transfer system used for sale

Laser welding machine with 200 watt laser power - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Composite system with 1 Bitzer compressor Make: BITZER Type: 4G-20.2-40P Displacement: 102.1 m³/h with 1 Bitzer compressor Make: BITZER Type: 4GE-23Y-40P Displacement: 102 m³/h and with 1 Green Point compressor Make: Green Point Type: 4G-20.2Y-40P Displacement: 101 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

min. plate size: 240 x 240 mm max. plate size: 676 x 530 mm max. exposure format: 656 x 530 mm Plate thickness: 0,15 - 0,3 mm - Hand feed - without bridge - Developing machine - Stacker

new ultra-light construction site roll forming machine for double standing seam, with dismountable sides, 2 modules can be used for underfunding, as well as another Tool set for the production of double-sided overlays, so ferves can be used can be manufactured in a single pass (additional tool sets are an option), Sheet width: 720 mm Sheet thickness steel: 0.65 mm Sheet thickness aluminum: 0.8 mm Machine weight: 157 kg Dimensions: 1200 x 1400 x 560 mm Total power requirement: 220 V Colour: turquoise/white Profile height: 25 mm it Width adjustment Roll forming speed: 9 m/min

NNP cooking kettles Stainless, cooking and mixing system on skid, two 350L mixing tanks, with Alfa Laval GM1 centrifugal pump and Randolph 600 series peristaltic pump, jacketed tanks, adjustable temperature and variable speed pumps, 3Ph

Max. plate size: 676 x 530 mm Plate thickness: 0,15 - 0,3 mm - Hand feed - Bridge - Developer unit - advant PST 26 compact Stacker - incl. Shooter - incl. RIP

Optimize your production with our automatic material feeding system for 10 machines! Components: Stainless Steel Silos: Quantity: 4 Capacity: 70 m³ each Year: 2000 Side Channel Turbine: Power: 7.5 hp (5.5 KW) Electrical panel: Additional equipment: With PLC and display Pipeline & Receivers: For all 10 machines Ready to get started? Contact us directly! Send us a message by WhatsApp to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Bench scale, running weight scale, 0 to 6000 g

Stand height approx. 5000mm Longitudinal beam approx. 6000mm Load capacity 125 kg Working dimensions see pictures

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

In good condition CO2 installation & cold room build in 2021. Cold room temperature +-4°C and a evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and a isolation value of RC 5,21. Further the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machineset and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a low-temperature Bitzer 2HSL-3K-40S & medium-temperature Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a D ...

ID3345 Landbanden/Country conveyor belts year/Baujahr 2015 Land conveyor system consisting of:  x 1400 mm x 190 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h 1 x 1400 mm x 165 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h Land conveyor system consisting of: 1 x 1400 mm x 190 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h 1 x 1400 mm x 165 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h

Stuffing machine Eberhardt 5 x 7 Kaiserstüpfler, star rolls with 5 stud boxes Machine mobile Connection 400V, 16A-CEE plug Machine Many more bakery machines in stock!

Bakon Apricot/Fondant Coating Belt Line Year of construction 2000 Continuous flow device, with round belt spreader belts with instantaneous water heater system and jelly instantaneous water heater Working width 550mm Apricot station with airless nozzles Fondant station with splash device and nozzles for zigzag pattern with drying tunnel with melting tank for approx. 100l fondant with spared material pump - Bakery condition not cleaned - partially. in need of overhaul

Key data: 30 m³/min, 7

Type: ZT 30 Year of Make: 2000 Power (kW): 30 Pressure (bar): 7.5 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; Electronics industry; Medical & Healthcare

Bertolaso Model A900N Stainless Steel Caps Elevator Feeding System Hopper Blower Power: 380 KW

Theisen & Bonitz tb sprint 310 VP, machine number 310 VP 2784, year of construction 2001, 10 stations, format min. 65 x 100 mm - max. 350 x 500 mm, flat pile feeder, stacking height 30 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

GIF Kitchen Ventilation Ceiling Ventilation Ceiling System Kitchen ventilation for commercial kitchens The optimal solution for kitchen ventilation, commercial kitchens and the food industry. The best alternative to cooker hoods The GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / Hotels • Homes for the elderly/disabled and children's • Troop accommodations, field kitchens • University canteens, school kitchens • Inflight catering •Correctional • Public institutions Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete wall-to-wall solution, including large exhaust and supply air fields, lighting and compensation surfaces with an installation height of only 200 mm. The use of the ceiling cavity as a pressure chamber according to VDI 2052 enables the implementation as an "open ...

Continuous flow device, with round belt spreader belts Working width 550mm with instantaneous water heater system Fondant station with splash device with melting tank approx. 200l with separate transfer pump (built in 2006) - Tested and cleaned immediately available

2 identical evaporative condensers with 6 fans each with frame standing on a roof Year of manufacture 2002, in the best maintained condition is written as parked on the frame

Make: KOMFOVENT Type: KLASIK-RECU-9-IS3-C-18.5/15.0-F7/M5-X-X-CW Year of Make: 2014 Capacity: 25,300 m³/h Current consumption: 63.8 A very good condition, as good as new facility Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Key data: 273 m², 5000 kg, 7300 mm

Volume flow 25,000 m3/h Exhaust fans 2x

All Rip and Software Included, 2400 dpi, Formats: Min. 324x660mm, Max. 370x830mm, PST 26 Compact Stacking Delivery, 16 Diods Laserhead, Infrarot 830nm thermal, chemical free thermal CTP with Autofeeding

used head machine Kemper Quadro Round, in bakery condition, cleaned, run to the end, 5 rows, No. 660052, 25 A, 50 Hz, 400 V, sale as seen

Rotofeeder end feeding system Fleetwood type: FSI including transport system from magazin to the Ferrum can seamer distance way approx. 2.800 mm complete reconditioned and fixed for can ends 202 including PLC Siemens S7

Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced

REF-2527-2528 INDUFLEX ICS II TWIN CAP SORTER AND FEEDING SYSTEM 2 UNITS IN STOCK Screw cap sorting and feeding system composed of a twin hopper and a twin elevator conveyor. The elevator transports the caps towards the outfeed in the correct direction and position by means of Jetstream conveyors. Manufacturer: INDUFLEX Model: ICS II Serial numbers: 6026 / 6031 Year: 2006 Throughput: 2 x 12,000 caps/hour Power supply: 230-400 V / 50 Hz / 3Ph+N+PE Electricity consumption: 32 kVA Compressed air pressure: 0.63 Mpa / 6.3 bar Overall dimensions: width 1,450 mm, length 3,100 mm, height 2,700 mm Adjustable-height outfeed Weight: approx. 750 kg

1 large evaporative condenser plant, manufacturer Thermofin GmbH Prod. No. 703543-010-001; Type: TACD=90-1-29-N B%. Year of manufacture 2008 permissible Operating pressure 21 bar Curb weight 4,500 kg with frame and walk-through platform all around standing on the roof, with frame for sale In very good maintained condition, immediately available

Diebels Recyclingmaschinen_Kabelgranulieranlage RMH 2 D Granulator: 11 KW Connected load: 19.6 KW Weight: 2,450 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Diebels Recyclingmaschinen_Kabelgranulieranlage EUREKA 15 Granulator: 15 KW Connected load: 22 KW Weight: 2,500 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Diebels Recycling Machines -Cable pelletizer EUREKA 15 LINE Granulator: 11 KW Pelletizing system connected load: 22 KW -Conveyor system with magnetic head roller Drive: 0.37/400 V -Pre-shredder RMR 170/400 Drive: 12 KW with 0.75 KW Hydraulic Gate Valve Pelletizing system Eureka 15 used system overhauled from year: 2006 Conveyor system with magnetic head roller New machine Pre-shredder RMR 170/400 new machine Electrically configured with power control Capacity with pre-shredder up to approx. 280 kg/h

1 cooling tower system, manufacturer Karlsruhe with 1 fan, type KD2/18-34-3 Engine BG 180C 220 kW with 1,460 rpm Brik No. 8222, power 1200 kW stands on the roof, not dismantled with steel frame and stand frame rust removal Withdrawn from production at the end of 2023

OSAMA 2-roller glue spreader mod. S2R1300 CM 130 – CE compliant – used - Glue magazine accessory - Glue cleaning accessory - Chiller (Thermal Conditioner) Vinyl, urea, polyurethane glue refrigeration system and other types of adhesives for 2 and 4 roll gluing machines. This device is necessary to keep the temperature of the glue between rollers constant and guarantee the established pressing times even in cases of high temperatures in the workplace, respecting the quality of the finished product. - CLT-A mixer (Two-component automatic glue feeder) Automatic mixing and feeding system for roller gluing machines of two-component vinyl and urea glues with catalysts, sulfates and isocyanates. This device is necessary for in-line or continuous production, using two-component glues that require mixing at the entrance of the gluing machine. It includes a mixing head mounted on the ro ...

1 horizontal cooling water stacking tank, insulated with black plastic mats Contains 41.000 l Manufacturer Behälterbau Bremen, Fabr. Item No. 223/216-L with various centrifugal pumps, all controlled by frequency converters. with complete piping with control cabinet system was used for cooling water production for PET bottle blow molding machines. The entire system is in perfect condition, not dismantled.

Laser type Gen3 / 160 - with 64 diodes current meter reading: 73,556 exposures. Laser exposure time: 1,830 hours Outer Drum Computer-to-Plate Platesetter for Thermal Plates 830nm Throughput 17 plates/hr at 2540 dpi Bacher tightening punching distance 425 mm Panel formats 240mm x 240mm up to 670mm x 760mm With software Prinect MetaDimension 10 ( License Service Dongle ) Software Prinect, Signastation (2012), Format 75, Version 11, M-Kit Prepress Press, Edition 2011 Workstation monitor mouse complete with accessories with documentation DVDs and - Plate washout station C85

Glotter Metal Temperature control unit with chocolate pump and vibrator - Chocolate pump GM 950 - for pouring, filling or coating -Stainless steel - Vibrator EM 3045 - Tabletop appliance with drainer tray - With manual regulator - Temperature control unit with water bath heating - 20 to 50°C adjustable - Container with 15 liters - Ready to plug in Connection 220V, 1500 Watt Used machine cleaned More chocolate machines in stock!

Vario baker for 13 tartlets Stainless Steel Tabletop Device Temperature adjustable up to 300°C Baking time adjustable Tartlet 75 mm Connection 230V, 3.2 kW Dimensions: 430 x 400 x 380 mm, WxDxH Used device cleaned Many more machines in stock!

Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition

Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

used roll line Kemper Quadro 5-row, overhauled, with head machine (245 cm long), double sprinkling (330 cm long) and setting table (300 cm long), width of the line: 125 cm, head machine: No. 93228, item no. 650010, 16 A, 400 V, 500 Hz

Laser welding machine with 200 watt laser power - incl. 4th axis (axis of rotation) - For cylindrical welding tasks - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg . . . . . . --------------------------------------------------------- ...

approx. 4 pieces h.a.l.m. Solar Cell Measuring System, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device – used -: Price per piece from location: 8.350.-€ (net) Complete device IV measuring system Manufacturer: H.A.L.M. Type: cetisPV Consisting of: CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete Unit Year of manufacture: unknown Condition: good Available: immediately Location: Frankenberg camp / Saxony

Fiber Laser Welding Machine with 2000 Watt Laser Power - Top device at a top price from our exhibition - approx. 20 operating hours - 2kW laser source from MaxPhotonik - German menu navigation - Universal device for welding/cutting/cleaning - Incl. 4-roll welding wire feeder - Integrated water cooling -at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg ---------------------------------------------------------------------- -------------------------------------------------- #Lasermarkieren #Lasergravur #Laserschneiden #Wasserstrahlschneiden #Laserbeschriftung #Gravur #Geschenk #Glasgravur #Werbeartikel #Holzgravur #Geschenkidee #Typenschilder #Alugravur #Ledergravur #Glasschneiden #Pulverbeschichten #Pulverlack #Entlacken #Laserentlackung #Laserreinigung #Laserstrahlreinigung #Lasern #Gewindeschneiden #Abkanten #Kanten ...

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. The unit is unused, as good as new. Max. usable cabine dimensions: 670 mm (height); 610 mm (width); 750 mm (depth).

Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard