Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484972
New in: 1995

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This Traub TNC 42/65 DGY Lathe was manufactured in the year 1995 and has 13000 production hours. It is equipped with a TRAUB TX8F control unit. The machine has a spindle speed of 4000 rpm.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163485007
New in: 2007

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This TRAUB TNC 42/65 Lathe was made in 2007. There are 2 units available.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163676786
New in: 2002

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

X-axis: 140mm, y-axis: +/-35mm, z-axis: 450mm, max. turning length: 450mm, spindle clearance: 42mm, max. rotational speed: 5600/min, max. clamping diameter: 42mm, control: TRAUB System TX 8H, length: 4250mm, width: 2076mm, height: 1917mm, weight: 4.8t, spindle hour reading spindle 1/ 2: 63,484/ 48,015h, equipment: collet chuck Hainbuch left spindle/front side, collet chuck Hainbuch right spindle/rear side, tool probing device, part ejection device counter spindle, parts conveyor belt, bar loader Traub Stamag DNH42, machine status light, tool load monitoring, coolant system 12bar, lateral chip conveyor, with accessories and 40 tool holders, 10 of which are driven, has been regularly maintained by the manufacturer, an on-site inspection is possible.

Category: 102 lathes
Latest update: 02.03.2024 add to watchlist
approved
dealer
item-No.: 152427958
New in: 1989

used

Location: Land-bg

add to watchlist

CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg

Category: 102 lathes
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 119625818

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
VS

add to watchlist

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Category: 102 lathes / CNC Turning Automatics
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794230

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Program controlled lathe type TRAUB type TF 60/140Machine -No: 194 Year 1976Max. Bar passage: 60 mmMax. Chuck: 120 mmMax. Clamping diameter: 130 mmSwinging diameter: 190 mm21 spindle speeds: 21 - 2000 rpm.switchable speeds: 4 right 2 leftSled trails: 125 mm along: 70 mm acrossinstalled power: 14 kWWith- Copying device- sweeping device- hydr. tensioning device- bar feed- 2 vertical slides- 2 horizontal slides- collet set- Three-jaw lathe chuckused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 110 accessories for machine tools / Accessories
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 162733192

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: 45138 Essen Land-de
VS

add to watchlist

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Category: 102 lathes
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 163104456
New in: 2008

used

check Seller: VIB GmbH & Co.KG
Location: Land-de

add to watchlist

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Category: 102 lathes
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 163194692
New in: 2003

used

check Seller: VIB GmbH & Co.KG
Location: Land-de

add to watchlist

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Category: 102 lathes
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 163194693
New in: 2006

used

check Seller: VIB GmbH & Co.KG
Location: Land-de

add to watchlist

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Category: 102 lathes
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 163194694
New in: 2004

used

check Seller: VIB GmbH & Co.KG
Location: Land-de

add to watchlist

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
item-No.: 163469324
New in: 2001

used

Seller: Exapro
Location: Land-tr
Price: 41.500 € add to watchlist

Machine is in good condition Max bar diameter mm. 36 Spindle speed rpm / min 6300 Machine is in good condition

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484889
New in: 1991

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This Traub TNS 26 DGY Lathe was manufactured in the year 1991. It is equipped with a Traub TX8F control unit. The machine has a spindle speed of 7000 rpm.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484945
New in: 2000

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This TRAUB TD26 Lathe was built in the year 2000. The machine has a turning diameter of 25 mm.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484966
New in: 1992

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This TRAUB TNS 60 lathe was made in the year 1992 and overhauled in 2020. The machine has a turning diameter of 180 mm and a turning length of 490 mm.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484994
New in: 1983

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This TRAUB A25 Lathe was manufactured in the year 1983.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163485033
New in: 1986

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This TRAUB TK42 Lathe was made in 1986.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163493310
New in: 1991

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This TRAUB TD26 Lathe was manufactured in the year 1991. 5 units are available.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156965409
New in: 1990

used

check Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen Land-de

add to watchlist

turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163676798
New in: 1978

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Connected load: 2.6kW, length: 700mm, width: 1700mm, weight: 710kg, including bar feeder IEMCA MINI BOSS 325 CNC/ 32, with documentation, on-site inspection is possible.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163676799
New in: 1984

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Max. turret slide stroke: 100m, fast retraction stroke: 50mm, max. through-feed radius: 216mm, max. through-feed width: 110mm, connected load: 0.75kW, with bar feeder and documentation, on-site inspection is possible.

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817373

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Category: 102 lathes / CNC Long Turning Automatics
Latest update: 19.01.2019 add to watchlist
approved
dealer
item-No.: 158072218
New in: 2013

used

check Seller: ifa technologies s.r.l.
Location: Land-it

add to watchlist

CNC automatic lathe Traub TNL 32-7 • Version TNL32/TNL32K alternating mode • Control TX8i-s • Main spindle passage 32 mm, with C-axis • Counter spindle incl. partial hollow stress • Revolver top X/Y/Z/H axis: 10 shots dual drive • Revolver bottom X/Y/Z/H axis: 9 shots total drive; Counter spindle sep. Drive • RAPP 8-fold; Total drive 3 tools IK • Workpiece deflection unit with linear gripper • Coolant supply 3 bar • Coolant supply 8 bar • Hinge belt chip conveyor, discharge height 1000mm • Glass scale X-axis turret top/bottom • Compact belt filter for cooling lubricant: filter fineness approx. 30-40 μm • Bar loading magazine FMB LSK 38, for rods 3.2 m (original price at that time 340.000,- €uro)

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218150

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Technical data Max. work piece diameter: 15 mm Turning length: 70 mm Spindle hole: 15 mm Max. treading diameter: 8 M (Metric) Production capacity: 28 - 2100 pce/h Spindle speeds: Number of spindle speeds: 12 from: 900 rpm up to: 6500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Pick-up attachment Gripper device Vertical support Bar loader number of bars: TRAUB Type: B3000 Length of bars max.: 3200 mm Slotting attachment Drilling tailstock Workpiece counter Protective cover

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218335

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Key data: 175 Traub, 650 TX8i-S

Turning diameter: 175 mm Turning length: 650 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 12   CNC Brand: Traub CNC Model: TX8i-S X-Axis:          175mm Y-Axis:          40mm Z-Axis:          650mm Spindle bore:    65mm Speedrange:      5000Rpm Spindle power:   24kW Subspindle speeds:7000Rpm Subspindle bore: 42mm Subspindle power:28kW Length:          6.500 mm  Width:           2.400 mm  Height:          2.400 mm  Weight:          10.000 kg  Upper left turret: Positions 10 Driven station 10 X/Z Stroke 175 / 650 Y Stroke 40 Vdi 30 Speeds 6000 Rpm Lower right turret Positions 10 Driven station 10 X/Z S ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online