toyo used for sale

TOYO full electric Si-180-S (180 ton) year `2017

Description Toyo hopper Capacity 125 litres new never used

Description Toyo hopper Capacity 60 litres new never used

Description Toyo hopper Capacity 120 litres new never used

Description Toyo hopper Capacity 120 litres new never used

Description Toyo hopper Capacity 120 litres new never used

Description Toyo hopper Capacity 60 litres new never used

Description Toyo hopper Capacity 60 litres new never used

Description Toyo hopper Capacity 125 litres new never used

No. 4635: 1 gebr. Electric drawbar forklift / high-lift truck 1 to Fabr. TOYOTA, Type 7 SM 10 / 24 V, Bauj. 2003 with nominal load capacity 1000 kg Arb.-Ber.: lifting height 2900 mm, Accessories: Charger 24 V

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc WELE - TOYODA AA1680 VMC X 1600 x Y 800 x Z 800 mm MACH - ID 6271 Make: WELE Type: TOYODA AA1680 Control: FANUC 18i-MB YOP: 2012 Hours: 3953 X – Travel    1.600 mm Y – Travel       800 mm Z – Travel       800 mm Table Length       1.750 mm Table Width     800 mm Table load         2.000 kg Spindle Taper     40 ISO/Bt/Mk Power on spindle      15 kW Speeds / ranges       12.000 Rpm ATC / revolver        48 Coolant true spindle / Bar        25 Number of controlled ax ...

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18 i MB MACH-id   4105 MAKE       TOYODA WELE TYPE         AA 1680 / FV 1680 YEAR        2012 SPECIFICATIONS X - Travel      1600 mm Y - Travel        800 mm Z - Travel         800 mm bed / plano / portal / moving column      VMC Controll     Fanuc 18 i MB Table Length x Width       1750 x 800 mm Table load in kG        2000 Kg Spindle Taper     Bt 50 kW power on spindle   15 kW Spindle speeds / ranges    12000 Rpm ATC tool changer      48 ...

Pallet length: 450 mm Pallet width: 450 mm Longitudinal X: 600 mm Cross Y: 600 mm Vertical Z: 600 mm Number of pallets: 0   Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 18i-MB X - Travel:               600mm Y - Travel:               600mm Z - Travel:               600mm B-Axis indexing:          360.000° Table Length:             450mm Table Width:              450mm Table load:               400 Number of pallets:        2 Feed rate X-Axis:         50000mm/min. Feed rate Y-Axis:         50000mm/min. Feed rate Z-Axis:         ...

Machine Details Stock-No. 1105-03882 Type of machine CNC Lathe - Inclined Bed Type Make ERNAULT TOYODA Type HES 52 Year of manufacture 1987 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details turning diameter 650 mm turning length 1100 mm control FANUC 10 T swing over bed 650 mm Spindle Bore 80 mm spindle turning speed range 7 - 4000 rpm transmission ratio 3 Rapid Traverse 12 m/min main drive 37 kW total power requirement 47 kW Weight of the machine approx. 12 t dimensions of the machine ca. 5 x 2.4 x 2. m Additional information 2-axes CNC-control FANUC 10 T 1 x 12-station turret VDI 50 programmable tailstock 3-jaw power chuck diameter 450 mm swarf conveyor

Electrohydraulic scissor fork stacker Lift truck, pallet truck for pallets TOYOTA / BT type HTH 10 E Fabr. No. 481795 Year of construction 2005 Load capacity 1000 kg Lifting height max. 800 mm Height drained 85 mm Fork length 1190 mm - Electric lift over 12 volts Battery operation - manual stroke via hand lever as in the pallet truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with IEC plug) Net weight 140 kg good condition; used

Machine Type: Pedestrian Stacker Manufacturer: BT / Toyota Type: SPE140L Year of construction: 2017 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price Vb Location Warstein , Germany Reference M-TOY-0324-6 DESCRIPTION We offer you a used pedestrian stacker from the manufacturer Toyota. Running hours 2,062 Lifting height 5400mm Load capacity 1400kg Weight incl. battery approx. 1700kg Traction battery and UVV at handover new Availability: from April 2024 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

Machine Type: Sideloader Manufacturer: BT Type: RRE 140 Year of construction: 2017 Condition: used / from liquidation Offer will only be sent if a complete imprint is provided! Price 4.950 Euro incl. 19% VAT from stock Warstein free loaded. Location Warstein , Germany Reference M-TOY-0324-1 DESCRIPTION We offer you a used sideloader from the manufacturer BT/Toyota incl. charger. Operating hours approx. 4798h Lifting height 5700mm Side shifter Load capacity 1400kg Weight incl. battery approx. 4t Incl. weight / lifting height display Incl. charger Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment t ...

This TOYODA FH63S Horizontal Machining center was manufactured in the year 2002. It is equipped with a Fanuc Series 16i-M control unit. The machine has a spindle speed of 15000 rpm.

Fork length: 1150mm, load capacity: 1.4 kg with a load center of 600mm, weight without battery: 278kg, battery weight: 45-55kg, lithium-ion battery and activation by PIN code, only 17 operating hours, can be inspected on site.

Clamping Force: 450 // Shot Weight (Max): 1865

Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyooki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD3-2W-BcA-025AY-WYD2 / HD3-2WD-BcA-025A-WYD2 -Pressure reducing valve: HG3H-P-D3-025Y -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Delivery/price: complete -Dimensions: 300/135/H250 mm -Total weight: 14.8 kg

Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyooki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD-2WD-BcA-025A-WY3 -Pressure reducing valve: HG3H-P-D3-025Y -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Delivery/price: complete -Dimensions: 255/185/H250 mm -Total weight: 12.7 kg

as good as new; very little used Towing capacity: 0.8 t Transport length: 0.64 m Transport height: 0.6 m Weight: 0.8 t Battery capacity: 24/34 V/Ah Series: W Tyres: 2x/2 Transport width: 0.48 m Drive power: 0.5 kW Battery weight: 0.068 t Travel speed with/without load: 3.5/4.5 km/h

CNC Lathe 2 axes ERNAULT TOYODA HES 52 Travel X: 365 mm Travel Z: 2130 mm Numerical Command: NUM 750 Maxi Ø on bench: 480 mm Maxi Ø over saddle: 400 mm Max machinable length between points: 1983 mm Spindle diameter: Ø 79,5 mm Spindle speed: from 50 to 4000 RPM Turret 12 tools VDI 50 Year of construction: 1990 Motor: 37 kW Tailstock: CM5 Dimensions (L x W x H): 4585 x 3160 x 2550 mm Total length: 6135 mm Weight: 14,5 T

travel -x axis: 1.000 mm travel -y axis: 850 mm travel -z axis: 750 mm spindle turning speed range: 35 - 6.000 U/min numbers of positions in the tool changer: 60 table dimension - longitudinal: 630 x 630 mm control: FANUC16i, Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindle speeds: 6.000 U/min tool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forklift Toyota Geneo-E 15. Year 2008, about 7200 working hours.

Type: FV 1165 Parameters: 1100 mm, 650 mm Manufacturer: Toyoda Year of production / SO / GO: 2010 / - / - Description: The machine is in good technical condition. X-axis feed: 1100 mm Y-axis feed: 650mm Z-axis feed: 600 mm Max. speed: 8000 rpm Number of tools in the magazine: 40 Work table dimensions: 1300 x 650 mm Upon agreement, the possibility of a tour in progress.

Key data: 750 mm, 800 mm, 850 mm

Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale

Toyota 8FGF18 forklift truck Serial: 10637 2013, forklift truck, capacity 1800Kgs, lifts to 4700mm, gas

Description: Frame number 2 FGH 10-12647 Approx. Onsite Dimension. (l x w x h): 3,200 x 900 x 2,000 mm, weight approx.: 3,000 kg

Description: 4-axis Inner coolant supply Operating hours 65,289 Spindle overhaul 2022 Tool holder HSK63 Hinged belt conveyor KNOLL 600 K-1 Belt filter system with high-pressure system  ,KNOLL year 2012, 70bar ( without automatic filling system for cooling water ) Tool changer LERIC FTS 360 year 2012, 360 places Pallet changer KUPA FPA 630 with 12 pallet spaces , Incl. approx. 260 tool holders consisting of various shrink-fit tool holders (without tool), supported by collets and Weldon holders  , z-motion: 600 mm, x-motion: 600 mm, y-motion: 600 mm, control: Fanuc 31i, numbers of pallets: 12, taper: HSK63, toolchanger positions: 370, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 10,000 x 4,000 mm

Description: 2-machines connected with 1 pallet station 4-axis IKZ X-600mm Y-600 Z-600 B-axis Spindle revision 2020 for one machine WT storage 360 each, total 720 WZ Tool holder HSK63 2 KNOLL 600 K-1 hinged belt conveyors 2 belt filter systems with KNOLL high-pressure system, 70 bar (without automatic filling system for cooling water) 2 LERIC tool changers with 360 places each 1 pallet changer with 2 PalTec FPA450 input stations with 42 pallet spaces connected to both machines, without clamping towers incl. approx. 260 tool holders per machine consisting of various shrink-fit tool holders (without tool), supplemented by collets and Weldon holders  , z-motion: 600 mm, max. workpiece weight between centers: 400 kg, x-motion: 600 mm, y-motion: 600 mm, control: Fanuc 31i-Model A, pallet table size: 450x450 mm, numbers of pallets: 42, taper: HSK63, power capacity - spindle: 18.5/22 kW, t ...

Description: Charger included loading capacity: 1,500 to, lifting height: 4,320 mm, length of forks: 1,200 mm, Approx. Onsite Dimension. (l x w x h): 2,580 x 990 x 2,140 mm, weight approx.: 3,000 kg, serial number: FSW-E811

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

Description: Lifting height: 3000 mm Lifting capacity: 1250 kg Fork length: approx. 1100 mm Operating hours read off: 8440 Incl. charger Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 2,100 mm, weight approx.: 1,500 kg

Description: 2 Ton lifting capacity fork length 900 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,900 x 2,500 mm, weight approx.: 2,000 kg

Spherical roller bearing NTN TOYO BEARING 24122 B Inner diameter: Ø 110 mm Outer diameter: Ø 180 mm height: 69 mm New ! Dimensions : 180 x 180 x 70 mm

Spherical roller bearing NTN TOYO BEARING 24124 BDI Inner diameter: Ø 120 mm outer diameter: Ø 200 mm height: 80 mm New ! Dimensions : 200 x 200 x 80 mm

Supplier-immersed car spare parts from warehouse dissolution, for export, cheap to hand over. Years built from 1988 to 1995 various brands, such as Audi, VW, BMW, Ford, Opel, Seat, Fiat, Mitsubishi, Toyota, etc. Various car spare parts, such as struts, axle legs, motors, gearboxes, etc. Prices and quantities on request.

Pallet entry shelf or Radio Shuttle shelf, up to 500kg / pallet, max. 1,890 pallet spaces, with storage space below the drive-in shelf, sale without shuttles - used -: Price from location: 49.500.-â?¬ (net) plus disassembly etc. Manufacturer Shelf: EAB A radio shuttle from Toyota or BT was used Built: 2008 Payload per pallet: max. 500kg Number of shelf planes: 3 drive-in planes Current pallet height: max. 1.70m Shelf depth: approx. 12.40m 45 channels a 14 pallets in a row Shelf height: must be submitted afterwards - should be about 9m Depth per channel: 14 pallets in a row Total width: approx. 65m The retractable shelf stands on a steel construction substructure! Basically, the retractable shelf could also be built without this construction! Condition: good (regularly maintained) Available: by arrangement Location: Prague Area

The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...

Power Supply LFE BR4G 2410-A1 ( BR4G2410-A1 ) 230 / 400 V AC 24 V DC 18 A spare part for Toyoda HES52 ! used, checked ! Dimensions: 290 x 140 x 140 mm

digital servo controller, AC Servo Driver GEC, NUM SA501SD NUMDRIVE SPINDLE spare part for Toyoda HES52 ! used, checked ! Dimensions: 380 x 240 x 650 mm

Electronic module, machine control NUM S.A. Type 760 3x Input / Output Module 1x Memory Module 2x Control Module 1x Input Module 1x Processor Module 1x Power Supply 220 V AC 50 / 60 Hz spare part for Toyoda HES52 ! used, tested ! Dimensions: 485 x 260 x 300 mm