tp used for sale

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

RECON MWM TCG2020-V16 Part number: 1242 0453 HT837937 / TPS52-F33 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Tip height over bed top distance of 200 mm 1000-1500 mm Permissible diameter on bed 400 mm Permissible diameter on sled 230 mm bed Bed width 280 mm head Spindle passage 52 mm 6ʺ camlock spindle nose Speed Spindle speed 16 n. Values 36-2000 RPM. Feeding and tapping 72 longitudinal feed 0.05-4.45 mm / rev 72 cross feed 0.025-2.25 mm / rev 54 Whitwort Division 1-56 TPI 54 metric pitch 0.5-28 mm 54 English Division 1-32-1ʺ inch 54 Division of modular 0.25-14 mm 54 pitch Division 2-112 D.P.. Cross slide 470 mm Width 180 mm Maximum stroke 235 mm Cross slide Length 260 mm Width 120 mm Maximum stroke 150 mm Slewing range 360 degrees Counter tailstock Hollow shaft diameter 58 mm Hollow shaft length 265 mm Maximum stroke hollow shaft 120 mm Cone of the hollow shaft 4 C.M.. - MK Motor Power 4 kW

We offer: New Tetra Pak ® spare parts for TBA 8, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... -> In the list that we send to you on request. you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) ... Intermediate sale reserved Prices on request

Tetra Pak ® spare parts We can offer new or used Tetra Pak ® spare parts, -> We send you our list on request See list which we send on request to you

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

5-way combined iron worker with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: 0171793397130 built in 1993Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel scissors L-steel 90 °: 140 x 13 mmL-steel 45 °: 70 x 7 mmSteel bar scissors round / square: 45/42 mmNotching device: 10 mmHole punch punching force: 55 tProjection: 510 mmpunches: 30 in 16 mmStroke of the punch stepless: 0 - 60 mmNumber of strokes of the punch with 20 mm travel: 42 strokes / minDrive power: 5.5 kWWeight about 1500 kgWith- support tables- various accessoriesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We offer mostly new Tetra Pak spare parts -> We will send you our list on request - New Tetra Pak ® spare parts for TBA 8, TBA 3, A3 flex, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... In the list -> Sent on request you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 A3 flex PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) TBA 3 Tetra Pak Homogenizer ... Intermediate sale reserved

4-fold combined profile steel shears make PEDDINGHAUS type Peddimaster 80/110, built in 1993Technical specifications:FLAT STEEL SHEARS:500 x 18 mm:400x19mm:300x22mm:200x25mmKnife length: 510 mmPROFESSIONAL STEEL SHEARSAngle steel 90°: 120 x 13 mm:150x100x12mmAngle steel 45°: 100 x 10 mmRound bar: 45 mmSquare steel: 40 mmSQUARE NOTCHSheets up to: 13 mmLatch width: 65 mmNotch depth: 85 mmHOLE PUNCHPunching force: 80 tProjection: 510 mmStroke continuously adjustable: 10 - 30 mmHoles: 30 in 20 mm:27 in 20mmGENERAL MACHINE DATANumber of strokes: 22 / 16 h/minOil filling: 80 lDrive power: 7.5 kWWeight approx.: 2450 kgExternal dimensions approx.: 1990 x 850 x 1890 mmwith- stop table- 2 footswitches- Rectangular notcher- large lot of punches and matricesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

New Tetra Pak ® spare parts, -> We send you our list on request

5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

Pneumatic punching machine make EDEL type HP 16-600 SBFabr. -No: 20104Punching force: 16 tPunching capacity: 24 in 5 mmor: 40 in 3 mmor: 50 in 2 mmfor tools up to: 70 mmDischarge: 600 mmStamp recording: 24 Drm. x 85Die height: 78 mmRam stroke: 13 mmDistance scraper - die: 6.5 mmAir requirement per punching: 45 NLMachine weight: 600 kgExternal dimensions machine L x W: 300 x 1050 mmUnderframe: 1100 x 560 x 380 mmWith- Steel base- Material support table- Quick change tool setsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spare parts support: No. 4379: 1 gebr. Post assemblies to serial. RAMBAUDI, Rammatic 1201, type b. with HEIDENHAIN iTNC 530 Accessories: 1. milling head SK 50 / 22 kw / 3,600 - 40 min-1 2. clamping table with T-slots and grid plate 3500 x 1000 3. 30-fach tool magazine CANI 4. chip conveyor - INDASS. Type TPF, 5 Control Panel iTNC 530 - BJ. 2010 6 electronic Handwheel 7 measuring system / glass scale HEIDENHAIN LS 706 C / ML 2840 mm 8 measuring system / glass scale HEIDENHAIN LS 706 C / ML 1140 mm 9 measuring system / glass scale HEIDENHAIN LS 706 C / ML 1440 mm 10 Panel with various assemblies 11 feed / servo - motor SIEMENS

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

UWM WELDING ROTARY TABLE TYPE UWM 3 -Capaciteit of horizon eel 300 kg -Capaciteit vertikaal 150 kg -Panel of afmeting 450 mm -Tpm Omwentelingen 0.2/2 -90 degrees kantelbaar -Voetpedaal -Toerental digital uitlezing -Drieklauw met -Noodstop -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Hydr. Double-column drawing press make ECKOLD type UPP 60-10Mash. -No: 646/230 withHydraulic unit HAD 500/2, machine -No: 276/477Max. Press force: 60 tPassage between the uprights: 1400 mmTable width: 400 mmInstallation height: 650 mmWith- Tools for the production of drain potsxa0xa0xa0 for soil drainage, there are 3 sizes available- 2 drawing tools for top part of inlet boxesxa0xa0 Drm. 200 mm for 1.5 and 2.0 mm material thicknessused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

compressors / vacuumpumps Flowservice Sihi type KPHY-80540BNX6Y TB4 101 914 12, year 2016 and 2018, suitable for hot air and gas, with motor 90 kW, 985 tpm Price on request

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

34"/44" x 60" Mazak gap bed lathe Model: Rex, Specifications: Swing over bed ways . 34" Swing in removable gap .. 44" Swing over cross slide .. 24-1/2" Distance between centers 60" Hole thru spindle ... 4-1/16" Spindle nose D1-11" camlock Width of bed 22" Spindle speed range (16) 12 - 1200 rpm Longitudinal feed range . .00217" - .0331" ipr Cross feed range half of longitudinal setting Inch threading range (40) ... 4 - 56 tpi Metric threading range (23) . .5 - 7 mm Tailstock spindle travel 8" Tailstock spindle taper . #6mt Approximate floor space . 144"L x 60"W x 60"H Approximate weight .. 12,500 lbs

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Machine with painted aluminum structure, equipped with Lexan protections complete with micro safety. Easy to clean and accessible. Technical data: Length mm 3750 Width mm 2700 Height mm 2080 Sliding surface height mm 700 – 1000 Weight Kg 1600 Voltage Volt 400 Frequency Hz 50 / 60 Current A 11 Mechanical speed carton / min 200 Production characteristics: Case length mm 75 – 350 Case width mm 140 – 450 Case height mm 120 – 350 Equipped with: one input product feeding belt; pneumatic product elevation group; stainless steel AISI 304S stacked product collection hopper with independent motorization; product introduction group with own motorization complete with encoder. The machine is also equipped with inclined carton magazine with a capacity of about 50 cartons; carton picking unit, with suction cup arm with independent motor complete with encoder; carton tr ...

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

Reference number 20120 Brand MITSUBISHI Model S6A3 MPTK Power 600 hp RPM 1800 tpm General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 1 Governor HYDRAULIC Exhaust system WATER COOLED Turbo DRY Cooling system KEEL COOLING Starter ELECTRIC 24 V Remarks RUNNING ENGINE DIMENSIONS LxWxH (cm) 1636mm x 1036 mm x 1421 mm Weight (kg) 1900 KG

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 500, 750, 1000 mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 770 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small s ...

1 of used KHS/Kisters trayshrinkpacker model TSP 060 B (Basic) TPFO (suitable for packaging loose products as tray, tray + film, pad + film or film-only), new 2010, Rockwell (Allen Bradley) plc, capacity upto 60 packs/minute, operating direction: left to right. Can handle both clear and print-registered film. Quick change-over via servos and spindles. This equipment was originally supplied to pack diameter 66.5 mm (500 ml) and 67 mm (600 ml) PET bottles as 4x3=12 or 6x4=24 bottles loose either as tray + film, pad + film, or Film-Only. Only ran as Film-Only from day one. Last used for food cans 73 mm as 3x2=6 and 4x3=12 as well as 99 mm as 3x2=6 on tray + film.

This is an electric rectangular cooking kettle from the premium manufacturer Electrolux/Therma, type PBEN40EKEM (400 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal install ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 bis 6000 mm spindle bore: 155 mm turning dia. in gap: 1050 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 80 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm thread: 80 Stufen face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 250 kW weight of the machine ca.: 6550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1 ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 4000 mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm : MTS quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 2650 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed ...

turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 500 mm spindle cone: Gr. 11 number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: MT5 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m.  ...

This COMAU C4G SMART NH3-210-3.1-SH Robot machine was manufactured in 2007 in Latvia. It is a welding robot and it is controlled by a COMAU TP4i interface and weighs 2280kg. Contact us anytime for further information.

This Busellato Jet Optima T5 Wood working machine was manufactured in the year 2018. It is equipped with a TPA control unit and has 5 axis.

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 bis 5000 mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 80 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2710 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. v ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm bed width: 300 mm number of feeds: 42 longitudinal feeds:: 0,031 - 1,7 mm/U face slide travel: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,72 t dimensions of the machine ca.: 3,2 x 1,0 x 1,3 m Operating Instructions: englisch + französisch Qick Toolholders: ähnlichch Multifix A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick chan ...

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm spindle bore: 38 mm spindle turning speed range: 80 - 2000 (18) U/min upper slide-adjustment: 100 kW longitudinal feeds:: 0.052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm threading WHITWORTH: 58 - 8 TPI total power requirement: 1,1 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 1,6 x 0,75 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit.

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

turning diameter: 330 mm turning length: 1000 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 36 mm metrical thread cutting: 0,4 - 3 mm threading WHITWORTH: 56 - 4 TPI tailstock travel: 95 mm face slide travel: 160 mm number of spindle speeds: 70 - 2000 (8) U/min upper slide-adjustment: 68 mm longitudinal feeds:: 0,02 - 2,7 mm/U total power requirement: 1,5 mm weight of the machine ca.: 600 kg dimensions of the machine ca.: 1850 x 670 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.