transfer system used for sale

For sale is a fully functional franking system Francotyp PostBase One in very good condition. Equipment: Automatic letter feeder Dynamic Scale Static Scale The system is technically tested, maintained and immediately ready for use. Viewing and test run possible by arrangement.

Min. plate format: 240 x 240 mm Max. plate format: 676 x 760 mm - SCL - MCL - Inline punching - Stacker PST 26C - incl. RIP

Dematic conveyor system Accumulating roller 15000-750-690 RA2458 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 15000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation slot size: 750 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.35 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side gui ...

CANALI log band saw system model BBS. V - PACIFIC - 1800 Type 555 Refurbished 2024 CANALI pneumatic clamping carriage with 4 clamping claws, speed 6-120 m/min., 100 kW 3 log turners, 4 ejectors, cutting thickness adjustment 150 mm/sec. Log feeding station with insert, hole pull with model cross conveyor complete sharpening room equipment Iseli stellitizing machine SAA, Iseli leveling machine EBW-E, rolling machine with straightening bench, Band saw sharpening machine and leveling machine Electrical cabinets and control panels, control cabs Refurbished 2024

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless  ...

Year of manufacture 2005 Stitching, folding and cutting unit 304 QSM 3-side trim Shed display Marking device Delivery date: immediately Price on request. Worldwide delivery & installation.

Floor Slabs (Filigree) Carousel VOLLERT, Control: PTA-WIGGERT Capacity approx. 800m2/ day Steel pallets 2,4 x 13,5 m, 43 pieces Manufacturer Nuspl and Schwinghammer Year of construction 1994 Complete steel processing (FILZMOSER) Including longitudinal wire straightening machine with 6 wires and hyperbolic rotor, diameter 6-14 mm Cross wire roller straightener diameter 8 mm Producing of spacers on cross wires Lattice girder processing, measuring and cutting equipment Steel robot for laying bars and lattice girders Cleaning and plotter, Weckenmann Concrete spreader, Weckenmann Vibration station SKAKO Curing chamber with fully automatic restacking crane VOLLERT Control system completely renewed in 2014 by PTA Wiggert Master computer is integrated

An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible.

Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"

Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description: A line consisting of: Freezer tunnel TVI CBF 1000. SCHIESSL tunnel feed unit with Bitzer compressor. TVI GMS 500 slicer.

REF-2476 ULMA ETNA HITECH VERTICAL FORM-FILL-SEAL MACHINE Vertical form-fill-seal machine (VFFS) Manufacturer: ULMA Model: ETNA HITECH 280X Machine no.: 60281145 Year: 2009 Power: 7kW Voltage: 400V Overall dimensions: width 150 cm, length 220 cm, height 200 cm.

current intensivity: 475 A water cooling unit: ja weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame.  ...

Para. Annex Stool PolytechnikType MultiStar JP5 Year of manufacture 2012 Vol.20.000 m³ Motor 30 KW with briquetting press BrikStar c-3 18 Negative pressure

Technical data: Bowl capacity: 25 kg Production capacity: 90 kg/h Power: 3.5 kW | Voltage: 230/400 V – 50 Hz – 3 phases Dimensions: 570 × 740 × 1560 mm Heated vibration conveying for uniform chocolate processing Stop pedal for flow and timed dosing system Removable screw agitator for quick and thorough cleaning High-precision temperature control via sensors and control board Suitable for the production of two-component chocolate The GAMI Diva 25 2i combines high performance, reliability and user-friendly design, making it ideal for professional chocolate tempering and artisanal production.

The Viscom S3088 ultra gold is a high-performance 3D Automated Optical Inspection (AOI) system designed for high-volume electronics manufacturing that requires maximum throughput and precision. PCs replaced in 2024 to new ones Top Performance Specs - Inspection Speed: Up to 65 cm²/s, making it ideal for the highest throughput demands. - 3D Sensor Technology: Powered by the XMplus high-performance camera module. - Camera Configuration: Features up to 9 cameras (including orthogonal and angled views) for shadow-free 3D inspection. - Image Field Size: $50\text{ mm} \times 50\text{ mm}$. - Resolution: High-resolution 3D analysis down to 10 µm (orthogonal) and 0.5 µm (Z-axis). --------------------------------------------------------------- Key Technical Capabilities - Component Range: Reliably inspects the latest miniaturized generations, including 03015 components. - Defect Detectio ...

A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible.

Stock number: D1119, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., Item: Non-driven conveyor, Standing: 2 pcs. legs, Rollers: Ø 48 mm plastic, Dimensions: L 1500 x W 420 mm , Manufacturer: SOCO SYSTEM A/S

Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filtertechnik Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction System / Filter System Air volume flow: 2000 m³/h Weight: 1000 kg Control: Herding MP 12 Filter cleaning: pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: available Number of units: 2

Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven

A Datron dosing and dispensing system for adhesive and sealing materials is available. Design: gantry design, Y-axis drive: double-sided, travel X/Y/Z: 520mm/650mm/240mm, gantry clearance: 200mm, dosing and positioning speed: 16m/min, repeatability: +/-0.02mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/1950mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

Motor output: 3 kW Filter capacity: 6 m² : 3500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10000 m³/h Weight: 700 kg Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 870 kg Motor output: 15 kW : 12,500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand pallets rack storage system Mfc.: STAMH GROUP Type: 65 Lanes Built: TBA Dim. of pallets: 1.0 x 2.0 x 1.4 m – W x L x H Pallet Weight: 120-600 kg Gravity Roller Conveyor – Rack mounted lane for 3 PP Storage capacity: 195 pallets Total load capacity: 120 900 kg Requested space: 15.25 x 21.56 x 9.05 m – L x W x H Type of forklift truck to be used: Min. working main aisle: 4.4 m Min. reach height: 7.7 m

: 8500 m³/h Motor output: 11 kW Filter capacity: 47 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This used riveting system from Gesipa is equipped with a spring-loaded release system and comes with Compressed air operated in a range of 5.00 bar to 7.00 bar. Comes with a 17/24 mouthpiece. Blind rivets up to up to 5 mm Ø all materials and up to 6 mm Ø aluminium/steel (max. mandrel Ø 3.2 mm) and offers a Setting force of 11000N.

Motor output: 7,5 kW Weight: 450 kg : 6500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter capacity: 121 m² Air consumption: 13200 m³/h ventilator: 15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 280 kg Motor output: 4 kW : 4000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: VISCOM Model: S3088 III Year of Manufacture: 2011 Weight: 750kg Last annual maintenance by Viscom: June 23, 2025 With a loading/unloading machine: - Manufacturer: ASYS - Type: AES 03DK - Year of manufacture: 05/11 - Weight: 335kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Product Overview: EDA Industries SM 24 FH 150 Description: The EDA Industries SM 24 FH 150 is a high-performance Burn-In Oven System designed for reliability and stress testing of semiconductor devices. This 2018 model is engineered to simulate extreme operating conditions, helping to identify infant mortality failures in integrated circuits and power modules before they reach the final consumer. Technical Specifications: - Manufacturer: EDA Industries - Model: SM 24 FH 150 (SM24 / SP40 Series) - Year of Manufacture: 2018 - Application: Semiconductor Burn-in / Reliability Testing / Life Cycle Testing - Max Operating Temperature: 150°C (Standard) - System Type: Thermal Chamber with Electronic Testing Interconnects Physical Dimensions: - Width: ~79.13 in (201 cm) - Depth: ~86.61 in (220 cm) - Height: ~78.74 in (200 cm) - Weight: ~1,800 lbs (816 kg)

This work piece handling system was manufactured in 1999. Consider the opportunity to buy this ROMMEL BM600S work piece handling system. It features a conveyor belt and BE unloader, making it suitable for efficient material handling tasks. Reach out for further details regarding this machine.

Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

DUMOULIN dosing turbine, for small batches or for development., 2 tanks sold with the machine: 15 and 30kg, System NEP, Waterproof? No, wait - The input is Pompe perilstatic Waston Marlow which appears to be a product name. Likely translation: Perilstatic pump Waston Marlow., Sold without its power cabinets, fan, and filtration system

This 6-axis CLOOS QIROX QRC-350-E was manufactured in 2020. It features a maximum reach of 1550 mm and a payload capacity of 6 kN, making it suitable for various robotic welding applications. The system includes a welding positioner and a laser system for enhanced functionality. If you are looking to get high-quality robotic welding capabilities, consider the CLOOS QIROX QRC-350-E automation system we have for sale. Contact us for further details.

WALTER BRUCKS dosing turbine, Stainless steel, With ventilation and electric heating, Speed variation, Rotation alternation, Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Revolutions per minute: 9 - 26 , Last use: December 2020, Impeller material: stainless steel, Rotations per minute: 9 - 26 , Last used: December 2020

Elec: 400V, Heating: no, Turbine diameter (mm): 1200 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1350X1200mm H2300mm, Impeller material: stainless steel, Rotations per minute: 9 - 26, Last use: December 2020

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

FD84 S FOBA Laser System Year of construction 2003 Used, not tested, without pump arrangement Windows 2000 Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected

FD84 S FOBA Laser System Year of construction 2002 Used, not tested, without pump arrangement, without PC Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected

Laser system 50 watts, FOBA DP 50 for marking and engraving with focusshifter, focus distance from 426 mm to 669 mm, deflection unit Raylase TS10 and 163 mm lens, Windows XP with 1.4 GHz, 512 MB RAM, Termotec cooler built in 2005, used, ready for use, cleaned and tested. Warranty 3 months, excluding the pumping arrangement,

Manufacturer : Prefamac Chocolate Tempering, Melting & Forming Machine Model : probably MUO 80 Year of construction : unknown electr. Values : 400 V 50 Hz 3Ph Capacity : ~80kg User capacity : Machine dimensions : approx. 1150 x 780 x 1600 (lxwxh in mm) Weight : approx. 120 kg Details : Stainless steel construction. Electrically heated and thermostat-controlled Swivel agitator installed in the tank With vibrating table AISI 304 stainless steel structure, mounted on a frame with castors Lifting wheel made of food-safe plastic Good used condition Application; Melting, tempering and pouring of chocolate, Coating of biscuits. We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Screen 4300 E year 2006 16 diodes Plate Winding Cycles 136.843 exposure time 7,835 h PC with RIP Harlequin good condition

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

FRAMAX CIP SET Portable CIP Set - Second Hand Type FRAMAX 0500X2 Manufactured: 2019 Two x 500 litres approx. tanks. The machine requires a supply of Steam and compressed air plus three phase power : INSTALLED POWER 2 KW POWER SUPPLY 400 VAC 50HZ+PH+N+E AIR PRESSURE BAR 8/10 HEATING STEAM PRESSURE BAR 2.5 WATER PRESSURE BAR 2.5/3.5 UTILITY CONNECTIONS WATER 3/4” M PNEUMATIC AIR 3/8” F STEAM 1/2” F CIP DELIVERY DN 40 F CIP RETURN DN 40 F DRAIN DN 40 F Machine Dimensions : LENGTH 1200 WIDTH 1600 HEIGHT 2150 WEIGHT 350 Kg For more information and more available stock please visit us at - advancedbrewing.co.uk