with 30 grip ...

Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting edge solution in the liquid thermal treatment sector This machine meticulously designed by UDMACHINES is a model PAS 10000 45 2P E It s distinguished by its operational efficiency and precision setting a new standard in the industry Key Characteristics UDMACHINES known for their innovation manufactured this Used Flash Pasteurizer in 2022 making it a relatively new addition to the market Importantly it boasts a remarkable operational capacity of 10 000 liters per hour This capacity is a testament to its significant efficiency especially in handling large volumes for treatment Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method a critical feature Specifically it rapidly heats liquids to 90 C This process is not ...