tra used for sale

Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40333-112

Antique David Brown tractor in original used condition. The engine starts and runs properly. Sold without battery Features and information: Brand: David Brown Diesel engine Manual gearbox Rear linkage Rear PTO Engine serial number: AK4/3/8 – 17538 Additional visible reference: P23 – 12599 Builder Plaque David Brown Presents Status: Tractor starts and runs Slight crack present on the engine block; despite this, the engine runs correctly Linkage to be checked Non-original cover Signs of use, corrosion and age-related wear visible in photos Sold without papers Interesting antique tractor for collection, restoration or use after general checking. Sold in the condition visible in the photos. Auction-ID: A3-46111-36615

David Brown 25D – Antique Tractor – 1956 Very nice old David Brown 25D tractor, in an original configuration and in good working order. The tractor starts and runs properly. The main mechanical components have been tested and are functional: Functional brakes Functional gearbox Functional clutch Functional rear linkage Functional PTO Features: Brand: David Brown Model: 25D Type: PD25 (D25) First put into circulation: 28/05/1956 Diesel engine Displacement: 2,523 cm³ Chassis number: 17386 Unladen weight: 1,498 kg 2 axles Fully original configuration Equipment: Rear linkage PTO Original side cutter bar Functional cutter bar, currently dismantled and to be reassembled Cutter bar elements supplied with the tractor The tractor has a beautiful patina corresponding to its age and retains its original old appearance. Sold without battery Documents present. ...

Has 18hp. 4 wheel drive. 1005 hours. 12 forward gears + 4 reverse gears. With crawler gear. Partial power shift. PTO shaft with different speeds. 3 point levy. With matching Yanmar tiller, RSB1300: Working width 130cm. Including PTO. Auction-ID: A3-46111-8237

Need a new chain, battery bad, Auction-ID: A1-40333-42

Replica of the historic Lanz Bulldog HL12 tractor, built by the Peda workshop in Gostyń, according to the information provided. Year of construction announced: 2016. This machine faithfully reproduces the appearance of a Lanz Bulldog HL12 with a single-cylinder hot ball engine. It is equipped with a horizontal engine with vertical chimney, a large flywheel, a mechanical transmission with exposed chain, an open chassis, a perforated metal seat and wooden footrests. The tractor rests on four spoked metal wheels, painted dark red and equipped with rubber tyres. The mechanical controls, copper pipes, grease nipples, brass fittings and various transmission elements are visible and give the whole thing a particularly detailed look. The machine is in very good general aesthetic condition with a glossy black paint and a neat finish. Traces of storage, dust, small paint marks, patina on so ...

This compact sweeper is ideal for your work floor or outdoor area. The 2 brushes on both sides with a working width of 1000mm allow you to sweep a lot at the same time, also in combination with the rollers at the bottom of the machine and the large collection tray provides a lot of convenience in cleaning your floors. Unused in box. Auction-ID: A1-40333-68

engine runs, new drive belt must be installed Auction-ID: A1-40333-113

Works, but needs some work Auction-ID: A1-40333-39

Operation unknown Auction-ID: A1-40333-79

Antique Fordson Super Major tractor in good working order. Sold without battery Features: Brand: Fordson Model: Super Major Year / first put into service: 1961 Chassis number: 1617830 Diesel engine Manual gearbox Rear linkage Rear PTO 3-point hitch Smiths hour counter / rev counter Rear tyres in good overall condition Documents available Status and operation: Starts and runs Functional motor Functional gearbox Functional clutch Functional brakes Functional rear linkage Functional PTO Complete and rolling tractor Condition of use corresponding to its age, with traces of wear and surface corrosion visible in the photos Beautiful antique Fordson Super Major tractor, mechanically functional and ready to use or form a good base for an aesthetic restoration. Auction-ID: A3-46111-36617

Has 4 wheel drive. 18hp. 474 hours. 6 forward gears + 2 reverse gears. PTO shaft with different speeds. Tiller: Including PTO. Working width 130cm. Auction-ID: A3-46111-8234

Track-mounted impact crusher plant/ impact mill SBM REMAX 1318/11E/D-S1 Year of manufacture 2004 + approx. 15,100 operating hours Deutz diesel engine 314 kW + generator set 300 kVA Crawler undercarriage  Feed hopper 4.5 m³ Vibratory feeder with stepped grate pre-screening Side discharge conveyor Secondary screening unit with return belt 2 pcs stockpile belts (fine-grain belt can be swivelled) Weight approx. 47 t Transport dimensions: length 17.5 m x width 3 m x height 3.75 m Crusher discharge chute does not work (electrical problem) otherwise good, operational condition  Net price ex site 95,000,-- € + VAT Sale from location D - BL Thuringia Code Q19

Agricole Tracteur John Deere 7R 350 Gen 2 en excellent état général, très bien équipé et fonctionnant parfaitement. Characteristics : Marque : John Deere Model : 7R 350 Gen 2 Premiere immatriculation : 07/02/2024 Heures : environ 1 516 h Diesel engine Cylindrée : 8 984 cm³ Puissance homologuée : 285 kW Norme environnementale : Stage V Transmission 50 km/h Masse en ordre de marche : 13 100 kg Maximum techniquement admissible : 16 000 kg Number of châssis : 1RW7350SPPD130436 Immatriculation belge Configuration Full Options, à l'exception de la prise de force avant Relevage avant Relevage arrière Horse force with 540E / 1000E / 1000 rpm Nombreux distributors hydrauliques Commandes électrohydrauliques Terminal tactile John Deere CommandCenter CommandARM avec joystick multifonction Prééquipement GPS / guidage John Deere Vendu sans récepteur GPS Syst ...

Professional tray packaging machine ORVED VGP-60 COMBI SKIN. Condition according to inventory: Refurbished. Brand: ORVED. Model: VGP-60 COMBI SKIN. Internal reference: RS03199_AFR. Code indicated in inventory: 0126CK-B5. Serial number / identification indicated in inventory: ITMSVGPSK00058. Configuration indicated in inventory with B5 mould. Professional equipment for packaging food in trays using Skin technology, vacuum, modified atmosphere (MAP) and heat sealing. Vacuum pump with a nominal capacity of 60 m³/h. Power supply: 400 V / 50-60 Hz / three-phase. Maximum reference electrical power: 2.9 kW. Professional stainless steel construction. Reference B5 tray dimensions for this generation: approx. 229 x 143 x 28 mm.Maximum overall tray dimensions supported by the machine: approx. 325 x 260 x 120 mm.Interchangeable mould system for different tray formats. Skin system for adhering the f ...

Mirofret 3-Axle Refrigerated Semi-Trailer Manufacturer: Mirofret Equipment type: Refrigerated Semi-Trailer Axles: 3 Classification: FRC Three-axle insulated refrigerated semi-trailer designed for temperature-controlled road transport of chilled, frozen and other perishable goods. Equipment / specifications: Carrier Phoenix Ultra refrigeration unit Insulated refrigerated box body Double rear loading doors Landing legs Side storage / tool boxes FRC refrigerated insulated equipment classification Approx. dimensions (L × W × H): 13,600 × 2,550 × 4,000 mm Approx. weight: 9,000 kg Condition: Used. Refrigerated body, rear doors, landing legs, storage boxes and Carrier refrigeration unit appear present. Cooling performance, refrigeration system, brakes, suspension, tyres, lighting and overall roadworthiness should be verified before use. Auction-ID: A7-51404-5

2025 hydraulic cone splitter – CW10 – midi excavator – including transport frame Specifications: Year of construction: 2025 Type: hydraulic cone splitter / log splitter Machine Mount: CW10 Suitable for suitable midi/excavators Hydraulically driven version Required: double-acting hydraulic function on carrier machine Hydraulically required flow rate and working pressure: not determined Own weight: not fixed Features: Heavy Duty Hydraulic Rotary Motor Robust conical screw cone Coarse spiral thread Pointed centering tip for gripping the wood Hydraulic drive for high torque Hydraulic hoses Hydraulic Quick Couplings Heavy duty welded steel motor/drive housing Black drive unit CW10 Quick Change Pickup Steel transport/storage stand Transport stand with fork sleeves for moving with pallet forks or forklift Particularities: New/unused condition, see photos ...

Features: Cutting deck Sweeping deck/Extra filter insert Hydrostatic drive Hydraulic tipping PTO drive Auction-ID: A1-47396-853

Equipped with: Winch: Böcker HY 1010 pulling force 17.0 kN, Hydraulic telescopic boom, Hydraulic slewing ring, Hydraulic stabilization, no hour meter, tandem axle, Auction-ID: A1-47396-1772

Manufacturer: COPRODIS Equipment: double axle, non-slip metal platform, two rear loading ramps with wooden surface, drawbar with drawbar and inertia braking, front stand, galvanised metal structure. Notes: Used trailer. Visible registration: BV-472-RJ. Auction-ID: A1-51439-21

• Engine Power: 16 HP (11.8 kW) @ 2500 rated RPM. liquid-cooled, 3-cylinder inline diesel engine. • Transmission: Highly versatile manual gearbox configuration, typically delivering up to 9 forward and 9 reverse speeds with a synchronized shuttle shift reverser (6F/3R base variants also exist). • Drive System: Mechanical Four-Wheel Drive (4WD / 4x4 MFWD) equipped with a rear differential lock and a \"Quick Turn\" cornering assist function. • Power Take-Off (PTO): Rear independent PTO offering multi-speed variations (standard 540 RPM range) plus 1 reverse PTO setting to clear clogged attachments. • Hitch System: Standard rear 3-point • Operating Weight: approximately 1,786 lbs (810 kg) Auction-ID: A1-51192-11

Equipped with: Honda petrol engine, chass number: W09K1720381KB6882, maximum permitted weight 2,600 kg, tandem axle with axles of 1,300 kg each, maximum lifting capacity 500 kg at 7.5 m reach, main boom 6.53–14.80 m, rockable auxiliary boom 4.20–8.25 m, outrigger base 4.84 × 4.80 m, hydraulic working pressure maximum 180 bar, crane classification H1/B3, Auction-ID: A1-47396-1770

RHIMA Professional Warewashing Installation – PRM-7 + WD-7 Plus Professional RHIMA dishwasher installation, consisting of a pre-washing machine and pass-through dishwasher. Suitable for intensive use in hospitality, industrial kitchens, catering and company kitchens. Brand: RHIMA Pre-washing machine: Type: PRM-7 Serial Number: WD2320692 Pass-through dishwasher: Type: WD-7 Plus Power: 12 kW Equipped with condenser unit Serial Number: WD2320107 Also equipped with: Stainless steel supply and discharge tables Sink Connection set Professional complete dishwasher line with separate pre-wash unit, main dishwasher and work/sink tables. Condition: used. Auction-ID: A1-47451-1302

Case ih magnum Mx 180; tow bar adjustable; front linkage; all around as good as new tires; 8.3 Cummins engine; speed 47kmp; AIR BRAKE SYSTEM; Auction-ID: A1-47396-1118

1998 Niftylift 170HDE Trailer Boom Lift – 17.1 m Working Height – Kubota Diesel – 200 kg Specifications: Brand: Niftylift Type: 170HDE Year of manufacture according to type plate: 1998 Serial number according to type plate: 17-5313 Working height: approx. 17.1 m Horizontal working range: approx. 8.7 m Maximum safe working load: 200 kg / 2 people Platform dimensions: approx. 1,100 × 650 mm Own weight: approx. 2,000 kg Transport dimensions: approx. 6,200 × 1,600 × 2,150 mm Engine: Kubota OC60E single-cylinder diesel engine Drive: diesel with hydraulic system Version: trailer aerial platform Made in Britain Features: Hydraulically operated telescopic/articulated arm Hydraulic stabilizer system Swivel work cage Electrical control from the work cage Drawbar with overrun brake Lighting Tires Auction-ID: A1-47396-2234

Machine type: Crawler excavator Manufacturer: Volvo Construction Equipment Model: EC210CL Year of manufacture: 2007 Serial number: VCEC210CJ00110668 Operating hours: approx. 8,967 h Technical data: Operating weight: approx. 22,960 kg Engine power: 110 kW Engine: Volvo diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Signs of wear and scratches - Engine visually complete Remarks: - Popular 20-ton class excavator - Suitable for general construction and earthmoving Own mass: approx. 22,960 kg Auction-ID: A1-50932-79

Please note; French registration, battery bad, needs to be started, switch forward/reverse does not work properly, no brakes, 4x DW valve, 1xEW valve on side, led work lights, fender control lift, 3 point lift, PTO, PTO 540/1000 Rpm, 4x DW valve, hydraulic brake valve, 3x 7 pin plug, heating, air conditioning, lock, front suspension, radio, roof hatch Auction-ID: A1-47396-1604

Brand: New Holland Model: E135SR Year of manufacture: 2011 Serial number (PIN): YH04-05-197 Power: Engine power: 69.2 kW Working parameters: Operating weight: 15,400 kg Undercarriage: Steel tracks Cab: Enclosed ROPS/FOPS cab Boom: Mono boom Bucket: Digging bucket included Quick coupler: Yes, hydraulic quick coupler Dozer blade: Yes Compliance: CE marked Made in Japan Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Hour meter reading: approx. 10,756 h. Approximate own mass: 15,400 kg. Auction-ID: A1-50932-81

Ford Transit horse truck / horse transporter with fixed body Features: Closed fixed horse body Side loading ramp / ramp with non-slip surface Spacious side opening for loading and unloading Internal horse partitions Metal Safety/Separation Fences Chest/safety bars Protected sidewalls Raised body Ventilation grille Multiple windows Roof hatch Interior lighting Storage space at the front of cargo space Various attachment/tie-down points All-round lighting Backdoor Step at the rear Cab equipped with roof spoiler Particularities: PLEASE NOTE: this vehicle has a license plate registration. Upon collection, the vehicle must be registered with a third party on site or exported. There are additional costs associated with this. Used condition with visible signs of wear and age. The interior and horse furnishings show signs of wear. Damage and deformations are visibl ...

Manufacturer: Caterpillar (CAT) Model: 365 Machine type: Crawler Excavator – Mass Excavation Application: Heavy earthworks; quarry; stone and ballast operations; high-volume excavation Engine: CAT C15 ACERT diesel engine Engine power: 411 HP (approx. 306 kW) Configuration: 6-cylinder Bucket capacity: approx. 4,65 m³ Maximum digging depth: approx. 9,5 m Maximum working height: approx. 12 m Hydraulic system: Additional hydraulic lines for shear, hydraulic hammer, rotating bucket, pulverizer, grapple Quick coupler: CW70 Fuel system: Integrated fuel supply pump Undercarriage: Heavy-duty steel tracks Condition: Used; suitable for heavy-duty excavation works Remarks: Dedicated machine for large excavation volumes; robust structure for demanding applications, tank capacity 800l, chains 80% good Own mass: approx. 65,000 – 70,000 kg Auction-ID: A1-50932-12

Equipped with: 4x double-acting rear hydraulic valves, air brake connection, hydraulic brake connection, air suspension cab, fender control, work lights, beacon, front linkage, 1x double-acting hydraulic valve front Auction-ID: A1-47396-1702

Manufacturer: Caterpillar (CAT) Model / Part number: 6Y-180 Machine type: Track chain assembly (crawler chain) Application: Undercarriage replacement / spare part Configuration: Track chain links with pins and bushings (pads not mounted) Material: Heavy-duty forged steel Remarks: Suitable for CAT crawler equipment depending on 6Y-180 specification; Auction-ID: A1-50932-162

Please note; Tire on the right front is slowly deflating. (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47396-2510

STAS S234CX 2-axle aluminium tipper trailer – 27.990 kg payload – grain scrapers – 2009 Specifications: Brand: STAS Type: S234CX Version: C1B / A12 Chassis number: YE6S234CX8A120463 First registration: 15-12-2009 Construction Date: 2009 Body: aluminium tipper Tipping Direction: Backward Number of axles: 2 Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre profile: approx. 30% all around Axle distance: approx. 1.30 m Technical axle load: approx. 10,300 kg per axle Tare weight: approx. 5.010 kg Payload: approx. 27,990 kg Maximum permissible total weight: 33,000 kg Overall dimensions: approx. 800 x 260 x 270 cm (L x W x H) Cargo box colour: green Features: Lightweight aluminum body Hydraulic reverse tipping function Hydraulic telescopic tipping cylinder at the front Double rear doors 2 manually operated grain chutes/d ...

Type: Hydraulic Crawler Excavator (Long Reach) and a second arm used for digging (pictures added) Manufacturer: Hitachi Construction Machinery Model: ZX350LC-3 Year: 2009 Serial number: HCMBFP0000054463 CE Marked: Yes Operating hours: approx. 16,211.2 h Operating mass: 41,300 kg Engine power: 202 kW Engine: Isuzu diesel engine Undercarriage: Steel tracks Boom: Long reach boom Stick: Long reach arm Attachment: Demolition attachment (as photographed; filmed); NOT included Cab: Enclosed ROPS cab with front protective guard and additional monitoring equipment installed Manufacturer location: Hitachi Construction Machinery (Europe) NV, The Netherlands Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Own mass: 41,300 kg Auction-ID: A1-50932-59

Fendt Favorit 615 LSA Turbomatik E 4WD – 185 hp – front linkage – 1991 Specifications: Brand: Fendt Model: Favorit 615 LSA Version: Turbomatik E Type: FWA 385 Year of construction: 1991 Serial Number: 385/21/2557 Hours: 13,776 hours read Engine: MWM TD 226 B-6 Engine type: 6-cylinder turbodiesel Displacement: approx. 6,240 cm³ Engine power: 136 kW / 185 hp Maximum torque: approx. 703 Nm at 1,500 rpm Drive: 4WD / four-wheel drive Transmission: ZF synchronized fine stufengetriebe Gears: 20 forward / 9 reverse Turbomatik E hydrodynamic drive clutch Maximum speed: up to approx. 40 km/h, depending on version Rear linkage: 3-point Rear lifting capacity: approx. 7,410 kg Own weight: approx. 6,970 kg Maximum permissible mass: 7,500 kg according to type plate Length: approx. 4,700 mm Width: approx. 2,380 mm, depending on track position Height: approx. 2,900 mm  ...

Electric windows and mirrors, 5-speed manual, Radio/CD player, air conditioning, double cabin, tow bar Auction-ID: A1-47424-1763

Manufacturer: Xingtai Agro Scout Mfy Limited Model: SCOUT XT-404 Year of manufacture: 2023 Serial no.: WD231011002 Drive: 4WD Engine: Laidong KM490BT1 diesel engine Engine type: 4-cylinder diesel Rated power: 29.5 kW Maximum power: 40 HP Rated engine speed: 2,400 rpm Engine no.: L80T033928B Emission standard: GB20891-2007 Included equipment: Front-mounted hydraulic dozer/snow blade Rear-mounted stainless-steel fertilizer/salt spreader Rear hydraulic lifting system Enclosed cab with work lights and warning beacon Agricultural tyres Condition: Used, visually in good condition Remarks: Tractor and attachments are offered together as pictured. Auction-ID: A1-50932-56

Equipped with 6-cyl. \"Sizu\" diesel engine, 160 hp, PTO 540/540e/1000 rpm, 4DW hydraulic valves + 1, hydraulic brake valve, air conditioning, climate control, air suspension front axle, suspended cab, load sensing, headland management Auction-ID: A1-47396-22

Fendt Farmer 1E Classic Tractor – Fully Restored (1967) Specifications: Brand: Fendt Model: Farmer 1E Year of construction: 1967 Engine: 2-cylinder Features: Original lifting device Four new tyres New front fenders Completely renewed electrical installation Redesigned brakes Particularities: Completely restored and overhauled a few years ago Tractor completely sandblasted Professionally painted at a car paint shop in high-quality two-component paint (2K paint) Two-cylinder engine with new pistons and bushings Gearbox shifts well according to specification Brakes renewed Technically and optically in neat and tidy condition Suitable for enthusiasts, collectors, classic car events and hobby use Auction-ID: A1-47396-2356

Brand: Deutz-Fahr Model: Agroplus 95 Power: Engine: Deutz 4-cylinder diesel engine Engine power: approx. 70 kW (95 HP) Drive: 4WD Transmission: Mechanical / Shuttle transmission Working parameters: Operating hours: 6,741 h Cab: Enclosed cab with heating and ventilation Front loader: Stoll Robust F Maximum travel speed: 40 km/h PTO: 540 / 540E / 1000 rpm Included equipment: Stoll Robust F front loader (without bucket) Rear 3-point hitch Rear PTO Rear hydraulic remote valves Cab lighting Adjustable mirrors Year/Manufacturer: Manufacturer: SAME Deutz-Fahr Italia S.p.A. Model: Agroplus 95 Compliance: CE marked ROPS/FOPS certified cab Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Front loader attachment included; bucket not included. Approximate own mass: 3,800  ...

Machine type: Track excavator Manufacturer: Kubota Model: KX080-4 Year of manufacture: 2019 Serial number: 44884 Product identification number (PIN): JKUK0804L01H44884 CE marking: Yes Engine: Manufacturer: Kubota Engine model: V3307-CR-T-EF06 Engine power: 46.5 kW Emission standard: EU Stage V Fuel type: Diesel Operating hours: 5209 h (according to hour meter) Undercarriage: Type: Tracked Condition: Used, functional Cabin: Cab type: Enclosed cabin Equipment: Heating, working lights, control joystick Attachments: Front blade: Yes Bucket: Yes Remarks: Machine in used condition, showing normal wear corresponding to operating hours and age. Engine starts and runs properly. Hydraulic system operational. Visual signs of use on undercarriage and attachments. Sold as shown in pictures. Own mass: approx. 8,315 kg Dimensions  ...

Equipped with: working lights, cab, suspension seat, double PTO rear Auction-ID: A1-47396-1704

Kubota D750, 3-cylinder diesel 12Hp 8.8Kw maximum speed 11 km/h PTO PTO with 3 speeds rear linkage 4WD drive high / low low limited slip differential has had recent maintenance runs and works properly Auction-ID: A1-47396-250

Beautiful fully restored Eicher EM300 Königstiger. Technically completely overhauled. Engine fitted with new bearings, seals and gaskets. New clutch and pressure group. Completely sandblasted and newly painted. Complete with linkage and hydraulics. Get on and enjoy immediately! Equipped with German papers Auction-ID: A1-47396-2362

Equipped with: Kilometers trailer: 600949. Thermo King SLXe Spectrum multi-temperature refrigeration/freezing unit hours position 32942. and Dhollandia DHSM.30 hydraulic tail lift with 2,000 kg lifting capacity at 1,000 mm load center of gravity. Auction-ID: A1-47424-1751

Type: Hydraulic Crawler Excavator Manufacturer: Komatsu Model: PC700LC-8EO Year of construction: 2015 Serial number: K50035 Product identification number (PIN): KMTP C233CEKK50035 CE Marked: Yes Operating hours: approx. 7,457 h (displayed) Operating mass: approx. 66,330 kg Engine power: 320 kW Engine model: Komatsu SAA6D140E-5 Displacement: 15.24 l Fuel type: Diesel Emission regulation: 97/68/EC compliant Undercarriage: Steel tracks Boom/Stick: Mono boom Bucket: Heavy-duty bucket fitted (as photographed) Cab: Enclosed ROPS cab, air conditioning Noise level (cab sticker): 73 dB Remarks: Machine with visible signs of use consistent with operating hours. Display operational at time of inspection. Undercarriage and bucket show wear typical for size class. Overall condition as shown in photos and videos. Own mass: approx. 66,330 kg Auction-ID: A1 ...

BRIOT ALTA NX + ALTA XL Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-113

1996 Müller-Mitteltal 3-axle curtainsider semi-trailer – BPW – lift axle – steering axle – sunroof Müller-Mitteltal 3-axle curtainsider semi-trailer, built in 1996. Equipped with curtainsiders, sunroof, 3 BPW axles, air suspension, liftable first axle and steered rear axle. Specifications: Brand: Müller-Mitteltal Type: 3-axle curtainsider trailer / curtainsider Year of construction: 1996 Number of axles: 3 Axles: BPW Suspension: air suspension 1st axle: lift axle 3rd / rear axle: steering axle Braking system: drum brakes Tyre Size: 385/65 R22.5 Tyre tread 1st axle: left approx. 10 mm / right approx. 8 mm Tyre profile 2nd axle: left/right approx. 10 mm Tyre tread 3rd axle: left approx. 6 mm / right approx. 10 mm Tare weight: 5.900 kg Payload: 28,600 kg Maximum total weight: 34,500 kg Dimensions of cargo space: approx. 9,000 × 2,500 × 2,080 mm (L × W  ...

Manufacturer: Meiller Machine type: 2-axle tipper semi-trailer body (demountable) Model: Meiller MHKS / Asphalt tipper body Year of manufacture: 2004 Serial number (VIN): W09SHL2334MM08461 Permissible gross weight: 33,000 kg Axle load 1: 15,000 kg Axle load 2: 9,000 kg Axle load 3: 9,000 kg Suspension: Air suspension Brake system: WABCO EBS Body: Steel insulated tipper body with hydraulic rear tailgate Tarpaulin: Manual roll-over tarpaulin Rear platform: Yes Manufacturer: Meiller, München (Germany) Remarks: Insulated asphalt tipper body, suitable for hot asphalt transport. Air suspension, WABCO EBS braking system, hydraulic rear door, manual tarpaulin. Surface corrosion visible on tailgate and body edges. Trailer sold as shown. Auction-ID: A1-50932-136