tra used for sale

Transnorm conveyor belt GF 2250-600-500 RA2389 Technical data: Make: Transnorm Conveyor length (NL): 2250 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,15-0,80 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,15-0,80 scope of deli ...

General Manufacturer: Transmatic Type: TS-3M Year of Make: 2007 Plate size: 38 x 38 cm Maximum pressure: 600 g/cm2 Temperature setting: 50 – 305°C Condition Condition: Used Functional: Tested and fully functional

Manufacturer: Transportrollengang, Total metres approx.: 2,2, Working widht mm: 800, Total hight mm: 280, Adjustable: yes, Rollenteilung mm: 200, Rollendurchmesser: 80, Driven: yes, Working widht mm: 800, Width total mm: 1000, Drive power kW: 1,

Manufacturer: Bürkle Transportband, Working length mm: 4900, Working widht mm: 1300, Total hight mm: 910, Frequency converter: möglich, Total hight mm: 910, Engine power kW: 0,75, Feeding speed min-max m/min: 8-30,

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Manufacturer: Transportbandkurve unbekannnt, Control: no, Belt transport: yes, Working hight mm: ca 450 mm, Engine power kW: ca.0.75, Wight approx. kg: 600,

Manufacturer: Hackemack Rollgang, Type: Transportrollengang, Year: 1990, Total metres approx.: 5, Working widht mm: 1400, Total hight mm: 980, Roller pitch mm: 120, roller diameter: 60, Length mm: 5000, Accumulation roller conveyor: yes, Working widht mm: 1400, Conveyor speed m/min: 5-30, Drive power kW: 1,5, Operation side kW : rects, Stauerollen 1000 mm länge, Year :1990

Manufacturer: Bürkle Transpportband, Year: ca 2000, Working length mm: 2500, Working widht mm: 1450, Total hight mm: 900, Belt width: 1450, Own controller: no, Year :ca 2000

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

Manufacturer: Tranpporband <CRLF>Abdeckung, FREETEXT1: Länge 2580 mm, FREETEXT2: breite, FREETEXT3: Breite 1580 mm, FREETEXT4: Durchlasshöhe 100 mm,

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: Hackemack Transportband, Working length mm: 2500, Working widht mm: 1300, Own controller: no, Bandsteuerung : yes, Total power kW: ca.0.75, elektronisch regelbar: 6-30,

Manufacturer: Venyeskob 2 Stück 90 Grad, Type: Transportbandkurve, Year: ca, Inner radius in mm: ca.4500, Working hight mm: 890, Feeding speed max m/min: 6-30, Engine power kW: ca 2 X 1,5, FREE TEXT: eine Kurve ist überbaut, Year :ca

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: Bürkle Transportband, Year: 2002, Working length mm: 3000, Working widht mm: 1400, UV-Band: no, Belt width: 1420, Own controller: no, Bandsteuerung : no, Engine power kW: 0,5, Feeding speed min-max m/min: 6-30, elektronisch regelbar: möglich, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :2002

Manufacturer: Geldmeier, Type: Transportrollgang, Driven: yes, incl.control: no, Length-width mm: 2500 X 890 X 800, Length mm: 2500, Width total mm: 800, Total hight mm: 890, Adjustable: yes, Conveyor speed m/min: regelbar über Umrichter,

Manufacturer: Transportrollengang, Type: unbekannt, Rollenbahn L: ca.10000 mm, Length-width mm: 10000 X 800 X ca.950, 1 Stückzahl : 1,

Manufacturer: Tranportkurve, Year: ca.1995, Outer radius mm: 6600, Inner radius in mm: 3450, Belt transport: yes, Feeding speed max m/min: 5-15, Feeding speed min m/min: ca.2, Year :ca.1995

Manufacturer: Hackemack Transportrollengang, Type: Rollgang, Year: ca.1990, Working length mm: 2100, Working widht mm: 1460, Engine power kW: 0,5, Durchmesser Rolle mm: 60, Rollenmittenabstand: 140, Wellendurchmesser: 25, angetrieben über Rundriemen: yes, Total hight mm: 890 +- 50, Total hight mm: 890 +- 50, Feeding speed continous adjustable: yes, Year :ca.1990

Manufacturer: Transportband, Working length mm: 1800, Working widht mm: 1300, Engine power kW: ca.0,5, Feeding speed max m/min: Regelbar, Feeding speed continous adjustable: 3-10, FREE TEXT: Fahrbar,

Manufacturer: MTH 150/28/08 Ligmatech Korpussabsetzer, Type: Transport und Absetzstation, Year: 2011, Control: no, Working hight mm: ca.400-1200, Machine from production line: war in Linie, Belt transport: yes, Belt width: ca.800, Engine power kW: 0,5, Feeding speed max m/min: 5-20, Feeding speed continous adjustable: möglich, Year :2011

Manufacturer: SBA Trafo, Type: SFT, aus Maschine: UV Trockner, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C=4Uf, Hz 1: 50, V2: 6000,

Manufacturer: IMA, Type: Transportkette, FREETEXT1: Platten 74x182, FREETEXT2: 2x 31.680 mm mit Noppen, FREETEXT3: 2x 22.590 mm ohne Noppen,

Manufacturer: Bürkle, Type: UV Transportband, Year: 2001, Work piece width min-max mm: 1350, Lampen gerade eingebaut: 1, Conveyor lenght mm: 5000, Drive power kW: 1,1, Year :2001

Manufacturer: Venyeskob, Type: Transportrollengang, Year: ca.1995, Working widht mm: 1300, Total hight mm: 950, Roller pitch mm: 150, roller diameter: 80, Length mm: 2500, Driven: yes, Working widht mm: 1300, Conveyor speed m/min: 5-25, Year :ca.1995

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: good (used) Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven:  ...

Key data: 65 mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Transnorm curved belt conveyor left bend 180°-650-500 IR600 RA2398 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 650 mm belt width (GB): 500 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,5 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: very good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 650 Belt width in mm: 500 angle: 180° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: withou ...

Transnorm curved belt conveyor replacement part TS1500 RA2399 Technical data: Model: TS1500 Transnorm Item number: 6004-2RS 12 pieces inkluding: Bearing Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: No information

Transnorm spiral helix belt curve conveyor left 90°-825-600 IR600 RA2401 Technical data: Type designation: belt curve conveyor TS 1600-105 Helix frame width (NB): 825 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 260 mm rising) Incline: 260 mm / 90° = 1040 mm / 360° Support feet: optionally available Conveying speed (v m/s): 0.4 Drive: SEW gearmotor Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT106 (wear see pictures) year of construction: 2006 Optionally available: Supports Side guide one and both sides frequenzy converter for steples speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) scope of delivery: including Movimot frequency converter, without supports and side guides Driven: YES N ...

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - / Contact us at -

Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...

Type: MI 70 FP F3 30/1 ratio

Type: SW/075T

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible.

Multivac T700, The dimensions of the trays are 187x137 ( approx.) and 145x125 (approx.).

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator., container content: 4000 l , Flow rate max: approx. 360 l/min., Filter fineness:: greater than 0.003 mm, Connected load approx.: 9.0 kW (400 V / 50 Hz), Dimensions W x D x H: 6000 x 1200 x 1650 mm, Weight approx.: 2000 kg, colour: light grey

CNC swiss type lathe Traub TNL 32-7, - Model TNL32/TNL32K, - Controller TX8i-s, - Main spindle max. diameter 32 mm, with C-axis, - Counter spindle including parts discharge, - Top revolver X/Y/Z/H-axis: 10 tools dual drive, - Bottom revolver X/Y/Z/H-axis: 9 tools same drive; counter spindle independent drive, - Conveyor belt for finished parts with gripper, - Coolant pump 3 bar, - Coolant pump 8 bar, - Swarf conveyor, hinged belt type H=1000 mm, - Linear encoder X-axis for revolver top/bottom, - Fabric filtration for coolant: grade of filtration ca. 30-40 µm, - High pressure coolant pump 20 bar, - CO2 fire fight system Kraft & Bauer, - Auto bar loader FMB LSK 38, max. bar length 3,2 m, Machine worked only with cutting oil, Country of origin: Germany, Control: TX8i-s, Operating hours: 55.000 | 36.000, Max bar dia. [mm]: 32, Spindle speed [rpm]: 8.000, Spindle stock stroke [mm]: 305, Weig ...

Suitable for cleaning cooling oil for grinding hard metal. Accessories: 2 filter towers, Automatic backflushing, Chiller, container content: 800 l, flow capacity max: 60 l / min., Flow rate max: 60 l / min., Filter fineness:: greater than 0.003 mm, Connected load approx.: 9.0 kW (400 V / 50 Hz), Dimensions W x D x H: 1700 x 1100 x 2400 mm, Weight approx.: 710 kg, colour: light grey

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project

An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.

turning diameter: 700 mm turning length: 1250 mm control: TX8_i total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6,0 x 2,5 x 2,2 m CNC control TX8_i 9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1, C2) Software functions: Tool life monitoring, Polyform, 3D-Helical IP, synchronous threads without L compensation, WOP Traub Win_Flex IPS incl. Mouse, MAIN SPINDLE (direct drive, adjustable hollow shaft motor) Spindle connection A-11 > DIN 55026/ 55021 Alignment and switching device Hollow clamping cylinder > spindle passage max. 102 mm speed max. 3,000 rpm Front bearing dm170 mm Drive power 100/40% ED 53 / 68 kW, torque 675 / 900 Nm C-axis resolution 0.001 ° Spindle locking for extreme roughing work 2.5 ° Counter spindle (direct drive, adjustable hollow shaft motor) Spindle connection A-11 > DIN 55026/ 55021 Alignment and switching device Full clamping c ...

Transnorm conveyor belt GF 16950-900-750 RA2213 Technical data: Conveyor length (NL): 16950 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 750 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 16950 Nominal / outside width in mm: 900 Belt width in mm: 750 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor sp ...

Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...