tra used for sale

Transformer - Voltage transformer 5,000 Volt --> 690 Volt 1,600kVA Manufacturer Siemens Type TRA1600 Power 1,600kVA Primaer 3x5000V 185A Secondary 3x690V 1.339A Hz 50 Insulating-Kl. F-F Cooling type ON Weight 4.050kg Special price

Isolation travo, isolating transformer TRANS FORMER type FHT-18 K Year of construction 1979 Power secondary 47 Amp. Secondary voltage 3 phases 220 volts Primary connection in the triangle 3 phases 380-400-440-480 volts Primary connection in the star 3 phases 140-160-200-240 Volt - mounted in metal housing Space requirement L x W x H 610 x 425 x 580 mm Weight 145 kg; used

If you are interested we will send you photos! MACHINE DESCRIPTION: The MAS tray packer is a packaging machine that folds and glues an open tray (from a cutting) around the product formation. FORMATION: The machine sets 2 x 5 = 10 Tetra packs per tray. Machine dimensions: 3500-4500mm long depending on infeed conveyor. 2008mm width; Height 2000mm Performance: max 10 trays/min Electrical connection: 5% 50 Hz, 3-phase, 230/400 volts, approx. 8kW Energy consumption: 6 kWh Frequency 50 Hz 2% active power 1.18 kW Volume < 80 dB Electrical equipment: brand products, in accordance with standard MAS machine no. 6017, built 06/2006 Cabinet: Make Rittal V2A firmly installed on machine Pneum. Equipment: Make Festo Glue device: Nordson (3.6 kg tank capacity) with 2 hose system; Glue order volume with proportinal valve Compressed air: 6 bar (dry, oil-free) Air consumption: approx ...

Glass fibre stub (non-conductive) with aluminium frame, Sheet made of non-conductive fibre glass fiber composite, Entrance door for high-voltage penitohouse, heavy, stable emitting, with lueftunggitter, lockable, a total of 5 stubs available, unused. The luefting grid could be replaced, for example, by a disc. Installation example according to photo 3. Dimensions: width 1300mm Height 2120mm N7eaerb7 New price 1,500.-EUR / pc. Sales price per piece or gladly as a total package against bid Special price

For sale is a cold water set in top condition. Technical data: Manufacturer: Trane Model : RTUB 212 Built: 2008 Refrigerant : R134 a In a container super soundproofed. Completely runs flawlessly. Price is net plus VAT

Product number: 1949U Handtmann portioning device for ground meat Type: GMD99-2 Serial number: 1189 Year of construction: 2005 Air pressure: 7 Bar Tramper denester Type: D-3100 Serial number: 002 Year of construction: 2011 Capacity: 20 - 30 cycles/min. Dye: 5x R24, 3x R15 Air pressure: 6 Bar Dimensions: 3250 x 2200 x 2000 mm Weight: 310 kg Tramper tray filling system Type: TAS01 Serial number: 001 Year of construction: 2011 Dimensions: 5200 x 850 x 1600 mm Weight: 900 kg Tramper traysealer Type: S-460 Serial number: 001 Year of construction: 2012 Trays: R15 & R24 Capacity; max 15 cycli/min. Air pressure: 6 Bar Dimensions: 3100 x 1450 x 2150 mm Including 2 tool trolleys For vacuum and gas flush Including Witt gas mixing station

4 years manufacturer's warranty (except bulbs) Features / Functionality: - for non-toxic and silent control of wasps - Attracting wasps with a 32 watt UV round tube - a fan transports the wasps into a storage tank - in this storage container, the insects dry out in a short time - the device is designed exclusively for indoor use specifications: Power: 1 x 32 Watt UV round tube, device 220 V, 50 Hz, 50 Watt Dimensions WxHxD: 270 x 380 x 165 mm (hanging or stand-alone unit) Range: wide range of action Material: Plastic

Various trays and pots.

Transport belt with s/s frame and cloth belt, belt width: 280 mm, total dimensions: 3100 mm x 750 mm x 950 mm.

Transport belt with s/s frame and plastic belt, belt width: 390 mm, total dimensions: 3000 mm x 930 mm x 1250 mm.

Transport belt with s/s frame and plastic belt, belt width: 550 mm, total dimensions: 3250 mm x 900 mm x 1400 mm.

Transport belt with s/s frame and plastic belt, belt width: 500 mm, total dimensions: 2500 mm x 970 mm x 800 mm.

Transport belt with s/s frame and plastic belt, belt width: 180 mm, total dimensions: 1950 mm x 800 mm x 870 mm.

Transport belt with steel frame and cloth belt, belt width: 300 mm, total dimensions: 1870 mm x 600 mm x 1380 mm.

Transport belt with s/s frame and belt, belt width: 85 mm, total dimensions: 2350 mm x 500 mm x 1250 mm.

S/s frame for transport belt, maximum belt width: 250 mm, total dimensions: 3150 mm x 700 mm x 1100 mm.

France transfo mobile transformer, type: NBN HD, serial number: 41 4886-01, year of construction: 2007, 400 V, 230.9 A, weight: 800 kg, 160 kVA, dimensions: 800 mm x 1100 mm x 1380 mm.

France transfo mobile transformer, type: NBN HD, serial number: 695430-01, year of construction: 2004, 400 V, 230.9 A, weight: 880 kg, 160 kVA, dimensions: 1200 mm x 800 mm x 1560 mm.

France transfo mobile transformer, type: NBN HD, serial number: 409976-01, year of construction: 2006, 400 V, 225.3 A, weight: 915 kg, 160 kVA, dimensions: 800 mm x 1100 mm x 1380 mm.

Transport belt with 4 working stations, s/s frame, plastic belt, belt width: 370 mm, total dimensions: 4450 mm x 1300 mm x 880 mm.

Transport belt, s/s frame, plastic belt, belt width: 740 mm, total dimensions: 3900 mm x 1010 mm x 1330 mm.

Mobile retracting transport belt with sensors, s/s frame, plastic belt, belt width: 250 mm, dimensions: 3400 mm x 800 mm x 1700 mm.

Nominal load: 250kVA, weight: 950kg.

Transformatoren Technik Jahnsmüller TU6/90M Pri:115/230V 82/41A Sec:230V 39.1A Weight: 49.5kg

2x Transformator 1250 kva 21.000v / 400v 50 hz Weight 2860 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 ID.No. 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo identification plate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Dear Ladies and Gentlemen, we have transformer stations 250KVA 20KV on 400V built in 1992 See photos If you have any further questions, please call 00491727265324

PLC control, line filter, line filter, Simodrive choke transformer -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Throttle: Type 6SN 1111-0AA00-OBAO -Transformer: Trasfor TNT BN 2K5/E -Price/tax: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg

2500 KVA Transformer Year 2009

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Hydraulische Zwillingspresse - Hydraulic Twin Press Traenklein ZP 39 Year 1988 - Serial-No. 719 2 Pressplatten  / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf  / Place require 85 x 70 x 150 cm Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Marx Transformatorenbau GmbH & Co. KG Transformer Type: DAY 516 Pri: 3x480V/777A Sec: 3x400V /909A 60Hz 630kVA Two Wöhner LTS-3 630A load disconnectors are installed at the tap, each equipped with three Siemens 400A and 630A NH3-gG.

Available 3 unit of this oil transformer. Thre three units have perfect condition. The relation is 400-20000 V, and the power 1600kVA.

description: High quality control unit for pallet conveyors of a 50.000 bph filling line with several KHS control units For a total of frequency controlled drives, diverse protective switch drives /see photos for details) Switchboard with 2 pieces The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept.  ...

Tragrolle(n) industrial-grade diameter 80 mm length 500 mm steel ball bearings loads up to 200 kg Support rollers are suitable for heavy duty roller conveyors, roller supports, machine feeders etc. the roles are used but undamaged and have some light surface rust. the entire length of a roll is approximately 540 mm, the shaft has a diameter of 14 mm and an Aussparungvon ca. 10 mm on the shaft ends

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Trackball with connection cable for Ultimax control Replacement for Hurco Ultimax 4 , Ultimax 3 Easy to change, ready to ship New

Vacuum converter (vacuum bridge) for moving cans to remove lying cans from the production flow Capacity: 30000-40000 cans/h

DATA ON THE MACHINE Machine type: Roller curve conveyor / 90 degrees Manufacturer: Transnorm Model: 816-500 Built: 2007 Condition: very good (used) Price 1,200 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221 Description We offer you a used roller conveyor from the manufacturer Transnorm, incl. feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

DATA ON THE MACHINE Machine type: Roller conveyor / roller conveyor Manufacturer: Transnorm Model: 2900 Built: 2007 Condition: very good (used) Price 950 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221-1 Description We offer you a used roller conveyor from the manufacturer Transnorm, excluding feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.

Curved tape

A large number of conveyor belts, which are hardly used. The new price was approx. EUR 350 per meter! Manufacturer: Transnorm Length: 3 m 23 m Width: 500 / 600 / 800 mm Material: Aluminium price: 120 EUR per meter

Infeed with electric box 5 bands (a curve band)

Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Feet to be ordered separately Incl. SEW motor Incl. Guide Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 1.820mm Total width: 970 mm  ...

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.