trafo union used for sale

2. Other and Auxiliary Systems SNA-17. Transformer Systems, Room K 14, Transformer 2 units Cast Resin Dry-Type Transformer Type GEAFOL TG 4951H, Built: 1990 Manufacturer: AEG Trafo Union Technical Data: - 800 kVA - Voltage level 10 kV / 0.4 kV - Dyn 5 Find more here - / Contact us at -

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Ladies and gentlemen, we have various transformers for sale services of 630KVA to 3500kva Voltage 10KV 15Kv 20KV 22kv, 30kv 33KV immediately available and nationwide available TEL. 01727265324

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Pcazz Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

ID3398 Trafö-Bleichert year/Baujahr 1983 Mobile platform with support arm adjustment and 180 degree turntable, with motors, without controls Moving platform with support arm adjustment and 180 degree turntable, with motor, without control

Three-phase oil transformer DIN 42500 The four impellers/ wheels are also exist and included the external dimensions are approx. Width 1.4 m Length 2.2 m Height to top edge of LV connection bolt 2.0 m Hermetic version with DGPT2 and Euromold plug connections Find more here - /

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: SBA Trafo, Type: SFT, aus Maschine: UV Trockner, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C=4Uf, Hz 1: 50, V2: 6000,

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap

Post welding wire and electrodes approx. 1,000kg New, unused, original packaged. Posten Welding accessories consisting of Welding dredging roller for inert gas welding machine MIG MAG Predominantly welding wire diameter 1.2mm, per roll 15kg z.B. Union A 600 IG Various electrodes e.B. Nickel A Originally packed in a cardboard box and sealed by welding in kunsstof film. Special price

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm w-axis: 900 mm taper ISO: 50 total power requirement: 18,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Union boring mill CBFK 150/2 from 1990 for sale. Is currently still in use,. Technical details / accessories / addition: x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm Spindle diameter 150 mm Spindle holder ISO 50 Spindle stroke 700 mm Spindle speeds - infinitely variable 5 - 2500 rpm Rapid traverses 10000 mm/min Table clamping area 1600 x 2000 mm Workpiece weight approx. 20 t Spindle drive motor 50 kW Feeds x/y/z - infinitely variable 1 - 9999 mm/min Table positioning 360,000 ° Total power requirement approx. 70 kW Machine weight approx. 40 t Dimensions approx. 6.0 x 8.0 x 4.5 m In 2005: new 5-axis CNC control Dr. Heidenhain TNC 430 - electron. Handwheel HR 410 for all axles with V24 interface, punched tape reader, new electrics, new hydraulics, new servo motors, 60-speed chain tool change magazine model WM III k02 B-axis (round table adjustment) 360,000  ...

Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!

spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1200 mm z-travel: 1200 mm feed movement: 710 mm spindle taper ISO: 40 turning speed range: 8 - 1600 U/min table-size: 1120 x 1000 mm table rotating: 360 ° table load: 2,5 t total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 3,3 x 3 m separate switchboard, rapid feed, some tool holders, without face plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 3250 mm swing diameter: 630 mm grinding wheel diameter: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serveral Steadies Dresser Cooland System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 2000 mm y-travel: 1250 mm z-travel: 1250 mm spindle turning speed range: 8-1600 U/min spindle stroke: 720 mm Feed: 1-2500 mm/U weight of the machine ca.: 9,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 350 mm -Width: 82 mm -Inside diameter: 220 mm -Naxos-Union: SCG 80 JOT 9 KE 226 -Price: per piece -Number: 2 pieces -Weight: 8.4 kg

table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1.250 mm table rotating: 360 Grad table positioning: 4 x 90 ° feeds - longitudinal: 0,63 - 2.000 mm/min total power requirement: 4 kW weight of the machine ca.: 7,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P -Weight: 23 kg

TIG welding machine, welding machine, TIG welding machine -WIG welding machine direct current -Max. Welding power: 400 A. -Water-cooled -Incl. Ground cable -Gas valve -Dimensions: 610/1140/H930 mm -Weight: 310 kg

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire electrode, SG2 welding wire, welding wire -small role -AWS: ER70S-6 -net weight: 5 kg -Quantity: 16x package available -Price: per package -Total weight: 5 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 26x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 1x package available -Price: per package -Weight complete: 15.6 kg/package

grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10022 Manufacturer: UNION Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001

Key data: 1200 , 800

Clamping table in absoult as good as new condition! (Distort pictures, but table is straight!) The table comes from the area of a turbine assembly and is in top condition! Metrics: Width 1.200mm Depth 800mm Height 800mm Weight 700kg Number of T-slots 7 pieces T-slot table

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

Key data: 120

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.

BFT 90/3 SPINDEL 102 , ISO

Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW

table length: 2000 mm table width: 1800 mm table load: 12,5 t Travel: 1250 mm width of T-slots: 28 mm T - slots distance: 160 mm total power requirement: 6 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 3,7x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: X-axis 2,750 mm Y-axis 2,500 mm Z-axis 2,320 mm W-axis 700 mm Spindle power 50 kW Spindle diameter 130 mm Spindle speed 1.6 – 1,600 rpm. Tool holder SK 50 Control: CNC HEIDENHAIN TNC426 Table dimensions 2,000 x 1,800 mm max. table load 8 tons B-axis 360 A° Weight approx. 37,000 kg

x-travel: 1150 mm y-travel: 350 mm z-travel: 500 mm table surface area: 1500x380 mm turning speeds: 42-1400 U/min spindle taper ISO: 50 tool clamping electrical: bore stroke: 110 mm total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10354 Manufacturer: UNION Year of construction: 1998 Retrofit: 2000 Type of control: Digitale Steuerung 2D Control: HAIDENHAIN TNC 135 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1250 mm Z-Travel: 1475 mm Spindle stroke: 710 mm Table Dimensions (Lengthxwidth): 1250x1400 mm Spindle Speed: 1600 RPM Drive Capacity - Spindle Motor: 30 kW Total Power Requirement: 35 kW

Ref. -No.: 10353 Manufacturer: UNION Year of construction: 1986 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1000 mm Z-Travel: 1200 mm W-Axis: 710 mm Spindle Taper: SK 40 Table Load: 2500 kg Max. Size Of Workpiece Lxwxh: Höhe 1400 mm Spindle Speed: 1600 RPM Rapid Traverse: 3,15 m / min Total Power Requirement: 23 kW Weight Of The Machine Ca.: 10,3 t

spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2500 mm z-travel: 1050 mm w-axis: 1000 mm Radial face slide diameter: 800 mm radial face slide travel: 240 mm table surface area: 1800x2000 mm turning speeds: 4,8-900 U/min workpiece weight: 8000 kg faceplate speeds from - to: 4,5-180 U/min Feed: 5-2000 mm/min threading: total power requirement: 40 kW weight of the machine ca.: 37 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.