138,481 used machines on RESALE, but how to find them? Machine Search
Vertical Press Delivery Heidelberg VSA-66/M.D Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66/M.D Year 2000 - Serial-No. 702101/00-292080 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device
Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4 -1 Frame KSB Cylinder
Schließrahmen - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm
Spindelpresse / Spindle Press Tränklein SP Spindle Press Tränklein SP
Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.
Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4 -4 Frame SBG Cylinder
Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985
Schließrahmen - Frame KS Letter Press Heidelberg KS -8 Frame KS Cylinder
Fully automatic baler Manufacturer: PAAL Type KONTI 325 G/S/k Operating hours: approx. 39,000 h Year of Make: 2012 Technical manufacturer data: Pressing force: 990 kN at 300 bar Specific pressing pressure: 120 N/cm² Drive power: 2 x 55 kW Pump capacity: 2 x 370 l/min. Total connected load: 150 kW / 260 A Volume output at idle: 800 m³/h Volume capacity at 35 kg/m³: 390 m³/h Performance at: 35 kg/m³ bulk density: approx. 13.50 t/h 60 kg/m³ bulk density: approx. 21.5 t/h 100 kg/m³ bulk density: approx. 33 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 3-fold horizontal Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Wirbulator 15 kW - Automatic 3-fold horizontal tying with 40 kg wire unwinding device - W ...
used
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg
pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
RELATIVE PRESSURE TRANSMITTER Auction-ID: A1-49997-67
SANGIACOMO T200 RCE 200T eccentric press was built in 2017 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking, stamping and deep drawing. Its wide range of machining capabilities, combined with a press force of 200 tonnes, makes it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 RCE features an intermediate wheel-pinion gear system. It provides high press force at a reduced nominal speed. As a result, the drive power can be used effectively when operating under high loads. The gears operate in an oil bath, ensuring proper lubrication of the drive components while reducing their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The press also has an overload protection system that protec ...
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
200 ton x 4000mm with Rolleri Pneumatic clamps
SANGIACOMO T200 DM-DB 200T eccentric press was built in 2018 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking and stamping. Its wide range of machining capabilities, combined with a press force of 200 tonnes, make it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 DM-DB features a drive system based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution ensures uniform torque transmission, which translates into a smooth working cycle. All drive components are continuously lubricated by a central lubrication system to minimise their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The open side wall enables the feeding of material strip. The press has ...
This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details.
Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible.
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
Control: Cybelec DNC 600S. Inspection by appointment possible.
MODEL ST-150 Power t 150 Motor power kw 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head Displacement – C mm 1,000 Bridge Displacement – D mm 2,500 Front light – A mm 1,550 Vertical light – B mm 700 Working height – E mm 750 Total front – G mm 3,000 Total side – H mm 3,000 Overall height – I mm 2,750 Weight kg 5,000 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displac ...
TECHNICAL CHARACTERISTICS: MODEL CF-100/VR Power t 100 Engine power kw 9 Neckline mm 375 Working speed mm/s 5 - 9 Approach speed mm/s 162 Return speed mm/s 230 Maximum pressure bar 290 Piston stroke mm 450 4 Lower table mm 850 × 600 Top table mm 700 × 450 Maximum vertical span mm 650 Working height mm 900 Total front mm 1,240 Total side mm 1,950 Total height mm 2,790 Weight kg 3.820 STANDARD DESCRIPTION: The CF/VR series motorized gooseneck hydraulic press models are available in three different power outputs, from 80 to 150 tons. Specially designed to carry out medium and high production work in stamping, die-cutting and drawing. These state-of-the-art presses stand out for their high versatility, allowing them to be integrated into automatic production lines. They work with a hydraulic pressure of less than 320 bar, which guarantees gr ...
HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
TECHNICAL CHARACTERISTICS: MODEL SH-250 Power tn 250 Motor power kw 5.5 Piston stroke mm 450 Maximum pressure bar 350 Neckline mm 375 Working speed mm/s 2.2 Approach speed mm/s 9.8 Return speed mm/s 17.5 Guide diameter mm 40 Support table mm 2.200 x 600 Table spacing mm 900 Support blocks mm 120 x 120 x 600 Working height mm 850 Total length mm 2.820 Total width mm 2,000 Total height mm 1.615 Weight kg 8,500 STANDARD DESCRIPTION: Our SH Series Horizontal Ram Hydraulic Press is designed with a range of three different powers ranging from 100 to 250 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars and beams. The horizontal design of the machine allows us to easily handle large beams and profiles. The horizontal hydraulic press of the latest generation HS series has evolved into a versatility of use ...
TECHNICAL CHARACTERISTICS: Model 60 NC 100 NC 150 NC Power TN 6 10 15 Motor power kw 3 3 4 Adjustable stroke mm 0 – 80 0 – 80 0 – 80 Neckline mm 550 650 450 Working Height mm 1,090 1,180 1,033 Front total mm 610 610 540 Total side mm 780 780 960 Total height mm 1,800 1,900 1,700 Weight kg 550 700 825 STANDARD DESCRIPTION: HIDROGARNE hydraulic inserters are designed for insertion and clinching work, offering robustness, precision and reliability. They are compact and low-occupy, fully hydraulic equipment that guarantees precise insertion at any point of the punch stroke. They allow clinching work to be carried out in thicknesses from 1 to 6 mm and the insertion of any type of insert in materials such as copper, aluminium, carbon steel and stainless steel. They are available in insertion powers of 6, 10 and 15 tonnes. Digital hydraulic inserters are aimed ...
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
maximum number of results exceeded
please refine your search
800 € 
