We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,647 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts! Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...
used
Trane ECGAL 800 Water Chiller Chiller with 200 kW Cooling Capacity | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: Trane -Model: ECGAL 800 -Cooling capacity: 200 kW at 12/7 oC at 35 oC outside -Refrigerant used and its quantity: R407C / circuit A – 21 kg / circuit B – 21 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: 2000 -Connection pipes: 2 1/2" thread – DN65 -Operating range: -8 oC to 45 oC -Additional information: water pump: NONE -Number and also type of compressors: 6 pcs. Danfoss scroll compressors -Dimensions: width – . mm; length – . mm; height – . Mm -Weight: approx. 2000 kg Device available immediately Check out our other cooling/heating equipment...
used
Agregat wody lodowej chiller Trane CGAN210 o wydajności chłodniczej 316 kW | ChillerTech - Chillery używane dostępne od ręki Podstawowe informacje: -Producent: Trane -Model: .CGAN210 -Wydajność chłodnicza: 316,8 kW w parametrze 12/7 oC przy temp. na zewnątrz 35 oC -Zastosowany czynnik chłodniczy oraz jego ilość: R407C / sekcja A – 41,00 kg / sekcja B – 41,00 kg -Ilość obiegów chłodniczych: 2 obiegi chłodnicze -Rok produkcji: 2009 r. -Króćce połączeniowe: połączenia rowkowane 4″ – fi110 -Zakres pracy: -9 oC – 24 oC -Wymiary: szerokość – 2230 mm; długość – 5135 mm; wysokość – 2323 mm -Waga całkowita: 3290 kg -Waga operacyjna: 3486 kg -Wersja cichobieżna (low noise): TAK -Soft starter (łagodny start): TAK -Płynna regulacja temp. skraplania (przemienniki częstotliwości): TAK Urządzenie dostępne od ręki Sprawdź inn ...
used
used
used
used
Machine Details Stock number 1105-03756 Machine type CNC turning and milling center Brand TRAUB Type TNA 300 Year of construction 1996 Control type CNC Control Traub TX 8 H Storage location warehouse Country of origin Germany Delivery time by arrangement Freight base EXW Technical details Turning length 450 mm Control Traub TX 8F Turning diameter above the paddling carriage 275 mm Turning diameter over bed 400 mm Speed range 4000 rpm Number of tools 12 pcs. Sledge path plan 210 mm Sledge path lengthwise 450 mm Quill diameter 75 mm Quill stroke 125 mm Total power requirement 22 kW Machine weight ca. 3.2 t Space requirement approx. 3 x 2.00 x 2.10 m Information 3 AXIS MACHINE WITH LIVE TOOLS incl. chip conveyor 12-cavity tool turret SAUTER with 12-cavity tool turret VDI 30 MIT DRIVEN TOOL HOLDERS AND C AXIS Towing tailstock with quill Three-jaw power chuc ...
used
bar material dia.: 12 - 42 mm bar length: 3200 mm feed speeds: 220 mm/sec return speed: 440 mm/sec feed power: bis 400 Nm compressed air: max. 6 bar filling capacity: 22 Stangen x ø 12 mm filling capacity: 13 Stangen x ø 20 mm filling capacity: 7 Stangen x ø 42 mm hexagon material: bis SW 27 mm square material: bis SW 20 mm total power requirement: 0,75 kW weight of the machine ca.: 0,83 t dimensions of machine L x W x H: 5,06 x 0,85 x 1,275 m = bar loading magazine, compressed air controlled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Details Stock number 1105-03766 Machine type machining center - vertical Make HEKERT TRAUB Type CSK 300 Year of construction 1996 Control type CNC Control Fanuc OM Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base freely loaded from location Technical details x-travel 400 mm y-travel 300 mm z-travel 400 mm Spindle speeds 8000 rpm Control Fanuc OM Clamping table 500x300 mm Magazine slots 16 pieces Tool holder SK40 Distance working spindle/clamping surface max. 50-450 mm Number of pallets 600 X 300 TABLE Total power requirement 10 kW Machine weight ca. 3.2 t Dimension machine LxWxH 2,4x1,8x2,5 m Transport dimensions 2,45x1,8x2,5 m Information CONTROL FANUC OM 8000 RPM E-cabinet Cooling device
used
Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to approx. 30 straps per minute. -Frame interior dimensions approximately: clear width 850 x clear height 600 mm. -Fixed strapping by 12 mm strap. -Automatic tape threading. -Strap tension infinitely adjustable. -Manual release / automatic operation selectable (sensor in the table top). -Uncomplicated and ergonomic bobbin changing and threading system. -Designed with ergonomic roller conveyors on the table surface. machine can be moved and locked via castors. The machine can be demonstrated under power.
used
- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list
used
- Pipe diameter max. 76.1 mm - Pipe sliding length max. 4,500 mm - bending radius 200 mm - Bending direction right - electronic 1-axis control - Twist angle unit with stops - electronic display of rotation - electronic display of the longitudinal position - Mandrel lubrication man. - L x W x H approx. 5,700 x 850 x 1,150 mm - Weight approx. 1,700 kg
new
: 1050 mm : 480 mm : 550 mm : 1500x380 mm : SK 40 : 127 mm : 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 1200 mm : 580 mm : 550 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0915 mm : 380 mm : 430 mm : 1370x254 mm : SK 40 : 127 mm : 86 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Horizontal cylindrical tank made of carbon steel according to EN 10025 with a high-quality surface treatment. The tanks are subjected to a pressure test in production with the issuance of a test certificate. Single-wall tanks fully comply with standards and laws and meet strict conditions for the storage of petroleum substances. Year of manufacture 2018 manufacturer BENOL Trade, s.r.o.
used
21000 / 380 V, Power (KVA): 1000
used
properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we ar ...
used
Machine is in good condition Max bar diameter mm. 36 Spindle speed rpm / min 6300 Machine is in good condition
used
Different carton formats can be packed Trays 1-row/2-row and 3-row from flat blanks With hot glue unit Siemens SPS Autocad Plan can be supplied on demand
used
Different carton formats can be packed Trays 1-row/2-row and 3-row from flat blanks With hot glue unit Siemens SPS Full complete scope of supply Autocad Plan can be supplied on demand
new
cutting diameter: 330 mm saw band length: 4100 mm cutting width: 480 mm round: 330 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
For sale, Trabattoni Roaster Completely Overhauled Complete With Green Coffee Loader And Stone Silos. LPG and methane burner.
used
90 Degree Curve / Curve / Conveyor / Conveyor Belt Manufacturer: Transnorm Type / Model: 1500-80 Belt Type: KT58 Condition: Used Total length outside: approx. 1750 mm Total length inside: approx. 770 mm Total width incl. motor: approx. 730 mm Total width without motor: approx. 600 mm Conveyor width/ belt width: approx. 500 mm Strap Type: Smooth Material: Aluminum/ Steel Including SEW motor (0.37 KW) Stock: 2 pieces Price per piece The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined convey ...
used
Immediately available from location : CNC lathe TRAUB Type TND 300 Built in 1991 CNC control TX 8 F Spindle bore 42 mm Circulation over bed 400 mm Circulation via flat carriage 170 Revolver 12 speed 6 powered tools Tailstock Turning length 500 mm Lining 160 mm Drive power 18 kw Spindle speeds 56 – 5600 rpm Drive driven tools 3 / 5 kw Speed driven tools 6000 rpm Conveyor Coolant system Weight 3.8 tons Dimensions: 2498/1990/2005 mm Prior sale and errors excepted. The machine is sold as it stands in the hall. The buyer can view the machine under power with connection options. Currently, it is not energized.
used
Transfluid EDB 642CNC Tube Bender Year 2020 ROUND TUBING MILD STEEL 1.65" X 0.118" ROUND TUBING STAINLESS STEEL 1.65" X 0.059" MAXIMUM MOMENT OF RESISTANCE 3.4 CM3 (S235) BENDING ANGLE UP TO 180 DEGREES +10 DEGREES SPRING BACK BENDING TIME MAXIMUM 180 DEG./SEC (FRONT FEED) SPEED OF FRONT FEED 1600 MM SEC SPEED OF ROTATION MAXIMUM 450 DEGREE/SECOND REPETITION TOLERANCE BENDING +/-0.05 DEGREES REPETITION TOLERANCE LENGTH +-0.05 MM REPETITION TOLERANCE ROTATION +/-0.05 DEGREES ARBOR LENGTH/USABLE LENGTH 120" RADII MAX. 6.61" BENDING HEIGHT 45.27" BOOSTING FORCE LENGTH POSITIONING 2.5 KN APPROXIMATE DIMENSIONS 296" X 63" X 63" APPROXIMATE WEIGHT 12,100 LBS. EQUIPPED WITH: TRANSFLUID CNC CONTROL WITH WINDOWS 10 OPERATING SYSTEM AND 22" WIDESCREEN MONITOR SERVO ELECTRIC POWER BENDING AXIS SERVO ELECTRIC POSITIONING OF THE ROTATION LENGTH ALL OTHER AXIS SERVO ELECTRIC ...
used
Cooling capacity: 37 kW (12/7 — 35°C) Year of manufacture: 2014 Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Danfoss (scroll) Type of refrigerant: R-407C Heat exchanger: Plate Number of fans: 2 pcs. Hydraulic module: water pump, buffer tank, expansion vessel Dimensions: 2.20 х 1.05 х 1.73 m. Weight: 740 kg. Working hours: 7750/1760 h. Condition: Good
used
V-Trade X300 Year of construction: 2012 more information will follow incl. accessories
new
MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning
used
This Traub TNS 26 DGY Lathe was manufactured in the year 1991. It is equipped with a Traub TX8F control unit. The machine has a spindle speed of 7000 rpm.
used
This TRAUB TNC 42/65 Lathe was made in 2007. There are 2 units available.
used
This TRAUB TNE300 Lathe was manufactured in 1999 in Germany. It has a turning length of 450 mm and a turning à of 275 mm. The turning speed is 4,000 rpm. This turning machine is operated with a TRAUB System TX 8H control. It has 2 axes (X-axis 210 mm, Z-axis 450 mm). Contact us anytime for further questions!
used
This Traub TNC 42/65 DGY Lathe was manufactured in the year 1995 and has 13000 production hours. It is equipped with a TRAUB TX8F control unit. The machine has a spindle speed of 4000 rpm.
used
bar length: 63 mm bar length: 4200 mm weight - pallet system: 2380 kg dimensions of the machine ca.: m weight of the machine ca.: t air volumen: m³/h Heat output capacity: KW bar diameter min. 18mm / max. 63mm bar lenght min. 1000mm / max. 4200mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Properties: Condition: fully functional, with traces of use Ideal for fast material transport Expertly dismantled and packed Manufacturer: Transnorm Year of construction: 2023 Model: 1100 Condition: Used Total length: approx. 2,000 mm Total width incl. frame: approx. 142 mm Total width: 1.100mm Belt width: approx. 100 mm Strap type: Smooth/Black Material: Steel/Aluminium Frame height: approx. 90 mm Including frame Including SEW motor Belt conveyors Due to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to prepare your individual offer or advise you on the conception or installation iss ...
used
Description
used
Description
used
Used / cleaned CNC lathe with different clamping axes. Tools on the moulds are not included. Optical tool measurement. Optional instruction manual available.
used
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
equipped with: wheels; 3m cable welding torch; 3m ground cable PLEASE NOTE: C02 bottle not included
used
-Automatic lathe, single-spindle automatic lathe; -Workpiece diameter max 15 mm; -Turning length: 70 mm.
used
-Automatic lathe, single-spindle automatic lathe; -Workpiece diameter max 25 mm; -Turning length: 70 mm.
used
Transnorm conveyor belt curve not quite 180 degrees - used - : Belt curve: Price (net): 1.750.-€ Manufacturer: Transnorm Special degree number Type: 1600 – 105 Year: 2008 Outer diameter approx. 3,30m Further information can be obtained BC 074
used
approx. 2 pieces Transnorm inschleuser / inclined belt conveyor - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 6200-00 Nominal briete / belt width: 800mm SEW Motor Condition: good Available: as of now Location: Frankenberg Sachsen warehouse These are the two lower parts on the pallet – unfortunately there are currently no better photos.
used
Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import
used
Trane chiller mod.GN400E72D2XDDXX1, 102 KW, YOC 2006, refrigerant 407C, with pump and glycol tank below. In very good condition, little operating hour only 2124 hours.
used
Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.
used
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
used
Max. turret slide stroke: 100m, fast retraction stroke: 50mm, max. through-feed radius: 216mm, max. through-feed width: 110mm, connected load: 0.75kW, with bar feeder and documentation, on-site inspection is possible.
used
Connected load: 2.6kW, length: 700mm, width: 1700mm, weight: 710kg, including bar feeder IEMCA MINI BOSS 325 CNC/ 32, with documentation, on-site inspection is possible.