track used for sale

Model: HEMINGSTONE HM-1100 C5 Bag size - Width 1000 mm min(each track), Length 250-700 mm Number of tracks – 5 Production Speed (cycles/min) max 200 Production capacity max – 1000 pcs/min Film unwind width max – 900 mm Film unwind diameter max – 1000 mm Thickness of material 14-60 microns (2x7 – 2x30) Drive system – Servo drive Year 2007

Key data: 30000 KG, 4500 mm, 2850 mm

Hydraulic glass storage system, movable, length 13 meters, operable with radio remote control. Track on floor rails. Each shelf compartment can be opened and closed individually.

The machine is in good technical condition. Possibility of cutting at an angle of 0 - 60° Cutting a circular cross-section max. 305 mm Cutting a rectangular cross-section max. 360x305 mm The saw is sold including a 3x2m roller track (possibility of screwing together up to a length of 6m). By prior arrangement, the possibility of a tour in progress.

Multi-sided semi-automatic band saw with double-sided angle cuts in the range -60° to +60°. The smallest cut diameter 5 mm The length of the shortest rest 30 mm The height of the material 760 mm The dimensions of the saw band (L × H × W) 3800 × (25) 27 × 0.9 mm The power of the saw band drive 1.5 kW The speed of the saw band 20 ÷ 90 m·min-1 Single feed length 3 kVA Machine dimensions (W × D × H) 1388 × 1950 × 1209mm Weight 493 kg. Machine in good technical condition. Roller track sections 5m+3m located outside, showing signs of corrosion.

Inv. Num. : 7291 Type: Romat 410 Producer: Cloos Created: 2007 Parameters: Control system: Rotrol II Welding machine: MC3R 553 Workstation with one track: 10 m

- Working range / cutting width approx. 2500 mm - Working range / cutting length at approx. 8 m - Control BACH type MyBach - Track gauge approx. 2850 mm - Plasma torch with height adjustment - Plasma source KJELLBERG Hi FOCUS 280 i Plus - Cutting current at 100% ED 10 - 280 A - Cutting range steel approx. 5 - 60 mm - Cutting range aluminium approx. 5 - 30 mm - Cutting range stainless steel approx. 5 - 30 mm -Auto. Gas console - Connection 400 V - Extraction table with extraction system TEKA 12 x 2 m - Extraction system TEKA FC 4 H with spark separator - Weight approx. 8 T

Inv. Num. : 6855 Type: MA 1900 Producer: Motoman Created: 2012 Parameters: Operating hours: 2200 h The workstation consists of the following parts: Motoman MA 1900 Robot (DX 100 Controller) Source: Lorch Saprom Speed Pulse S8 Tbi Welding Torch GUDEL track - type TMF-1/4000 - with a carriage for a barrel with welding wire 2x fixed table with dimensions 2000x1500 mm and a load capacity of 650 kg Horizontal positioner WESTAX WXH-150 (load capacity 1500 kg) 3x internal automatic workstation doors 3x external telescopic doors 3x SICK safety scanners Automatic cooker hood 2x manually hinged hood Superior control system WESTAX RCU 50 TBI JetStream Automatic Welding Torch Cleaner Positioning frame in HOBES for the storage of fixtures Fencing of the robot workstation

- Fully automatic water bottling line, from blowing to shrink/unit pack formation, and palletizing. (Bottle preform in - at the end the finished pallet is foiled out - this is how it works simplified) Currently: 2 liter PET, carbonated and still mineral water. (Possible upgrade to 0.5, 1.5 liter etc.) In the case of a 2-liter product: nominal capacity 8,500 bottles/hour (Productivity is proportionally higher in the case of a smaller volume) The power of the machine line can be further increased (the machine with the lowest power determines the maximum power of the line) - nominal capacity 8,500 b/h / 2L (b/h = bottle/hour) - compressor: Kaeser G1400 40 Bar - blower: Siedel SB016 No109: 17,500 b/h - air conveyor: Laffranchi - conveyor and buffer track - filling machine: Sarcmi RG8 202 1510/84 Selenia 70/8 02.076: 12,000 b/h - labeller: Sacmi Opera Ser.no: 10116262: 22,000  ...

- German production - year of production 1990 - Operation and maintenance manual - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 130 mm - cutting height with shoe 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum element length 700 mm - table width 740 mm - feed adjustable on the inverter 6-48 m/min - three rows of pawls - possibility of installing a shoe - sleeve diameter 80 mm - fixed sleeve length 190 mm - electric cutting height adjustment - electric shaft height adjustment - four upper pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Machine dimensions 250x200x220 cm weight 2000 kg

Key data: 780 mm, 560 mm, 560 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMC 60 T With track control Heidenhain iTNC 530 Year of construction: 2008 Travels: X 780 Y 560 Z 560 Speed range: 0 – 18,000 rpm infinitely variable With the following accessories: NC rotary table with 2-fold pallet changer 630 mm x 500 mm Vertical tool changer with 60 magazine slots Controlled milling head ( B axis ) IKZ 40 bar Conveyor Integrated screw conveyor Rotoclear Electronic handwheel Mode 3 + 4 Chip Sweeping Gun Full protection cabin with interior lighting 3-Piece Height-Adjustable Machine Shoes Operating instructions

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

Inv. Num. : 6643 Type: RUR 2000 GP Producer: Pierce Created: 2008 Parameters: Control system: BURNY 10 LCD Plus Track spacing: 2000 mm

Code: 0245 Brand: SCM Model: D 80/K Automatic double end tenoner for wood, furniture, custom-made furniture, panels, doors, frames, composite materials and various Technical data: Working width mm 2500 Min working width on 1 track mm 75 Min working width on 2 tracks mm 250 Working height mm 180 Electronic variable feed speed from 3 to 18 mt/min Rubber-coated tracks Working width programmable with NC Composition: Automatic belt scoring unit applied to the direct drive unit - Rpm 5500 Hogging unit: Motor Hp 7,5 - Rpm 3000 - Suction mouth diameter mm 150 Automatic spindle moulder unit: Motor Hp 5,5/9 - Rpm 3000/6000 - Suction mouth diameter mm 120 Control panel Compressed air Bar 6 Overall dimensions mm 4100 x 2000 x 1550 h

Used sachet machine by MIFLEX-MASZ model AS-20. New 2014. Equipped with : - unwinding of packaging material, - guide roller system, - volumetric dosing device with adjustable portions, - sealing system, - shaped sachet punching system, - control cabinet, - main drive with adjustable sachet driver 40-150 cycles per minute - grouping conveyor, - 5-track, - capacity max 750 pcs. (sachets)/min.

First machine, for longitudinal processing, TECNOLEGNO COMPACT 48/2, built in 1998 Working width min/max 90/300 mm. Single chain track Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe Second machine for crosswise processing, MANEA MST-70, built in 1991 Working width min/max 220 / 2500 mm. Infeed chain with dogs hopper feed Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor un ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency Comprising a range of top tier components the Complete Bottling Line KRONES ensures seamless performance effectively meeting the stringent demands of high volume production Main Components Firstly the KRONES K 131 669 filling monoblock manufactured in 2016 stands as the centerpiece of the Complete Bottling Line KRONES Capable of handling a remarkable 20000 bottles per hour it is complemented by the 1998 KRONES 472 072 depalletizer and the 2000 Gronemeyer RINSER 8983 400 4 Consequently this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES Quality Control ...

Code: 0772 Brand: DE STEFANI Model: MVT 1000 Edge sander with 1 group for flat and shaped edges, solid wood edges, Mdf, veneered, melamine paper covered, varnished, for furniture, doors, panels, etc. Technical data: Tilting sanding group suitable to sand rough or finished mouldings with pad for flat and shaped surfaces 2 speed motor rpm 660/1450 Max working height mm 100 - Adjustment by handwheel Feed track speed variator from 6 to 20 mt/min Extractable roller conveyor for panel support Abrasive belt cleaning blower N° 1 suction mouth diameter mm 120 N° 1 suction mouth diameter mm 100 Compressed air 6-7 atm Overall dimensions mm 2100 x 1300 x 1400 h Weight kg 1100

Home organ WERSI Spectra DX700CD, mother-of-pearl white high-gloss lacquer white, 2 memory cards, purchased for 40,000 DM, restored for approx. 7,000 DM, multi-track cassette recorder TASCAM 244, mixing console BELL MDA400, drum machine BÖHM Digital-Drums

Key data: 1250 mm, 1000 mm, 1000 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 125 P duoBlock NEW DMG Design With track control Heidenhain iTNC 530 Year of construction: 2008 Travels: X 1250 Y 1000 Z 1000 Speed range: 0 - 18000 rpm ( HSK 63 ) With the following accessories: NC rotary table 1250 mm x 1000 mm clamping surface Universal milling head with controlled B axis Automatic swivel milling head 60 speed tool changer ( HSK 63 ) Full protection cabin with interior lighting Mode 3 + 4 3 D Probe Heidenhain TS 642 Electronic handwheel Spindle Oil Cooler IKZ 40 Bar Rotoclear Conveyor Oil mist extraction Coolant spray gun Control cabinet cooling unit (RITTAL) 3 Height-Adjustable Machine Shoes Operating instructions

CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of construction: 2006 Travel : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC Swivel Rotary Table Ø 630 mm Vertical tool changer with 32 magazine positions ( SK 40 ) Additional magazine 87 tool positions ( ZM 87) Linear axes standard version Internal coolant supply (IKZ 40 bar) Scraper belt conveyor Coolant system Blow-off device Manual Cab Door , Manual Cab Canopy 3 D Probe Heidenhain BLUM Wz-Bruch/ Surveying Electr. Heat compensation iTNC Modification SRT 630 paral. T –Grooves 14 H7 4 Pieces of Height Adjustable Machine Shoes Operating instructions

Key data: 500 mm, 400 mm, 400 mm

Very good condition, regularly maintained Control: Heidenhain track control Axles: 3 Vertical and Horizontal Spindle X-axis travel : 500 mm Y-axis travel : 400 mm Z-axis travel: 400 mm Direct displacement measuring system Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle:80 mm Spindle speed: 40-2,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 6.63 kW Weight approx.: 1900 kg Dimensions LxW approx.: 2360x2170 mm

Code: 0258 Brand: SPANEVELLO Model: STDA Automatic double end tenoner with 8 motors for furniture, doors, wooden frames, panels and various Technical data: Robust construction Working width max mm 3200 Working width min mm 180 Min working width on one track mm 75 Max working height mm 120 Variable feed speed mt/min 2,5/23 Motor power each Hp 5 Electrical control panel Suction mouth diameter mm 120 Weight kg 3400

Machine Type: NC Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 3 A Year of construction: 1981 Condition: very good Offer Type: Used Machine Specifications: Control: CNC 2101 Positioning Track Control Table: 800 x 460 mm Travel range: x = 500 mm y = 300 mm z = 400 mm Speed range: 25 - 2500 rpm. Spindle holder: SK40 with automatic tool clamping Propulsion: 2.0 / 4.0 kW Remark: NC and conventional operation possible, with handwheels in all axles, Drilling quills in vertical and horizontal, Central lubrication Machine light Weight: 1700 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Description: Track length: approx. 25 metres for sheet length 6000 mm System can be tilted 180 degrees 14 suction cups Crane control: wired control, With rail: Yes, Self-running: Yes, Pulling height max.: 4 m, Vehicle identification number: GB-110622-B, maximum capacity: 80 kg, gauge width: 7,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: Track length: approx. 25 metres for sheet length 6000 mm System can be tilted 180 degrees 14 suction cups Crane control: wired control, With rail: Yes, Self-running: Yes, Pulling height max.: 4 m, Vehicle identification number: GB-110623-P, maximum capacity: 80 kg, gauge width: 12,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: Track length: approx. 25 metres for sheet length 6000 mm 7 suction cups Crane control: wired control, With rail: Yes, Self-running: Yes, Pulling height max.: 4 m, Vehicle identification number: BG-110620-U, maximum capacity: 80 kg, gauge width: 12,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Slightly articulated combination roller:, Bomag BW 100 ACM-5, Year of construction: 2016, Output for 2-4 cm asphalt layer: 15-35 t/h, Output with 6-8 cm asphalt layer: 35-50 t/h, Output with 10-14 cm asphalt layer: 45-90 t/h, Dead weight: 2350 kg, Axle load: 1175 kg, Wheel load: 294 kg, Working width: 100 cm, Inner track radius: 255 cm, Engine: Kubota, Type: D 1703, Power: 18.5 kW

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor -Manufacturer: TGW, Curved roller conveyor without drive -Rolls: Ø 50/77 mm, width up to 410 mm -Transport dimensions: 1490/480/H190 mm -Weight: 33 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor -Manufacturer: TGW, Curved roller conveyor ZKRF in-out-KRF with drive -Rolls: Ø 50/77 mm, width up to 410 mm -Speed: 30 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Transport dimensions: 2120/480/H300 mm -Weight: 93 kg with pallet

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production environments, this model has been a staple for businesses seeking to enhance their manufacturing capabilities. This DEMAG machine we have for sale represents an opportunity to acquire proven machinery with a track record of success. For further details, please contact us to discuss how this machine can meet your needs.

Description: Brand: Brandt Type: KDF 210 Year of construction: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ Speed-controlled track control with optical start-stop indication sensors Control screen: LCD, 4 lines of text, ergonomically integrated on the input side on the hood Configuration: Chain conveyor transport Central lubrication Upper pressure/ guidance: via central adjustment with 2 rows of rollers positioned offset to each other Joint cutters: (2x) 0.75 kW, 200 Hz Diamond-tipped tool, manual positioning (Siko counters), max. 3 mm overhang and max. 40 mm workpiece thickness Glue unit: A3 glue unit for hot-melt and possibility for PU glue application Glue output roller under workpiece in following or counterflow mode Heavy-duty cutter Pressure zone: Pneumatically driven 1st pressure roller, 2nd roller running freely ensures good compaction Hacksaws: (2x) ...

Single-track central washing station Manufacturer: OBRAM Three tanks with a capacity of 3,000 liters each

Description: Carrying capacity: 5000 kg Incl. runway Track dimensions: approx. 17000 mm Dimensions of the bridge: approx. 12000 mm Attention: the bridge crane can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 17,000 x 12,000 x 5,000 mm, weight approx.: 5,000 kg

Net pressure: 400 kN Surface pressure: 3.2 N/mm² Clamping plate dimensions: 500 x 250 mm ram plate, 500 x 550 mm table size Temperature control: No heating plates installed Number of floors: 1 floor Plate spacing: 755 mm without heating plates Number of cylinders: 1 Press piston Ø: 130 mm Press piston stroke: 400 mm Guide columns: 2 x Ø 90 mm Velocities: Rapid traverse up to 79 kN: 113 mm/s Press pass at 150 kN: 19 mm/s Press pass at 400 kN: 63 mm/s Return stroke: 300 mm/s Return stroke, delayed: 50 mm/s Table height: 700 mm at ground level from the floor Ejector: No ejectors (central bore closed by inserts in the table top Ø 90 mm) Hydraulics: Oil hydraulics with Rexroth valves, 400 l tank, 30 - 300 bar INLINE Hydraulic Axial Piston Pump, ABB Pump Motor 11 kW Safety: light barrier at the front; Safety grilles on the sides and rear Power supply: ...

Description: Serial number: 10006-1019, Year of construction: 2020, 1.5 m track, 3 rows, 1.8 m row spacing, with hydraulic set Equipment: ATTENTION camera control is not available Condition note: Various paint damage and rust spots on the machine. Rods mostly rusty, partly broken off, various repair measures necessary Location: A-3242 Texing Approx. Onsite Dimension. (l x w x h): 3,000 x 1,700 x 3,350 mm, weight approx.: 850 kg

Description: serial number AH00004035 variable track feed speed 12-18m/min panel thickness 8-60 mm thickness of edges in strips 0,4-8 mm thickness of rolled edges 0,4-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) (with unit adjustment modification) 60 mm opening for panel support roller 560 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document ,PDF - OLIMPIC K 560 R PS 7.pdf serial number: AH00004035, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,300 x 1,900 mm, weight approx.: 1,900 kg

Description: serial number AH00004898 track feed speed 11 m/min panel thickness 8-60 mm thickness of edges in strips 0,3-6mm thickness of rolled edges 0,3-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm exceeding material to the panel thickness 2+2 distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) 90 mm opening for panel support roller 500 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document PDF - OLIMPIC K 360 HP.pdf  , serial number: AH00004898, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,300 x 1,800 mm, weight approx.: 1,400 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Double gantry longitudinal seam welding machine Oerlikon/Cloos Year of manufacture: 2011, Retrofit 2019 Working range: welding length 32,000 mm, Ground chassis incl. ball bearing Travel: 32,000 mm Travel speed: 0.3-5.0 m/min Chassis dimensions: approx. 2,600 x 4,900 mm Track gauge: approx. 2,000 mm Platform incl. lifting column Stage dimensions : approx. 3,000 x 4,800 mm Total height: approx. 7,000 mm Rail height: approx. 420 mm Swivel range: +/- 90° Travel height: 3,200 mm Boom arm: 5,200 mm, Double gantry with two chassis and burner carriage 2x Cloos 600A welding machines The machine is capable of welding both transversely and longitudinally, as well as round seams in conjunction with a roller-turn device or a tilt-and-turn table. The travel distance of the system can be extended by adapting the rail system and energy chain on site.

Description: Rotation diameter over bed 500 mm, over face slide285 mm, in the bed recess 540 mm, length of bed recess 165 mm, permissible workpiece weight with 2 set pieces 800 kg, speed range 11.2 to 2240 rpm, feed length 0.063 to 56 mm, flat 0.0315 to 28 mm, working stroke face slide 345 mm, top slide 125 mm, tailstock quill 190 mm, centre height over flat track 240 mm, bed width 360 mm, digital readout HEIDENHAIN, turning length 1000 mm weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,600 x 1,700 mm

Description: Rotation diameter over bed 640 mm, over the long facing slide 385 mm, in the bed recess 700 mm, permissible workpiece weight with 2 setting pieces 2500 kg, speed range 9 to 1800 rpm, working stroke facing slide 44 mm, top slide 165 mm, tailstock quill 280 mm, centre height over flat track 315 mm, bed width 450 mm, turning length 2000 mm weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,200 x 2,000 mm

Description: - Trolley, 5 pieces - With wheels for rails - Roller width 1000 mm, roller diameter 60 mm, height from floor approx. 250 mm - 5 x roller track length 2000 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 1,300 x 1,200 mm, weight approx.: 350 kg

Description: track width 4800 mm length of rails approx. 29200 mm Panel format max. 4100 x 2100 mm, min. 2000 x 800 mm Panel thickness 0.8 to 40 mm max. stacking height in the warehouse 2100 mm Positioning accuracy +/- 35 mm Speed of trolley on the bridge max. 80 m/min Stroke direction Z max. 30 m/min Automatic weight detection for optimum separation function suitable for Lot 670 with CE certificate Approx. Onsite Dimension. (l x w x h): 11,000 x 35,000 x 3,500 mm, weight approx.: 15,000 kg

Description: Track gauge 8000 mm Bridge wheel diameter 320 mm Rail width 60 mm Radio control - Hand control  , RAIL LIFT Drum diameter 324 mm Rope diameter 16 mm For further information attached PDF file serial number: 5,194, Hoist: electric chain hoist, Crane control: wired control, With rail: Yes, maximum capacity: 25,000 kg, Approx. Onsite Dimension. (l x w x h): 9,500 x 28,000 x 10,500 mm, weight approx.: 40,000 kg

Description German-made metal band saw equipped with versatile sawing functions. Maximum cutting diameter 600mm. Equipped with a digital length measuring sensor and an angle degree display. The saw can be operated with a program or manually. If necessary, you can bring an outdoor roller track of about 10m and several spare blades belonging to the machine. Instructions for use in Finnish and original Kaltenbah instructions. The machine has electricity and can be used for a test run.

Double end tenoner for massiv wood panels Brand: Wehrmann Type: Combima Year: 2007 Wehrmann designed: sturdy, high quality and NC controlled - The IMA Combima machine chassis makes our machine very sturdy - This machine is modular equipped with the below listed units - Heesemann as a High-Quality brand supplied us with their sanding technology - NC controlled with grinding units 1 motorized width adjustment max. working width: approx. 2,500 mm min. working width: approx. 280 mm low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates, driver cams, distance 1,080 mm, pneumatic cam control at 3 heights (6, 12, 18 mm) 2 top prints, electromechanically height-adjustable, each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle working height approx. 950 mm electronic frequency contro ...

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at machi ...