track used for sale

GLIMEK Conical Rounder CR-400 GM - exhibition machine, brand-new condition, year of manufacture: 2022 - weight range 30 - 2.000 g, capacity range up to 3.600 pieces per hour, centrally adjustable track system, non-stick coating on cone and tracks, infeed at 6'00, outfeed at 12'00, track base plates made of food safe plastic, frequency converter drive for the cone speed, hot and cold air blowing unit, mechanical flour duster from stainless steel, 5 m connection cable and CEE-plug, power supply: 2.8 kW electrical connection: 400V/50-60 Hz/3~

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Ref.-No. 00624 Designation of the system of double-track timing belt conveyor with needle prederer Manufacturer Hydroautomation Model custom made needle engraving device suitable for rectangular pipes Built-in Markator Engraving Device Built 06/2017 In a conveyor belt, the following components are to be labelled with a needle preder from the company Markator. Before labeling, the part length is checked using an analog scale. Nio tested components are not labeled and must be removed manually Tubes ⃣ 35x20x1,25mm 35x25x1.25mm Length of pipes 380 ... 410mm Clock Approx. 12 seconds / tube Labeling time about 8 seconds / pipe Transport height 900x1050mm Conveyor length Ca 2500mm (approx. 45 components) Double-track timing belt conveyor with length test and marking station Length testing Labelling station Pneumatic lifter Manual adjustment Needle-pregnating c ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...

Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...

Key data: 1435

Turning diameter: 1435 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW Fields of application machining of two wheel sets at the same time turning of wheel tyre profiles on wheel sets in situ machining of brake discs on wheel sets in situ machining of single wheel sets machining of coupled wheel sets machining of wheel sets of different gauges on all mainline railway, metro and tram vehicles Rail track gauge:  1.435mm Max. wheel tread Ø:1.400mm Min. wheel tread Ø:500mm Number of slides:  2 + 2  Power:             2 x 30 kW Length:            7.000 mm  Width:             8.000 mm  Height:            2.600 mm  Weight:            32.000 kg  The tandem a ...

Capacity round maximum diameter: 410 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id     5332 MAKE          MEBA Germany TYPE            410 DG YOP               2013 SPECIFICATIONS Bandsaw / Circelblade / Automat      Semi Automat Angle L / R Degrees      L / R Degree Cutting capacity 90 ˚ Ø     410 mm Cuttting capacity 90 ˚ Flatt      700 x 410 mm Cutting capacity 45˚ Ø       410 mm Cuttting capacity 45 ˚ Flatt       500 x 410 mm blade dimensions         5800 x 41 x 1,3 mm roller conveyor / push up / measuring      3000 mm Cutti ...

CNC Portal Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P1 4000 Built: 2009 CNC Control: Vision55 2 autogenous burners 1 plasma burner with power source Kjellberg HiFocus 160i Track width: 4,000 mm Working width: 2,500 mm Track length 18 m (shortenable) without table without filter

ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR  ...

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

CNC Portal Plasma Cutting Machine Manufacturer: Lind Cutting Type: King P4000 Year of construction: 2017 CNC control Track width: 4,000 mm Running track length: approx. 15 m Working area: 2800 x 12000 mm without suction table 1 x Plasma chamfer unit Pro Cut 2D-N Power source Kjellberg HiFocus 440i Filter system Kompac Air 325 660 4x4/o 18.50 KW

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

Used curd production line from OBRAM Olsztyn. Year of manufacture 2005. Line capacity 1400 kg/h. Packing machine: Multivac R 240 with BIZERBA CWM 6000 checkweigher. 2-track CIP washing station. Line composition: - UFO - Column forming device UF21 - Curd multiforms - 42 nests - Curd presses - 3 pieces - Pressing covers for curd presses - 3 pieces - Multiform swivels - 2 pieces - Multiform emptier - Multiform washer - Multiform magazine for 30 pieces - Multiform transport system - Tray filler - Trays for transporting cottage cheese - Trolleys for transporting trays - Multivac R 240 packaging machine - hard bottom film, soft top film, packaging with the possibility of multiple opening - Automatic constant weight control device BIZERBA CWM 6000 - 2-track CIP station WAB-30/2, OBRAM, 3 tanks with a capacity of 3,000 L

HILLERSLEV / SCANVAEGT ID.NO. 2152 Hillerslev / Scanvaegt line distributor year of year 2004 3-track track with intralox band. Dimensions L 72 x W 130 cm H 75 + - 20 cm.

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...

The scope of delivery includes: 01x Scissor roller conveyor, used Internal designation: R-2 Studs per lane: 04 pcs. Material color frame: sendzimir galvanized Material color rolls: light blue Total length variable from 1,800 - 6,600 mm overall width: approx. 500 mm Web width: approx. 400 mm total height: approx. 720 - 1,025 mm (variable) Further technical data on the scissor roller conveyor: Manufacturer: Rollen Blume Pitch at 6,600 mm track length: approx. 125 mm Pitch at 1,800 mm web length: approx. 30 mm Frame profile: Ø: 28 mm Roll spacing: approx. 105 mm Roll Ø: approx. 45 mm Roller track: movable! Brake rollerØ: approx. 100 mm / rubber Brake roller width: approx. 30 mm Note: - High flexibility in routing (S-curves possible) - Scissor roller conveyors can be pushed into each other to save space. - The roller conveyors are super easy to mov ...

Mini excavator model KV 10 with cab+articulated arm and adjustable landing gear 78cm to 92 cm NEW - Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1100 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: Single-cylinder, air-cooled Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track heig ...

Mini Excavator Model R319 Articulated Arm and Adjustable Landing Gear 78cm - 92cm NEW - Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1000 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: Single-cylinder, air-cooled Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track height: 320mm m ...

Mini Excavator Model HT15 - NEW Finally assembled in Germany Product image is a symbolic image This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Weight: 1500 kg Grab bucket capacity: 0.025cbm/120kg Bucket width: 380mm Engine: KOOP 2-cylinder diesel Rated Power: 15kw Speed: 3.5km/h Dimensions Overall dimension: 2550x940x1380mm Wheelbase: 770mm Overall length: 1090mm Ground clearance of platform: 380mm Turning radius of platform to the rear: 733mm Chassis width: 940mm Track width: 180mm Chassis ground clearance: 380mm Track height: 320mm Workspace max. digging depth: 1650mm max. vertical digging depth:1375mm max. digging height: 2610mm max. dumping height: 1850mm max. digging radi ...

Mini Excavator Model HT15 with Articulated Arm - NEW Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Weight: 1500 kg Grab bucket capacity: 0.025cbm/120kg Bucket width: 380mm Engine: KOOP 2-cylinder diesel Rated Power: 15kw Speed: 3.5km/h Dimensions Overall dimension: 2550x940x1380mm Wheelbase: 770mm Overall length: 1090mm Ground clearance of platform: 380mm Turning radius of platform to the rear: 733mm Chassis width: 940mm Track width: 180mm Chassis ground clearance: 380mm Track height: 320mm Workspace max. digging depth: 1650mm max. vertical digging depth:1375mm max. digging height: 2610mm max. dumping height: 1850mm max. digging radius on the ground ...

Mini Excavator Model HT10 with Articulated Arm - Final Assembly in Germany - New This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1100 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: single cylinder, fan cool Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track height: 320mm max. digging depth: 1650mm max. digging h ...

cutting diameter: 460 mm saw band length: 5334 mm cutting width: 1,3 mm cutting range - square -: 320 x 320 mm cutting range - flat -: 500 x 320 mm control: minipos 807 cutting speed: 16 - 80 m/min dimensions of saw-band: 5334 x 41 x 1,3 mm feed length: 580 mm feed length: multiple: 5800 mm total power requirement: 8 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data (subject to change): Machine: Constant workpiece output from the chain path: 38 mm (incl. edge at edge thicknesses 0.3 - 3 mm) min. throughput width: 65 mm with a maximum workpiece thickness of 25 mm min. workpiece length in feed direction: 150 mm Basic height (upper edge chain track): 960 mm Workpiece: min. workpiece length: 150 mm min. workpiece width: 65 mm min. workpiece thickness: 8 mm workpiece thickness: 40 mm (with copy function) workpiece thickness: 60 mm (without copy function) Smallest workpiece: 150 mm x 150 mm, or 65 mm x 300 mm Lateral protruding coating material: 0 mm Edge material: paper, plastic and veneer min. height: 14 mm height: 65 mm Roll material: min. thickness 0.3 mm thickness 3.0 mm Veneer edges limited possible up to 1.0 mm cross-section 130 mm² min edge length 160 mm upper edge protrusion: 5 mm Equipment: - Drive fo ...

ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega

TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining Bagger / Tieflöffelbagger Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Flow rate: up to 1,000 t/h Operating hours: approx. 10,000 h Engine: Liebherr V12 diesel engine, 565 kW / 1757 hp at (1,800 rpm) Displacement: 24.24 l Emission stage: EU Stage 2 / Tier 2 Hydraulics: 4 x Liebherr hydraulic pumps (total flow rate 2171 l/min) SPECIFIC COMMENT - 1133 undercarriage track 4.230 mm, wheel 5.2OO mm - Chains LH 1562; 2-web bottom plates 6OO mm - Monoblock boom 7.80 m with lifting cylinder - Bucket handle sealed 3.40 m with tilting cylinder TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining excavator / Backhoe excavator Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Operating hours: approx. 10,000 h Output: up to 1,0 ...

Shuttle conveyor (Traverser) Used to transfer PCB's from one PCB production line into two PCB production lines from single track to dual track operated machines or vice versa.

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Masch. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm Raceway length 8000 mm Track width 3345 mm Height of running track 650 mm 2x machine cutting torch with firing table; used

Suspended crane runway crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead conveyor with monorail Crane bridge Light crane system made of KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance longitudinal rails: 4.1 meters Longitudinal member length complete: 12 meters Girder profile cross beam = KBK1 Carrier profile longitudinal track = KBK1 Consisting of: 29 meters system profile KBK-1 (4x 6000 mm + 1x 5000 mm) 1 piece carriage for the Crane suspension 2 pieces Double carriage for the longitudinal rails 10 pieces screw claws for crane suspension or ceiling mounting (without carrier clamps) 6 pieces End cover suitable for the track KBK1; used

The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels with 99,9% accuracy. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle. Easy to operate touchscreen, stainless steel version (SS304). - Specifications: error rate: < 0.1% | number of vibrating tracks: 16 | capacity: max. 5200 pcs/min | counting range: 15-9999 pcs | product sizes: min. ? 3mm, max. ? 22mm | container: ?(25-75)xH(0-240)mm | infeed hopper volume: 38l | compressed air: 0.15m?/6ba ...

The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle (number of nozzles customizable for surcharge). Easy to operate touchscreen. - Specifications: product sizes: min. ? 3mm, max. ? 15mm | number of vibrating tracks: 16 | vibrating levels: 2 | capacity for tablet example ? 8mm: max. 3000 pcs/min | counting range: 1-9999 pcs | suitable bottles: 10-500ml, round or square | power: 220V,1.2kW | ma ...

Max. roll diameter: 500mm, track width: 320mm, speed: 250 prints/min, max. printing width: 300mm, max. printing length: 300mm, including winder and unwinder, without track inspection and edge controls.

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

Offer 04446 Specifications: - Total width approx. 950 mm - Working surface length / web length approx. 420 mm - Working surface depth / web depth approx. 150 mm - Compression foot approx. W 120 x D 125 x H 140 mm - Total depth approx. 280 mm - Round horn approx. 250 mm - Square horn approx. 260 mm - Round hole in the track approx. 22 mm - Through-square hole in the track approx. 25 mm - Anvil height approx. 345 mm - Weight approx. 190 kg - Base frame W 520 x D 520 x H 345 mm - Weight 30 kg

Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Load capacity: 12,500 kg Crane track average: 13,600 mm Cat track average: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min stroke: 5 / 0.8 m/min hook travel: approx. 5.8 m with test book and documentation ! Dismantled ! used, tested ! Dimensions: mm

Roller conveyor with ball roller table, transport track PAGUS 1250 x 500 mm web length ( total ): 1250 mm web width: 500 mm web height: 70 mm roller conveyor: Roll diameter: Ø 50 mm Roll width: 490 mm Wheelbase: 75 mm Number of rollers: 10 Track length: 750 mm Ball Roller Table: Number of balls: 46 Pitch: 75 mm Ball diameter: Ø 25.4 mm web length: 500 mm used, tested ! Dimensions: 1250 x 550 x 70 mm

Roller conveyor, transport track PAGUS 2475 x 500 mm Roll diameter: Ø 50 mm Roll width: 490 mm < br /> Wheelbase: 75 mm Number of rollers: 33 track length: 2475 mm web width: 500 mm web height: 70 mm used, checked! Dimensions: 2475 x 550 x 70 mm

Key data: 1000 KG

Producer: Stanley Vidmar Type: HAZMAT Dimensions: 7500 x 3581 x 4741 mm Construction: 2008 Load capacity of racks: 1000 kg Column load capacity: 4000 kg Number of shelves: 60 pcs Number of legs: 16 pcs The equipment is a hand-operated stacking crane with a forklift, the purpose of which is to serve the storage rack of the STAK system. The nominal lifting capacity of the crane is 1000 kg. On the stand, the loads are stored on removable sheet steel pallets (pallets) with a permissible load capacity of 1,000 kg each. The load is placed with the crane together with the pallet or lifted. The design of the rack structure allows the pallets to be arranged according to requirements with a height division of 98 mm. The crane moves in the area between the rows of racks mounted on both sides and even has an outlet section at one end of the rail for loading with a forklift. A pair of rig ...

TECHNICAL SPECIFICATIONS Manufacturer: PS Förder- und Lagertechnik (KW Kranwerke) Designation: Bucket chain excavator Type: PSZ-80L Year of construction: 1992 Design: Land-based on crawler chassis Flow rate: approx. 100 cbm/h Conveyed material size: approx. 0 - 16 mm Conveying speed: 44 m/min Conveying depth: max. 15 m Bucket capacity: 75 ltr. Number of buckets: 47 pcs. Length of lower bucket ladder: 22.0 m Upper bucket ladder length: 6.85 m Boom length: 14.0 m Boom lifting speed: 1.5 m/min Discharge belt length: 15.0 m Discharge belt width: 650 mm Discharge height conveyed material: 5.5 m Travel speed: 2 m/min Track width: 900 mm External dimensions of track: 4,100 mm Generator: LEROY-SOMER Diesel Three-phase Generator Set Generator type: LSA 4450 VL11 (100 kW / 125 kVA) Current type, frequency, speed: 400/230 V, 50 Hz., 1,500 rpm Engine: IVECO diesel engine  ...

Single-Girder Bridge Crane, Bridge Crane, Overhead Crane with Track, Bridge Crane with Electric Chain Hoist, Portal Crane; Used Machine Manufacturer: S+V 98 Ltd Type: DP-013-3200-400-800 Year: 2013/05 Last Inspection: 2023.03 Capacity: 3.2 tons Bridge Crane with Electric Chain Hoist: Width: 4000 mm Span: 3800 mm Weight: 1950 Kg Capacity: 3200 Kg Lifting Height: 2900 mm Trolley: Yale With Wired Remote Control Electric Travel and Lifting Crane Track: Length: 8220 mm Width: 4000 mm Height: 3800 mm Profile: HEA 220 Lifting Height: 2900 mm Span: 3800 mm

• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m on a solid base frame, height adjustable -Roll width: 490 mm -Roller diameter: 90 mm -Roller spacing: 100 mm -Quantity: 2x roller conveyor available -Price per piece -Dimensions: 2490/570/H760 mm -Weight: 216 kg/pc.

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.3 m -Roll width: 705 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Dimensions: 3300/760/H295 mm -Weight: 180 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, length 4.0 m each, 2 pieces -Roll width: 800 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Price/tax: complete -Dimensions: 4000/840/H260 mm / 4000/840/H240 mm -Total weight: 336 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Handover: in current condition as seen -Conveyor rollers: 1 piece is missing, see photos -Roller conveyor: not powered -Roll width: 740 mm -Diameter roll: 90 mm -Center distance: 610 mm -Total dimensions: 6020/960/H845 mm -Weight: 400 kg

Rail wheel, flanged wheel, track roller, track wheel, wagon wheel -Roller: with angular groove, without bearing -wheel: Ø tot. 218mm -Groove width: 55 mm -Hub: Ø 45 x 52 mm -Number: 3x wheel available -Price per piece -Total dimensions: Ø218 x 87 mm -Weight: 9.9 kg/pc.

Curved conveyor belt, curved track, curved conveyor track, curved roller conveyor, curved roller conveyor, curved conveyor, curved conveyor with drive, conveyor belt -Manufacturer: TGW, 90° curved conveyor belt with drive -Speed: 10m/min -Drive: SEW-Eurodrive 0.55 kW 16 rpm SA57 DT80K4/TF/Z/IS -Conveyor width: 1275 mm -Transport dimension: 1600/2760/H545 mm -Weight: 342 kg