transfer system used for sale

Manufacturer: Venjakob Model: VEN SPRAY ONE Type: Automatic flat-line spray coating machine with dry filter extraction Control: 15-inch touch screen PC with recipe management system Compliance: CE-certified, user interface and documentation available in local language Technical Specifications - Overall dimensions (L x W x H): 4,084 x 4,000 x 2,600 mm - Working width: 1,300 mm - Feed speed: 1 to 4 m/min - Gun traverse speed: 0.4 to 2.0 m/sec, infinitely variable (max. 25 double strokes) - Electrical connected load: 11 kW - Maximum supply air: 7,000 m3/h - Maximum exhaust air: 7,000 m3/h - Compressed air consumption: approx. 100 NL/h (varies with equipment) - Minimum workpiece size: 250 mm x 25 mm x 6 mm - Maximum workpiece size: unlimited length x 1,300 mm width x 50 mm height --------------------------------------------------------------- Please also note that the machine is not  ...

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible.

A row based pallet flow racking system Jungheinrich with roller tracks is available. Load carrier: Euro pallet, rack bay length: 2000mm, max. bay length: 2700mm, channel width: 2000mm, rack height: 2000mm, roller cassette height: 1450mm, beam pair height: 550mm, max. load level/channel: 5200kg/400kg, roller modules: 3/level, max. bay load: 200kg, roller track channel length: 2550mm, roller module inner width: 872mm, roller module installation width: 947mm, roller diameter: 60mm, roller pitch: 175mm, max. roller load capacity: 240kg. Documentation available. An on site inspection is possible.

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Manufacturer: Mahlo Model: Webpro M Year of Manufacture:2021 Power supply: 230 V AC Electrical connection: 1L / N / PE Frequency: 50/60 Hz EMC interference class: G Protection class: IP43 Product: Inline quality measurement system QUALISCAN QMS-12 by Mahlo Function: Inline system for continuous measurement of thickness and basis weight during production. Sensors are mounted on a traversing frame and move left to right across the material to measure over the full production width and length. Measured parameters: Thickness Basis weight Additional parameters possible depending on configuration Measurement principles: Thickness measurement by laser triangulation, double-sided measurement of top and bottom surfaces Measurement range: 0–100 mm Reproducibility: ±25–50 µm Basis weight measurement by X-ray transmission X-ray intensity is reduced according to material mas ...

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.

Manufacturer: Samco Model: FlexLiner II Year of Manufacture: 2018 Type of Machine : UCP plasma machine The samco-ucp FlexLiner II is a production type plasma cleaning system designed for surface cleaning of various types of leadframe packages. This system operates with a remote plasma source in the downstream process mode. The plasma is generated by RF power in the source and then injected into the process chamber through a shower head. Dimensions: 1,520 mm (W) x 1,410 mm (D) x 2,130 mm (H) Key Features and Benefits - Single substrate production equipment for various types and dimensions of substrates and magazines up to 300 mm x 300 mm - Gentle handling with minimal movement of substrates and magazines - Touchscreen GUI for user-friendly, intuitive operation - Multiple sensor controls for highly reliable operation - High throughput due to simultaneous (un)loading and plasma proces ...

Used plasticizing system, diameter 120 mm. Technical parameters: - screw diameter 120 mm - barrel diameter 120 mm L/D 33 mm - 6 heating sections/heaters with a power output of 4300 W - complete set of fans with housings - double degassing section - complete power supply for heaters and fans. The plasticizing system is in good condition, with a capacity of approximately 400 kg/h.

Support machine with stackerManufacturer: BMTEC GmbHTyp: Care unit stackerYear of construction: 20093x400V 1kWThe condition: Defect must be completely checkedDetails see pictures.

An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible.

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Bread roll system Stainless steel clad digital control consisting of: Head machine type K5 Weight range up to 110gr Settling device with long-rolling station Trigger length adjustable 60/40 to 60/100cm mobile - Bakery condition/not cleaned

Kemper Sprinkler Dough Spreader with Turntable Manufacturer : KemperFor sesame poppy seeds etc.wCondition: used, baker's conditionMaterial: stainless steelwith turntableon wheels, mobile For details see pictures.

König Mini Rex 4000 Roll Plant  Product descriptionManufacturer: KönigModel: Mini RexType: 4000 TR/G-S SKG58+RK58Year of construction: 2007Roll plantModel: G 2000Type: SA2König G2000 Compact plant for round-knitted, stamped, oval or folded-long-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeriesCompact pre-proofer system with Mini Rex Futura head machinemax. Hourly output in proofer operation: 2,000-2,500 pieces, infinitely adjustable for higher output

Bread roll line König Mini Rex G2000 Â Product description Manufacturer: König Model: Mini Rex G2000 Year of construction: 2003 Condition: used, functional, bakery condition - please thoroughly before use König G2000 Compact system for round-knitted, stamped, oval or wrapped-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeries compact pre-proofer system with Mini Rex Futura head machine max. hourly output in proofer operation: 2,000-2,500 pieces, infinitely variable

Roll line Gulliver IRIS 20 Manufacturer : Gulliver Model : IRIS 20 Type : Special-R Year of construction : 2000 Long dough laying belt / infeed belt LED control Stepless cutting length adjustment Machine is mobile with Mehler inlet belt and discharge belt Foldable Weight range: from approx. 25 to 1200 gr depending on the type of dough Connection 400V, 1.5 kW, 16A-CEE Plug Dimensions: L 2200 x D 670 x H 1700 mm Tested and cleaned

Manufacturer : LippeltType : Rustica MiniYear of construction : 98with 3 rollers400 Volt 1,1kWDetails see picture

Manufacturer : Gulliver Model : IRIS 20 Type : Special-R Year of construction : 2006 Long dough laying conveyor / infeed belt LED control Stepless cutting length adjustment Machine is mobile with Mehler inlet belt and outfeed belt can be folded up Weight range: from approx. 25 to 1200 gr depending on the type of dough Connection 400V, 1.5 kW, 16A-CEE Plug Dimensions: L 2200 x D 670 x H 1700 mm  Details see picture

â Product description âœ"Manufacturer: KÖVY âœ"Type : KM4 Head machine Fortuna âœ"Manufacturer: Edmund Schröder âœ"Type : Fortuna KM âœ" 4 rows âœ"Condition: used âœ"We have 2 pieces in stock Details see picture

Kemper Quadro Round Roll Plant Manufacturer : KemperType : Quadro Round Type : AByear of construction : 10/20015 Series, for square and round rolls with settling and spreadingStainless steel, 400 Volt , 50HzTested and cleaned

Bread roll line Eberhardt Vario-Stars / Primo-Starâ Product descriptionâœ" Manufacturer: Eberhardtâœ" Type: Vario-Star / Primo-Starâœ" Condition: used, Bakery condition

Compact machine König Artisan SFR TS Bakery condition The machine needs to be overhauled or completely checked Manufacturer : König Type : Artisan SFR TS Year of construction : 2008 Touchpanel control Power approx. 6000 pieces/str. Stainless steel version Connection 400V, 16A-CEE plug with lifter Bakery condition Details see picture

 Brötchenanlage Lippelt Mini Rustica Manufacturer : Lippelt Type : Mini Rustica Year of construction : 99 with 2 rollers 400 Volt 1,1kW Baker condition We have 2 pieces in stock  Details see picture       

Head machine Fortuna KM Manufacturer : Edmund Schröder Type : Fortuna KM 4 rows Weight dough piece 35gr. - 85gr. suitable for wheat, mixed wheat, mixed rye and special doughs Baker's condition See picture for details

Head machine WP Multimatic MUCHcreator : Werner &, PfleidererType : MUC 5approx. 8000 pcs/hWeight dough piece 35gr. - 85gr.suitable for wheat, wheat mixing, rye mixing and special doughsBakery conditionDetailÒ's see picture

Bread maker Kemper Quadro Roundnur for square rollsManufacturer: KemperType: Quadro RoundYear of construction: 05/20035 rows, for square rollsStainless steel, 400 volts, 50 HzWithout belts Baker's condition

This used PY-D continuous distillation unit converts waste engine oil, pyrolysis fuel oil, and heavy crude oil into non-standard diesel fuel with a high yield of 80–90%. The horizontal-type reactor operates at normal pressure using a hot-air heating method and cycle-water cooling, making it a reliable, low-maintenance solution for industrial waste oil recycling. Emission control is handled by a new DE-sulfurization smoke scrubber system. Full Technical Specifications - Equipment Model: PY-D - Suitable Raw Materials: Waste engine oil, Pyrolysis fuel oil, Crude oil - Structure: Horizontal Type - Daily Capacity: 5 – 6.5 MT - Work Pressure: Normal Pressure - Oil Yield: 80% – 90% - Power Consumption: 18 kW/H - Cooling Method: Cycle water - Condensers: 4 pieces of Vertical condensers - Emission Treatment: DE-sulfurization Smoke Scrubbers - Heating Method: Hot Air - Type of Installation ...

A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.

 Roll line for special rolls Kemper  Manufacturer : Kemper Type : Quadro FIT Year of construction : 10/1999 with Mohner stainless steel Mobile machine, for all special rolls Production of square dough pieces with rollers 230 Volt, 50Hz Tested and cleaned  for more details please see picture Shipping costs please ask for

Machine Type: Ultrasonic Cleaning Device Make: Finnsonic Type: MC-360/III Year of Make: 2002

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

Goedhart DVS 84637 Internal volume 150 dm3 TS +55/-5 C PS/PT 28/40 bar Fluid R404A

A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.

A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption. Expected to be available 2026.

Dimensions (L/W/H): 1817 x 578 x 2115 mm Filter capacity: 4,4 m² Number of filters: 2 St. Number of dust containers: 2 St. Weight: 74 kg Dimensions (L/W/H): mm : 160 mm : mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A universal batch mixer WP is available. Volume: approx. 140l, machine dimensions X/Y/Z: approx. 1500mm/900mm/1200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.

Silo plant with a total gross capacity of 90 m³, consisting of 3 steel round silos of 30 m³ each. Usable volume per silo: 25 m³, diameter: 3,500 mm, total height: 5,850 mm, cylindrical height: 2,150 mm, cone height: 2,735 mm, cone inclination: 62.2°, outlet height: 965 mm, outlet cross-section: DN 250 mm. Silos have always been under roof and can be viewed in their assembled condition.